Energy Systems Engineering / Enerji Sistemleri Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4752
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Article Citation - WoS: 30Citation - Scopus: 30A Novel Data-Driven Model for the Effect of Mood State on Thermal Sensation(MDPI, 2023) Turhan, Cihan; Özbey, Mehmet Furkan; Ceter, Aydın Ege; Gökçen Akkurt, GüldenThermal comfort has an important role in human life, considering that people spend most of their lives in indoor environments. However, the necessity of ensuring the thermal comfort of these people presents an important problem, calculating the thermal comfort accurately. The assessment of thermal comfort has always been problematic, from past to present, and the studies conducted in this field have indicated that there is a gap between thermal comfort and thermal sensation. Although recent studies have shown an effort to take human psychology into account more extensively, these studies just focused on the physiological responses of the human body under psychological disturbances. On the other hand, the mood state of people is one of the most significant parameters of human psychology. Thus, this paper investigated the effect of occupants' mood states on thermal sensation; furthermore, it introduced a novel Mood State Correction Factor (MSCF) to the existing thermal comfort model. To this aim, experiments were conducted at a mixed-mode building in a university between 15 August 2021 and 15 August 2022. Actual Mean Vote (AMV) and Profile of Mood States (POMS) were used to examine the effect of mood state on thermal sensation. The outcomes of this study showed that in the mood states of very pessimistic and very optimistic, the occupants felt warmer than the calculated one and the MSCFs are calculated as -0.125 and -0.114 for the very pessimistic and very optimistic mood states, respectively. It is worth our time to note that the experiments in this study were conducted during the COVID-19 Global Pandemic and the results of this study could differ in different cultural backgrounds.Article Citation - WoS: 15Citation - Scopus: 18An Integrated Decision-Making Framework for Mitigating the Impact of Urban Heat Islands on Energy Consumption and Thermal Comfort of Residential Buildings(MDPI, 2023) Turhan, Cihan; Atalay, Ali Serdar; Gökçen Akkurt, GüldenUrban heat island (UHI) is a zone that is significantly warmer than its surrounding rural zones as a result of human activities and rapid and dense urbanization. Excessive air temperature due to the UHI phenomenon affects the energy performance of buildings and human health and contributes to global warming. Knowing that most of the building energy is consumed by residential buildings, therefore, developing a framework to mitigate the impact of the UHI on residential building energy performance is vital. This study develops an integrated framework that combines hybrid micro-climate and building energy performance simulations and multi-criteria decision-making techniques. As a case study, an urban area is analyzed under the Urban GreenUP project funded by the European Union's Horizon 2020 Programme. Four different strategies to mitigate the UHI effect, including the current situation, changing the low-albedo materials with high-albedo ones, nature-based solutions, and changing building facade materials, are investigated with a micro-climatic simulation tool. Then, the output of the strategies, which is potential air temperature, is used in a dynamic building energy simulation software to obtain energy consumption and thermal comfort data of the residential buildings in the case area. Finally, a multi-criteria decision-making model, using real-life criteria, such as total energy consumption, thermal comfort, capital cost, lifetime and installation flexibility, is used to make a decision for decreasing the UHI effect on residential energy performance of buildings. The results showed that applying NBSs, such as green roofs and changing existing trees with high leaf area density ones, have the highest ranking among all mitigation strategies. The output of this study may help urban planners, architects, and engineers in the decision-making processes during the design phase of urban planning.Article Citation - WoS: 23Citation - Scopus: 27The Influence of Meteorological Parameters on Pm10: a Statistical Analysis of an Urban and Rural Environment in İzmir/Turkiye(MDPI, 2023) Birim, Necmiye Gulin; Turhan, Cihan; Atalay, Ali Serdar; Gökçen Akkurt, GüldenAir pollution is a substantial menace, especially in industrialized urban zones, which affects the balance of the environment, life of vital organisms and human health. Besides the main causes of air pollution such as dense urbanization, poor quality fuels and vehicle emissions, physical environment characteristics play an important role on air quality. Therefore, it is vital to understand the relationship between the characteristics of the natural environment and air quality. This study examines the correlations between the PM10 pollutant data and meteorological parameters such as temperature (T-air), relative humidity (RH), and wind speed (WS) and direction (WD) under the European Union's Horizon 2020 project. Two different zones (Vilayetler Evi as an urban zone and Sasali Natural Life Park as