Energy Systems Engineering / Enerji Sistemleri Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4752
Browse
4 results
Search Results
Review Citation - Scopus: 5A Comparative Evaluation of Dark Fermentative Bioreactor Configurations for Enhanced Hydrogen Production(Springer, 2025) Gören, Ayşegül Yağmur; Dincer, I.; Khalvati, A.Energy from renewable resources has been growing in popularity, which ultimately helps reduce emissions of greenhouse gases (GHGs) and contaminants. Since hydrogen (H2) has a higher combustion production of energy than hydrocarbon fuels, it has been identified as a clean, sustainable, and environmentally friendly energy source. There are several benefits to producing biohydrogen (bioH2) from renewable sources, including lower cost and increased sustainability. Among the bioH2 production processes, dark fermentation supports commercialization and scale-up for industrial applications. This paper considers the various bioreactors, such as anaerobic sequencing batch, continuous stirred, up-flow, fixed-bed, and membrane reactors, and their operational approaches for bioH2 production. This review paper also performs the bibliometric analysis method to identify historical and current developments in a particular field of reactor configuration studies. Furthermore, the main variables influencing reactor performance and methods for increasing process efficiency considering economic and environmental aspects are addressed. The results revealed that continuously stirred reactors are widely utilized for bioH2 production as a cost-effective reactor configuration. Moreover, the membrane bioreactors and fixed-bed reactors are yielded higher bioH2 performance than other configurations. Nevertheless, high energy consumption and costs have presented the need for further development of reactors. Consequently, future recommendations to solve the critical problems faced in reactor configurations, the gaps in the literature, and the points that need improvement were comprehensively reported. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2025.Review Citation - WoS: 21Citation - Scopus: 23A Comprehensive Review of Computational Fluid Dynamics Simulation Studies in Phase Change Materials: Applications, Materials, and Geometries(Springer, 2023) Soodmand, A. Mohammadian; Azimi, B.; Nejatbakhsh, S.; Pourpasha, H.; Farshchi, M. Ebrahimi; Aghdasinia, H.; Mohammadpourfard, Mousa; Heris, S. ZeinaliThermal energy storage systems (TESS) have emerged as significant global concerns in the design and optimization of devices and processes aimed at maximizing energy utilization, minimizing energy loss, and reducing dependence on fossil fuel energy for both environmental and economic reasons. Phase change materials (PCMs) are widely recognized as promising candidates due to their high latent heat storage (LHS) capacity. This review thoroughly evaluates the computational fluid dynamics (CFD) studies conducted in various sections, encompassing materials, modeling, simulation, as well as the results, advantages, and disadvantages of these works. The study is organized into three distinct sections. The first section discusses the applications of PCMs in various areas, including lithium-ion batteries, solar applications, building applications, electronics, and heating and cooling systems. The second section provides a comprehensive summary of cylindrical, rectangular, spherical, arbitrary shapes, and packed-bed geometries employed in TESS. The third section investigates the different types of materials used as PCMs. Based on the findings of this study, it can be concluded that industrial applications of hybrid nanocomposites incorporating PCMs in different geometries pose challenges, particularly in three-dimensional (3D) settings, where instability becomes a significant concern. Hence, further research and investigation are necessary to address these challenges adequately. In conclusion, this study serves as a reference review for future research endeavors in the field of simulating various PCMs in different geometries and applications. It provides valuable insights into the current state of knowledge, highlights potential areas for improvement, and offers guidance for advancing simulation techniques related to PCMs.Article Citation - WoS: 67Citation - Scopus: 74Suitable Site Selection for Offshore Wind Farms in Turkey’s Seas: Gis-Mcdm Based Approach(Springer, 2021) Genç, Mustafa Serdar; Karipoğlu, Fatih; Koca, Kemal; Azgın, Şükrü TanerOffshore wind energy resources are not fully exploited renewable energy resources until now and could play a crucial role in mitigating the impacts of climate change by the generation of renewable electricity. Planning processes such as technical, social, environmental, various agents, and political concerns are necessary for the development of offshore wind energy projects. The objective of this study was to assess the comprehensive feasibility of a desired offshore wind power plant applying Geographical Information Systems (GIS) and Multi-Criteria Decision-Making (MCDM) guidance for the coastal area of Turkey. Furthermore, EMODnet (the European Marine Observation and Data Network) was employed for data acquisition to unlock fragmented and hidden marine data resources and to facilitate investment in sustainable coastal and offshore activities. For the determination of potential site with Multi-Criteria Decision Maker Method, 3 main criteria Technical (C1), Environmental (C2), and Social (C3), and 13 sub-criteria were determined. Based on these criteria, the suitability map was created by using all criteria map layers with their buffer zones. The final map indicated that %1.38 (3294.8 km(2)) of Turkey Seas was suitable for offshore wind farms. The most suitable region was determined in the Marmara Sea with 1194 km(2). The Aegean Sea, the Black Sea, and the Mediterranean Sea were following the Marmara Sea in terms of the huge suitable regions respectively. It was apparent that the growth of offshore wind farms in Turkey would increase if the supporting mechanism and the necessary legislation were ensured.Article Citation - WoS: 27Citation - Scopus: 34Use of Abandoned Oil Wells in Geothermal Systems in Turkey(Springer, 2020) Kaplanoğlu, Murat A.; Baba, Alper; Gökçen Akkurt, GüldenHuman beings have been benefiting from geothermal energy for different uses since the dawn of civilization in many parts of the world. One of the earliest uses of geothermal energy was for heating and it was used extensively by Romans in Turkey. The Aegean region is favored with a large number of thermal springs known since ancient times. However, it was in the twentieth century that geothermal energy was first used on a large scale for direct use applications and electricity generation. The country's installed heat capacity is 3322.3 MWt for direct use and 1347 MWe for power production. Also, many drilled wells to extract oil or natural gas were abandoned for various reasons in the southeast of Turkey. Some of the oil fields have heat content that can be used for geothermal energy. Some even have hot fluid in the reservoir. This paper presents an investigation into how to use geothermal energy in abandoned oil and natural gas wells. Methods used to generate geothermal energy from abandoned oil fields other than conventional geothermal energy production are examined. Downhole heat exchangers can be used to extract heat without producing geothermal fluid which decrease gas emissions to the atmosphere and energy need for reinjection, from the abandoned oil wells to generate electricity or direct use applications. Using this method, it is possible to use abandoned wells in southeastern Turkey where this energy improves the economy of the region.