Energy Systems Engineering / Enerji Sistemleri Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4752
Browse
23 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 6Effect of external electric field on fluidization of rodlike particles using CFD-DEM(American Chemical Society, 2024) Kazemi, Saman; Aali, Hamed; Larijani, Roxana Saghafian; Zarghami, Reza; Liu, Helei; Mostoufi, NavidGiven the significant impact of an external electric field on fluidized bed hydrodynamics and the practical importance of rodlike particles, this study examines the behavior of a fluidized bed containing rodlike particles under various external electric fields. Simulations were performed using a coupled computational fluid dynamics-discrete element method, and rodlike particles were generated using a multisphere approach aided by quaternions. The effect of different vertical and horizontal external electric fields on the orientation of particles was investigated. Also, the effect of particle size on their orientation in the presence of constant vertical and horizontal external electric fields was explored in this work. The results showed that increasing the electric field strength and reducing the size of rodlike particles lead to an increment in the tendency of particles to become oriented along the direction of the electric field. Moreover, the effect of the external electric field at various inlet gas velocities on the probability distribution of the porosity in the bed was studied. Finally, the effect of vertical and horizontal electric fields on the bubble diameter was examined. This study offers a deeper understanding of the fluidization of rodlike particles in the presence of an electric field, and its findings can be applied to design and optimize related processes.Article Stochastic 1-D Reactive Transport Simulations To Assess Silica and Carbonate Phases During the $co_2$ Reinjection Process in Metasediments(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2024) Erol, SelçukOne proposed method to mitigate carbon emission is to mineralize the $CO_2$ in deep geothermal reservoirs while mixing the coproduced CO2 with the effluent fluid for reinjection. The injection fluid temperature fluctuates due to the mixing process between CO2-charged water and the effluent fluid, and compressor interruptions change the thermodynamic conditions that influence the fluid- rock interaction in the reservoir. Mineral dissolution or precipitations are associated with changes in permeability and porosity that affect the flow and, eventually, the lifespan of the reservoir. A combined stochastic–reactive transport simulation approach is useful for inspection purposes. Moreover, the stochastic algorithm validates the deterministic reactive transport simulation and demonstrates the time evolution of a chemically reacting system in the reservoir. This study examines a range of injection temperatures between 80 °C and 120 °C to evaluate silica and calcite precipitation along a flow path. One-dimensional (1-D) reactive transport and compartment- based stochastic reaction-diffusion-advection Gillespie algorithms are carried out. The 1-D model represents a reservoir feed zone of around 2300 m. Two common metasediment rock types are evaluated for inspection. The first one is the muscovite schist, which has approximately 60% quartz, and the second is the quartz schist, consisting of roughly 90% quartz. The stochastic method can be applied more effectively if the chemical system is completely defined with proper reaction rates as a function of temperature. The mixing ratio of the coproduced $CO_2$ over the effluent fluid is around 0.0028. Simulation results show that $CO_2$ is partially sequestrated as calcite within the first 10 m of the entrance to the reservoir and plugs the pores completely in the muscovite schist scenario. Chalcedony and α-cristobalite precipitate as secondary minerals evenly along the flow path. $CO_2$ injection into a quartz schist layer is more appropriate for geochemical interactions below 120 °C.Article Citation - WoS: 17Citation - Scopus: 24A Gis-Based Fahp and Fedas Analysis Framework for Suitable Site Selection of a Hybrid Offshore Wind and Solar Power Plant(Elsevier B.V., 2023) Karipoğlu, Fatih; Ozturk, S.; Efe, B.This study presents a Geographic Information System (GIS) based suitable site selection methodology for a hybrid system that includes offshore wind and solar PV. The methodology utilizes open source databases about decision criteria and applies this data using GIS to determine suitable sites for offshore wind and solar PV systems. For the assessment of multi-criteria which affect the potential hybrid energy power plants and the determination of the best suitable areas, Fuzzy Analytical Hierarchy Process (FAHP) and Fuzzy Evaluation based on Distance Average Solution (FEDAS) are used in the study. Results show that technical criteria has the priority weight of 0.60 while the weight of social criteria is about 0.07. Among sub-criteria, the wind speed has the