a rural zone) of Izmir Province in Turkiye are used as a case study and the PM10 data is evaluated between 1 January 2017 and 31 December 2021. A one-tailed t-test is used in order to statistically determine the relationships between the PM10 pollutant data and meteorological parameters. As a further study, practical significance of the parameters is investigated via the effect size method and the results show that the RH is found to be the most influencing parameter on the PM10 for both zones, while T-air is found to be statistically non-significant.Article Citation - WoS: 77Citation - Scopus: 95Sustainable Use of Apple Pomace (ap) in Different Industrial Sectors(MDPI, 2022) Gołębiewska, Ewelina; Kalinowska, Monika; Yıldız, GürayIn many countries, apple pomace (AP) is one of the most produced types of agri-food waste (globally, it is produced at a rate of ~4 million tons/year). If not managed properly, such bio-organic waste can cause serious pollution of the natural environment and public health hazards, mainly due to the risk of microbial contamination. This review shows that AP can be successfully reused in different industrial sectors—for example, as a source of energy and bio-materials—according to the idea of sustainable development. The recovered active compounds from AP can be applied as preservatives, antioxidants, anti-corrosion agents, wood protectors or biopolymers. Raw or processed forms of AP can also be considered as feedstocks for various bioenergy applications such as the production of intermediate bioenergy carriers (e.g., biogas and pyrolysis oil), and materials (e.g., biochar and activated carbon). In the future, AP and its active ingredients can be of great use due to their non-toxicity, biodegradability and biocompatibility. Given the increasing mass of produced AP, the commercial applications of AP could have a huge economic impact in the future.Article Citation - WoS: 19Citation - Scopus: 21Integration of Energy-Efficient Ventilation Systems in Historic Buildings—review and Proposal of a Systematic Intervention Approach(MDPI, 2021) Rieser, Alexander; Pfluger, Rainer; Troi, Alexandra; Herrera-Avellanosa, Daniel; Thomsen, Kirsten Engelund; Rose, Jorgen; Durmuş Arsan, Zeynep; Gökçen Akkurt, Gülden; Kopeinig, Gerhard; Guyot, GaëlleHistoric building restoration and renovation requires sensitivity to the cultural heritage, historic value, and sustainability (i.e., building physics, energy efficiency, and comfort) goals of the project. Energy-efficient ventilation such as demand-controlled ventilation and heat recovery ventilation can contribute to the aforementioned goals, if ventilation concepts and airflow distribution are planned and realized in a minimally invasive way. Compared to new buildings, the building physics of historic buildings are more complicated in terms of hygrothermal performance. In particular, if internal insulation is applied, dehumidification is needed for robust and risk-free future use, while maintaining the building's cultural value. As each ventilation system has to be chosen and adapted individually to the specific building, the selection of the appropriate system type is not an easy task. For this reason, there is a need for a scientifically valid, systematic approach to pair appropriate ventilation system and airflow distribution solutions with historical buildings. This paper provides an overview of the interrelationships between heritage conservation and the need for ventilation in energy-efficient buildings, regarding building physics and indoor environmental quality. Furthermore, a systematic approach based on assessment criteria in terms of heritage significance of the building, building physics (hygrothermal performance), and building services (energy efficiency, indoor air quality, and comfort rating) according to the standard EN 16883:2017 are applied.Article Citation - WoS: 27Citation - Scopus: 29The Utilization of Plum Stones for Pellet Production and Investigation of Post-Combustion Flue Gas Emissions(MDPI, 2020) Dolzynska, Magdalena; Obidzinski, Slawomir; Piekut, Jolanta; Yıldız, GürayAgri-food waste is generated at various food cycle stages and is considered to be a valuable feedstock in energy systems and chemical syntheses. This research identifies the potential and suitability of a representative agri-food waste sample (i.e., plum stones) as a solid fuel. Ground plum stones containing 10, 15, and 20 wt.% of rye bran were subjected to pelletization. The pelletizer was operated at 170, 220, and 270 rpm, and its power demand for the mixture containing 20 wt.% of rye bran was 1.81, 1.89, and 2.21 kW, respectively. Such pellets had the highest quality in terms of their density (814.6 kg.m(-3)), kinetic durability (87.8%), lower heating value (20.04 MJ.kg(-1)), and elemental composition (C: 54.1 wt.%; H: 6.4 wt.%; N: 0.73 wt.%; S: 0.103 wt.%; Cl: 0.002 wt.%; O: 38.2 wt.%). Whole plum stones and pellets were subjected to combustion in a 25 kW retort grate boiler in order to determine the changes in the concentrations of NO, SO2, CO, CO2, HCl, and O-2 in the post-combustion flue gas. Collected results indicate that plum stone-rye bran pellets can serve as effective substitutes for wood pellets in prosumer installations, meeting the Ecodesign Directive requirements for CO and NO.