Energy Systems Engineering / Enerji Sistemleri Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4752
Browse
4 results
Search Results
Book Part Citation - Scopus: 1A New Stable Solar System for Electricity, Cooling, Heating, and Potable Water Production in Sunny Coastal Areas(Springer, 2023) Khani, Leyla; Mohammadpourfard, MousaNowadays, more attention is paid to provide clean energy products with low environmental pollution in a decentralized way. Many coastal rural areas suffer from freshwater and electricity scarcity, especially in hot weather condition. Meanwhile, these regions have a great access to intense solar radiation and seawater. Hence, it seems logical to use the available solar energy in those places to provide to necessities like power, heating, and cooling. A new solar cooling, power, heating, and freshwater production system is designed, evaluated, and optimized in this research. The proposed system is composed of several subsystems to generate each product with high efficiency and reliability. Solar energy is unavailable at night, so molten salt energy storage is used to establish the steady operation of the system. Then, the system is evaluated from thermodynamic and exergoeconomic viewpoints, and a parametric study is accomplished to study the effect on the system performance of key variables. In the end, the system is optimized to determine its best operating condition for different cases. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.Article Citation - WoS: 7Citation - Scopus: 7Comprehensive Thermoeconomic Study of a New Solar Thermosyphon-Assisted Multigeneration System(Elsevier, 2023) Anamaq, Rasoul Najafi; Khani, Leyla; Mohammadpourfard, Mousa; Heris, Saeed Zeinali; Gökçen Akkurt, GüldenNowadays, due to the global energy crisis, limited reservoirs of fossil fuels, and their negative environmental effects, the use of renewable energy sources and multigeneration systems have become good alternatives for conventional thermodynamic systems. One of these resources, whose technology has developed rapidly in recent years, is the use of solar energy for the simultaneous generation of various products. Therefore, in this research, a multigeneration system with several subsystems is introduced. The proposed system includes a solar energy collector to receive thermal energy, two thermal energy storage tanks, an organic Rankine cycle, and a Kalina cycle to generate electricity, a multi-effect distillation unit to produce fresh water, an electrolyzer to produce hydrogen, as well as heat recovery for hot water and hot air generation. In this multigeneration system, the cooling unit is designed with the help of a thermosyphon. The performance of the proposed system is studied from energy, exergy, environmental, and exergoeconomic viewpoints using Aspen HYSYS and EES software. The obtained results show that due to the addition of the thermosyphon unit to the refrigeration system, the exergy efficiency increases from 55.62% to 70.26%. As a result of this combination, the performance of the whole system is improved and the amount of costs are reduced. In addition, the parabolic collector system has the highest exergy destruction ratio, 39%, among the subsystems. Furthermore, the results of the exergoeconomic analysis indicate that the PEM water heater with 33.3% and the ejector with 22.7% own the highest cost destruction rates.Article Citation - WoS: 9Citation - Scopus: 10Energy and Exergy Analysis of Combined Power, Methanol, and Light Olefin Generation System Fed With Shale Gas(Elsevier, 2022) Khani, Leyla; Tabriz, Zahra Hajimohammadi; Mohammadpourfard, Mousa; Gökçen Akkurt, GüldenEnvironmental problems and limitations of fossil fuel resources, especially crude oil, have intensified the importance of using cleaner and cheaper fuels besides enhancing energy conversion processes. Therefore, a novel power, methanol, and light olefin multi-generation system is designed and modeled in this paper. Chemical looping reforming, chemical looping combustion cycles, and Rankine power system are combined with methanol and light olefin production processes. The input fuel of the system is shale gas. The mass, energy, and exergy balance equations are applied for each system unit as a steady-state control volume to assess its thermodynamic operation. Then, the effects on the system performance of critical parameters are studied comprehensively. The results show that the necessary syngas can be supplied when 71.5% of the inlet shale gas is used in the steam reforming reactor of the chemical looping reforming cycle, and the steam to fuel ratio and carbon dioxide to fuel ratio are 0.61. Furthermore, if 31% of the produced methanol is consumed in the olefin production unit, the system energy and exergy efficiencies are achieved at 67.3% and 71.5%, respectively. In this case, the carbon dioxide flow rate is 800 kmol/hr, separated and stored in the chemical looping combustion cycle, leading to a clean thermodynamic system.Article Citation - WoS: 6Citation - Scopus: 8Thermodynamic Design, Evaluation, and Optimization of a Novel Quadruple Generation System Combined of a Fuel Cell, an Absorption Refrigeration Cycle, and an Electrolyzer(Wiley, 2022) Khani, Leyla; Mohammadpour, Mahsa; Mohammadpourfard, Mousa; Heris, Saeed Zeinali; Gökçen Akkurt, GüldenIn this article, a solid oxide fuel cell system is combined with a generator absorber heat exchanger absorption refrigeration cycle and a proton exchange membrane electrolyzer unit to use most of the fuel energy and recover waste heat and material. This quadruple-generation system produces electric power, refrigeration, heating, and hydrogen from natural gas as the primary energy source for the system. The thermodynamic and environmental performances of the system are studied comprehensively to identify the effects of the key operating parameters on the system operation. The results show that as fuel cell current density increases from 2000 to 8000 A/m2; the system energy and exergy efficiencies decrease by nearly 20%, but the unit carbon dioxide emission increases by 30.38%. Also, the energy and exergy efficiencies are maximized, and the unit carbon dioxide emission is minimized at a specified value of fuel utilization factor. Additionally, increasing the steam to carbon ratio has a damaging effect on the system efficiencies but leads to higher unit carbon dioxide emission. Then, the genetic algorithm is applied to optimize the condition, so the highest exergy efficiency is attainable. The optimization results demonstrate that an exergy efficiency as high as 0.6443 is achievable.