highest priority weight while distance to port and visibility are the highest criteria of priority weight under economic and social main criteria, respectively. Among the alternatives, Area 2 (A-2) is determined as the best alternative for hybrid offshore power plants in the study area. This proposed methodology can be utilized by decision-makers to determine the best suitable locations for hybrid offshore wind and solar PV systems at any location. This paper suggests a new approach integrating GIS, fuzzy setbased AHP and EDAS as a novelty. © 2023 International Energy InitiativeArticle Citation - WoS: 30Citation - Scopus: 30A Novel Data-Driven Model for the Effect of Mood State on Thermal Sensation(MDPI, 2023) Turhan, Cihan; Özbey, Mehmet Furkan; Ceter, Aydın Ege; Gökçen Akkurt, GüldenThermal comfort has an important role in human life, considering that people spend most of their lives in indoor environments. However, the necessity of ensuring the thermal comfort of these people presents an important problem, calculating the thermal comfort accurately. The assessment of thermal comfort has always been problematic, from past to present, and the studies conducted in this field have indicated that there is a gap between thermal comfort and thermal sensation. Although recent studies have shown an effort to take human psychology into account more extensively, these studies just focused on the physiological responses of the human body under psychological disturbances. On the other hand, the mood state of people is one of the most significant parameters of human psychology. Thus, this paper investigated the effect of occupants' mood states on thermal sensation; furthermore, it introduced a novel Mood State Correction Factor (MSCF) to the existing thermal comfort model. To this aim, experiments were conducted at a mixed-mode building in a university between 15 August 2021 and 15 August 2022. Actual Mean Vote (AMV) and Profile of Mood States (POMS) were used to examine the effect of mood state on thermal sensation. The outcomes of this study showed that in the mood states of very pessimistic and very optimistic, the occupants felt warmer than the calculated one and the MSCFs are calculated as -0.125 and -0.114 for the very pessimistic and very optimistic mood states, respectively. It is worth our time to note that the experiments in this study were conducted during the COVID-19 Global Pandemic and the results of this study could differ in different cultural backgrounds.Article Citation - WoS: 7Citation - Scopus: 8Update for Reactive Transport Modeling of the Kızıldere Geothermal Field To Reduce Uncertainties in the Early Inspections(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2023) Erol, Selçuk; Akın, Taylan; Akın, SerhatThe development of carbon capture and storage techniques has become essential to reduce and mitigating CO2 emissions to the atmosphere. CarbFix1 and CarbFix2 projects carried out in Iceland demonstrated that the emissions of waste CO2 gas from geothermal power plants can be captured and mixed with the effluent geofluid and subsequently injected back into the geothermal reservoir. This experience gained in the CarbFix projects expanded into other geothermal fields around Europe, and one of the demonstration sites is the geothermal field in Turkey, Kızıldere. This paper focuses on the results of an updated study on early field evaluations with reactive transport simulations. In the new three-dimensional numerical model, the geological formations and fault zones were updated according to the well-logs data. Based on the tracer tests performed in the field, the anisotropic permeabilities between the wells were evaluated and imposed into the model. Geofluid chemistry, mineral components, and the volume fractions used as input in the simulations are modified depending on the performed laboratory experiments on the metamorphic schists taken from the geothermal site (i.e. X-ray diffraction (XRD), energy dispersive X-ray (EDX), scanning-electron microscope (SEM), and batch reactor tests). Different thermodynamic databases such as Lawrance Livermore National Laboratory (LLNL) and Thermoddem databases were tested using PHREEQC and TOUGHREACT programs for consistency with experiments. The thermodynamic conditions and the geofluid-rock-CO2 interactions prevent the mineralization of CO2 in the reservoir. This outcome differs from CarbFix projects in terms of the carbonization process, but the CO2 injection is still reliable with solubility-trapping in a geothermal reservoir to partially mitigate the emission. Roughly, 200 kt of CO2 in 10 years can be safely injected into the geothermal reservoir. According to the new analysis, the ratio of magnesium, sodium, and potassium varies in solid solution series of feldspars and clay minerals as albite end-member and montmorillonite/illite end-members, respectively. The evaluations of solid solution reactions are relatively limited in the law of mass action approach used by PHREEQC and TOUGHREACT. © TÜBİTAK.Article