Energy Systems Engineering / Enerji Sistemleri Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4752
Browse
9 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 6Effect of external electric field on fluidization of rodlike particles using CFD-DEM(American Chemical Society, 2024) Kazemi, Saman; Aali, Hamed; Larijani, Roxana Saghafian; Zarghami, Reza; Liu, Helei; Mostoufi, NavidGiven the significant impact of an external electric field on fluidized bed hydrodynamics and the practical importance of rodlike particles, this study examines the behavior of a fluidized bed containing rodlike particles under various external electric fields. Simulations were performed using a coupled computational fluid dynamics-discrete element method, and rodlike particles were generated using a multisphere approach aided by quaternions. The effect of different vertical and horizontal external electric fields on the orientation of particles was investigated. Also, the effect of particle size on their orientation in the presence of constant vertical and horizontal external electric fields was explored in this work. The results showed that increasing the electric field strength and reducing the size of rodlike particles lead to an increment in the tendency of particles to become oriented along the direction of the electric field. Moreover, the effect of the external electric field at various inlet gas velocities on the probability distribution of the porosity in the bed was studied. Finally, the effect of vertical and horizontal electric fields on the bubble diameter was examined. This study offers a deeper understanding of the fluidization of rodlike particles in the presence of an electric field, and its findings can be applied to design and optimize related processes.Article Citation - WoS: 17Citation - Scopus: 24A Gis-Based Fahp and Fedas Analysis Framework for Suitable Site Selection of a Hybrid Offshore Wind and Solar Power Plant(Elsevier B.V., 2023) Karipoğlu, Fatih; Ozturk, S.; Efe, B.This study presents a Geographic Information System (GIS) based suitable site selection methodology for a hybrid system that includes offshore wind and solar PV. The methodology utilizes open source databases about decision criteria and applies this data using GIS to determine suitable sites for offshore wind and solar PV systems. For the assessment of multi-criteria which affect the potential hybrid energy power plants and the determination of the best suitable areas, Fuzzy Analytical Hierarchy Process (FAHP) and Fuzzy Evaluation based on Distance Average Solution (FEDAS) are used in the study. Results show that technical criteria has the priority weight of 0.60 while the weight of social criteria is about 0.07. Among sub-criteria, the wind speed has the highest priority weight while distance to port and visibility are the highest criteria of priority weight under economic and social main criteria, respectively. Among the alternatives, Area 2 (A-2) is determined as the best alternative for hybrid offshore power plants in the study area. This proposed methodology can be utilized by decision-makers to determine the best suitable locations for hybrid offshore wind and solar PV systems at any location. This paper suggests a new approach integrating GIS, fuzzy setbased AHP and EDAS as a novelty. © 2023 International Energy InitiativeArticle Citation - WoS: 5Citation - Scopus: 5Exergetic Assessment of an Solar Powered Stand-Alone System Using Liquid Organic Hydrogen Carrier for Energy Storage(Elsevier, 2023) Palmero-Marrero, Ana I.; Zairov, Rüstem; Borge-Diez, David; Çağlar, Başar; Açıkkalp, Emin; Altuntaş, ÖnderThe integration of energy storage technologies into renewable energy systems has gained increasing attention for continuous supply of the renewable-based enegy. Among different storage alternatives, the use of a Liquid Organic Hydrogen Carrier (LOHC) has a significant potential as a reversible energy carrier for short and longterm energy storage. In this study, the technical and economic performance of an stand-alone renewable energy systems using a LOHC for energy storage have been evaluated by exergy-based methods in addition to simple energy and economic analysis. The analysis of the LOHC-free system was also included to determine the effect of LOHC on the system performance. The system containing phovoltaic (PV) panels, an electrolyzer, a micro gas turbine and hydrogenation/dehydrogenation LOHC units was designed to meet the power, heating and cooling requirement of a residential building. The system modelling and performance evaluation were made by using TRNSYS and EES softwares. Results show that the LOHC-containing system has higher energy and exergy efficiencies and exergoeconomic performance than the LOHC-free system while the latter is economically more feasible than the former due to its low capital investment cost.Review Citation - WoS: 21Citation - Scopus: 23A Comprehensive Review of Computational Fluid Dynamics Simulation Studies in Phase Change Materials: Applications, Materials, and Geometries(Springer, 2023) Soodmand, A. Mohammadian; Azimi, B.; Nejatbakhsh, S.; Pourpasha, H.; Farshchi, M. Ebrahimi; Aghdasinia, H.; Mohammadpourfard, Mousa; Heris, S. ZeinaliThermal