Citation - WoS: 15Citation - Scopus: 18An Integrated Decision-Making Framework for Mitigating the Impact of Urban Heat Islands on Energy Consumption and Thermal Comfort of Residential Buildings(MDPI, 2023) Turhan, Cihan; Atalay, Ali Serdar; Gökçen Akkurt, GüldenUrban heat island (UHI) is a zone that is significantly warmer than its surrounding rural zones as a result of human activities and rapid and dense urbanization. Excessive air temperature due to the UHI phenomenon affects the energy performance of buildings and human health and contributes to global warming. Knowing that most of the building energy is consumed by residential buildings, therefore, developing a framework to mitigate the impact of the UHI on residential building energy performance is vital. This study develops an integrated framework that combines hybrid micro-climate and building energy performance simulations and multi-criteria decision-making techniques. As a case study, an urban area is analyzed under the Urban GreenUP project funded by the European Union's Horizon 2020 Programme. Four different strategies to mitigate the UHI effect, including the current situation, changing the low-albedo materials with high-albedo ones, nature-based solutions, and changing building facade materials, are investigated with a micro-climatic simulation tool. Then, the output of the strategies, which is potential air temperature, is used in a dynamic building energy simulation software to obtain energy consumption and thermal comfort data of the residential buildings in the case area. Finally, a multi-criteria decision-making model, using real-life criteria, such as total energy consumption, thermal comfort, capital cost, lifetime and installation flexibility, is used to make a decision for decreasing the UHI effect on residential energy performance of buildings. The results showed that applying NBSs, such as green roofs and changing existing trees with high leaf area density ones, have the highest ranking among all mitigation strategies. The output of this study may help urban planners, architects, and engineers in the decision-making processes during the design phase of urban planning.Article Citation - WoS: 7Citation - Scopus: 7Dynamic Development of Geochemical Reaction Fronts During Hydraulic Stimulation of Shale(Elsevier, 2023) Noel, Vincent; Druhan, Jennifer L.; Gündoğar, Aslı; Kovscek, Anthony R.; Brown Jr, Gordon E.; Bargar, John R.Injection of acidic hydraulic fracture fluid (HFF) into shale formations for unconventional oil/gas production results in chemical reactions in the shale matrix that can alter fluid transport. Here, we report the results of set of experiments designed to evaluate the impact of calcite dissolution as a function of carbonate mineral content on matrix chemical reactivity and pore-space modification concomitant with imbibition. We tracked acidic HFF transport in four samples of Wolfcamp shale with calcite contents varying from 4% to 59% by monitoring the rate and spatial extent of bromide tracer transport using synchrotron-based X-ray fluorescence microprobe (XFM) imaging. Concurrently, we also carried out XFM imaging of the spatial distribution of Ca in the Wolfcamp shale cores (as a proxy of calcite distribution). Our approach thus yields a direct record of time-resolved selective ion transport resulting from the penetration of acidic HFF and the associated mineral transformations in the shale cores. We show that the variability in calcite content of Wolfcamp shale samples can directly affect the rate and spatial extent of imbibition. Although reaction of the acidic HFF with carbonates in shales enhances calcite dissolution and increases porosity, the spatial extent of calcite dissolution in the shale matrix is limited due to a rapid neutralization of pH. The relative abundance and spatial distribution of calcite control the chemical saturation state of the HFF progressing into the matrix. As a result, calcite has a major impact on the spatial extent and rate of matrix alteration and thus on HFF transport during subsurface reservoir stimulation. Consequently, increased calcite content in the shale matrix inhibits the spatial extent of the pore-volume increase and, by extension, the spatial extent and rate of imbibition. Our results thus show that the overall rates of calcite dissolution approach the rates of acidic HFF transport (i. e., Damko spacing diaeresis hler number similar to 1), which could contribute to the efficiency of subsurface reservoir stimulation. A better understanding of HFF-calcite reaction rates is crucial for improving the prediction and optimization of fluid transport across HFF-shale interfaces during hydraulic fracturing.Article Citation - WoS: 23Citation - Scopus: 27The Influence of Meteorological Parameters on Pm10: a Statistical Analysis of an Urban and Rural Environment in İzmir/Turkiye(MDPI, 2023) Birim, Necmiye Gulin; Turhan, Cihan; Atalay, Ali Serdar; Gökçen Akkurt, GüldenAir pollution is a substantial menace, especially in industrialized