energy storage systems (TESS) have emerged as significant global concerns in the design and optimization of devices and processes aimed at maximizing energy utilization, minimizing energy loss, and reducing dependence on fossil fuel energy for both environmental and economic reasons. Phase change materials (PCMs) are widely recognized as promising candidates due to their high latent heat storage (LHS) capacity. This review thoroughly evaluates the computational fluid dynamics (CFD) studies conducted in various sections, encompassing materials, modeling, simulation, as well as the results, advantages, and disadvantages of these works. The study is organized into three distinct sections. The first section discusses the applications of PCMs in various areas, including lithium-ion batteries, solar applications, building applications, electronics, and heating and cooling systems. The second section provides a comprehensive summary of cylindrical, rectangular, spherical, arbitrary shapes, and packed-bed geometries employed in TESS. The third section investigates the different types of materials used as PCMs. Based on the findings of this study, it can be concluded that industrial applications of hybrid nanocomposites incorporating PCMs in different geometries pose challenges, particularly in three-dimensional (3D) settings, where instability becomes a significant concern. Hence, further research and investigation are necessary to address these challenges adequately. In conclusion, this study serves as a reference review for future research endeavors in the field of simulating various PCMs in different geometries and applications. It provides valuable insights into the current state of knowledge, highlights potential areas for improvement, and offers guidance for advancing simulation techniques related to PCMs.Article Citation - WoS: 103Citation - Scopus: 113Preparation and Characterizations of Tio2/Zno Nanohybrid and Its Application in Photocatalytic Degradation of Tetracycline in Wastewater(Elsevier, 2023) Zeinali Heris, Saeed; Etemadi, Martin; Mousavi, Seyed Borhan; Mohammadpourfard, Mousa; Ramavandi, BahmanThe photodegradation of tetracycline antibiotics (TC) in an aqueous solution, using the TiO2 nanoparticles, ZnO microparticles, and TiO2/ZnO composite under the UV lamp in a continuous reactor, was performed. The effects of different parameters, such as the initial TC concentration, medium pH, ratio of each photocatalyst, and the flow rate were comprehensively studied. SEM, EDX, and XRD characterization techniques were employed to study the morphology and structure features of the prepared composite. The results revealed that a more significant amount of TC is not easily removed from wastewater. Furthermore, by increasing the pH of the medium to 11, the efficiency of TC degradation was increased, while the amount of removal remained stable at higher pH values. As the flow rate increased up to 190 mL/min, the removal efficiency increased; however, at higher flow rates, lower efficiency was obtained. Moreover, using multivariate analysis and response surface methodology (RSM), a model for removing TC and the effect of experimental parameters on removal efficiency was proposed. The optimal conditions using the RSM method were found to be the reduction efficiency of 78.94 % in pH = 11 (flow rate of 132 mL/min, and TiO2 concentration of 323 mg) and reduction efficiency of 75.89% in pH = 9 (flow rate of 143.19 mL/min and TiO2 concentration of 312.73 mg). © 2023 Elsevier B.V.Article Citation - WoS: 7Citation - Scopus: 7Comprehensive Thermoeconomic Study of a New Solar Thermosyphon-Assisted Multigeneration System(Elsevier, 2023) Anamaq, Rasoul Najafi; Khani, Leyla; Mohammadpourfard, Mousa; Heris, Saeed Zeinali; Gökçen Akkurt, GüldenNowadays, due to the global energy crisis, limited reservoirs of fossil fuels, and their negative environmental effects, the use of renewable energy sources and multigeneration systems have become good alternatives for conventional thermodynamic systems. One of these resources, whose technology has developed rapidly in recent years, is the use of solar energy for the simultaneous generation of various products. Therefore, in this research, a multigeneration system with several subsystems is introduced. The proposed system includes a solar energy collector to receive thermal energy, two thermal energy storage tanks, an organic Rankine cycle, and a Kalina cycle to generate electricity, a multi-effect distillation unit to produce fresh water, an electrolyzer to produce hydrogen, as well as heat recovery for hot water and hot air generation. In this multigeneration system, the cooling unit is designed with the help of a thermosyphon. The performance of the proposed system is studied from energy, exergy, environmental, and exergoeconomic viewpoints using Aspen HYSYS and EES software. The obtained results show that due to the addition of the thermosyphon unit to the refrigeration system, the exergy efficiency increases from 55.62% to 70.26%. As a result of this combination, the performance of the whole system is improved and the amount of costs are reduced. In addition, the parabolic collector system has the highest exergy destruction ratio, 39%, among the subsystems. Furthermore, the results of the exergoeconomic analysis indicate that the PEM water heater with 33.3% and the ejector with 22.7% own the highest cost destruction rates.Article Citation - WoS: 45Citation - Scopus: 31Highly Efficient Treatment of Petrochemical Spent Caustic Effluent Via Electro-Fenton Process for Cod and Toc Removal: Optimization and Experimental(Springer, 2023) Gholami, Asma; Mousavi, Seyed Borhan; Heris, Saeed Zeinali; Mohammadpourfard, MousaCaustic is commonly used in oil and gas refineries to remove CO2, H2S, organic sulfur, and acidic compounds; however, spent caustic must be treated considering the type of wastewater in refinery and petrochemical units due to their hazardous characteristics. This research aims to reduce the chemical oxygen demand (COD) and the total organic carbon (TOC) from the used caustic effluent of the olefin unit of Ilam Petrochemical Company employing the electro-Fenton method. The affecting parameters, such as H2O2 concentration, reaction time, pH, and current density on the COD and TOC removal rate, were investigated. An experimental design by response surface methodology (RSM) based on the Box–Behnken method with the considered factors was considered to study the setup’s effectiveness and optimize the conditions. The outcomes revealed that by increasing the H2O2 concentration from 11 to 18 mgL, the COD removal efficiency was enhanced from 68 to 93%. On the other hand, by increasing the reaction time after 15 min, the COD and TOC removal efficiency decreased. The same trend was observed by increasing the current density after the optimal value. The optimal conditions were acquired at pH = 4, current density = 20 mAcm2, H2O2 concentration = 18 mgL, and reaction time = 15 min. The promising results confirmed that the electro-Fenton could be an excellent treatment technique in Ilam Petrochemical Unit as a spent caustic treatment. © 2023, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.Article Citation - WoS: 4Citation - Scopus: 5Electrooxidation of Glycerol on Monometallic and Bimetallic Catalysts-Containing Porous Carbon Cloth Electrodes in an Alkaline Medium(Electrochemical Society, Inc., 2021) Çağlar, Başar; El Hassan, Youssef; Basak, Oğuzhan; Hepbaşlı, ArifThe electrooxidation of glycerol was studied on monometallic (Pt/C, Co/C, Ni/C, Cu/C) and bimetallic catalysts (PtCo/C, PtNi/C, PtCu/C) - containing porous carbon cloth electrodes in an alkaline medium to gain insight about the potentials of electrodes for simultaneous hydrogen and chemical production. Physical and chemical properties of catalysts were characterized by using X-ray diffraction, X-ray photoemission spectroscopy, and transmission electron microscopy while electrochemical characteristics of electrodes were investigated by cyclic voltammetry, choronoamperometry, and electrochemical impedance spectroscopy. Bimetallic catalysts-containing electrodes showed higher glycerol electrooxidation activities and stabilities compared to monometallic catalysts-containing electrodes. The highest activity was observed on the PtCu/C-containing electrode due to its higher electrochemical active surface area and low kinetic and mass transfer resistance. It was also found that the presence of porous carbon cloth had a considerable effect on the glycerol electrooxidation activity.Article Citation - WoS: 67Citation - Scopus: 74Suitable Site Selection for Offshore Wind Farms in Turkey’s Seas: Gis-Mcdm Based Approach(Springer, 2021) Genç, Mustafa Serdar; Karipoğlu, Fatih; Koca, Kemal; Azgın, Şükrü TanerOffshore wind energy resources are not fully exploited renewable energy resources until now and could play a crucial role in mitigating the impacts of climate change by the generation of renewable electricity. Planning processes such as technical, social, environmental, various agents, and political concerns are necessary for the development of offshore wind energy projects. The objective of this study was to assess the comprehensive feasibility of a desired offshore wind power plant applying Geographical Information Systems (GIS) and Multi-Criteria Decision-Making (MCDM) guidance for the coastal area of Turkey. Furthermore, EMODnet (the European Marine Observation and Data Network) was employed for data acquisition to unlock fragmented and hidden marine data resources and to facilitate investment in sustainable coastal and offshore activities. For the determination of potential site with Multi-Criteria Decision Maker Method, 3 main criteria Technical (C1), Environmental (C2), and Social (C3), and 13 sub-criteria were determined. Based on these criteria, the suitability map was created by using all criteria map layers with their buffer zones. The final map indicated that %1.38 (3294.8 km(2)) of Turkey Seas was suitable for offshore wind farms. The most suitable region was determined in the Marmara Sea with 1194 km(2). The Aegean Sea, the Black Sea, and the Mediterranean Sea were following the Marmara Sea in terms of the huge suitable regions respectively. It was apparent that the growth of offshore wind farms in Turkey would increase if the supporting mechanism and the necessary legislation were ensured.