urban zones, which affects the balance of the environment, life of vital organisms and human health. Besides the main causes of air pollution such as dense urbanization, poor quality fuels and vehicle emissions, physical environment characteristics play an important role on air quality. Therefore, it is vital to understand the relationship between the characteristics of the natural environment and air quality. This study examines the correlations between the PM10 pollutant data and meteorological parameters such as temperature (T-air), relative humidity (RH), and wind speed (WS) and direction (WD) under the European Union's Horizon 2020 project. Two different zones (Vilayetler Evi as an urban zone and Sasali Natural Life Park as a rural zone) of Izmir Province in Turkiye are used as a case study and the PM10 data is evaluated between 1 January 2017 and 31 December 2021. A one-tailed t-test is used in order to statistically determine the relationships between the PM10 pollutant data and meteorological parameters. As a further study, practical significance of the parameters is investigated via the effect size method and the results show that the RH is found to be the most influencing parameter on the PM10 for both zones, while T-air is found to be statistically non-significant.Article Citation - WoS: 29Citation - Scopus: 33The Effect of Heat Transfer Characteristics of Macromolecule Fouling on Heat Exchanger Surface: a Dynamic Simulation Study(Wiley, 2023) Karimi Shoar, Zahra; Pourpasha, Hadi; Zeinali Heris, Saeed; Mousavi, Seyed Borhan; Mohammadpourfard, MousaAt the city gate gas pressure reduction stations (CGSs), to prevent natural gas from forming a hydrate in the throttle valve, the natural gas is heated by the heater before reaching the pressure relief valve. Heat exchangers are an essential component of industrial processes that contribute significantly to total system energy. Since the element impacting heat exchanger performance is the fouling process, all fouling processes and models were dynamically simulated in this study. Through coding in the C++ language and simultaneous use of fluent functions, or, in other words, user-defined function (UDF), fouling-related models were defined for this software. The dynamic simulation was performed, and parameters such as fouling strength and layer thickness were calculated. The effects of changing operating conditions, such as gas inlet velocity, surface temperature, and fouling species concentration on fouling growth, were also evaluated. As the concentration of fouling species increased, the fouling rate also increased. The amount of supersaturation and fouling rate increased as the surface temperature increased. Due to the operational limitations of the system, to reduce the fouling rate, the gas inlet velocity should be as high as possible, and the fluid inlet temperature, surface temperature, and concentration of fouling species should be as low as possible. In this study, the required time to reach the efficiency of 70% of the heat exchanger was calculated using the modelling of this chamber, which was equivalent to 190 days. Additionally, the critical thickness of the fouling layer at this time was 3.5 cm.Article Citation - WoS: 2Citation - Scopus: 3Air Density Calculation at High Altitude Locations for Wind Energy Use: the Alpines Validation(Taylor & Francis, 2023) Bingöl, FerhatAtmospheric air density has an essential role in the energy production of wind turbines. It is directly proportional to the power taken out from the airflow. The common practice at a planned wind farm location is to measure atmospheric parameters and calculate the air density as monthly and yearly averages based on the International Committee for Weights and Measures (CIPM). After that, the reference point is used to calibrate spatial data to study the siting of wind turbines at a large spatial domain of interest using an engineering method based on only temperature and elevation a.m.s.l. The engineering method is also employed with only temperature and elevation data when there are no pressure and relative humidity measurements. The point-to-spatial transformation is done through the simplified engineering formula, and it is known that the method is primarily valid up to (Formula presented.) a.m.s.l. Above these elevations, the engineering methods have a significant bias, up to (Formula presented.) error in estimating the air density. This bias leads to a substantial error in energy yield estimations. This study uses more than one in-situ measurement at high altitude locations to calibrate the engineering method at the Alpine Convention Perimeter. It aims to improve the calculation accuracy by calculating the pressure gradient within the region. It is found that the seasonal and yearly averaging errors can be improved by (Formula presented.) to (Formula presented.) in the air density calculation with the new approach. The method can be applied to other locations with similar conditions.
- «
- 1 (current)
- 2
- 3
- »