Electrical - Electronic Engineering / Elektrik - Elektronik Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/11
Browse
8 results
Search Results
Now showing 1 - 8 of 8
Article Citation - WoS: 10Citation - Scopus: 13User Selection and Codebook Design for Noma-Based High Altitude Platform Station (haps) Communications(IEEE, 2022) Cumalı, İrem; Özbek, Berna; Karabulut Kurt, Güneş; Yanıkömeroğlu, HalimHigh altitude platform station (HAPS) communications have made a tremendous impact on recent research into sixth-generation (6G) and beyond wireless networks. The large coverage area and significant computational capability of HAPS systems enable many areas of utilization in 6G and beyond applications, including Internet of Things (IoT) services, augmented reality, and connected autonomous vehicles. In addition, non-orthogonal multiple access (NOMA) is a cutting-edge technology that can be utilized to enhance spectral efficiency in HAPS systems. In this paper, we exploit NOMA-based HAPS communications and multiple antennas to meet the connectivity, reliability, and high-data-rate requirements of 6G and beyond applications. We propose a user selection and correlation-based user pairing algorithm for a NOMA-based multi-user HAPS system. Moreover, we investigate the codebook design for HAPS communication and adapt the polar-cap codebook (PCC) to the HAPS channel which shows Rician fading propagation characteristics dominated by the line-of-sight (LOS) component. Performance evaluations show that the proposed user selection algorithm is perfectly suited to the HAPS channel and that the PCC provides a remarkable spectral efficiency.Article Citation - WoS: 7Citation - Scopus: 10Analysis of Crosstalk Effects in Phase-Otdr System Using Fiber Bragg Grating Array(Elsevier, 2023) Koçal, Ertunga Burak; Yüksel, Kıvılcım; Wuilpart, MarcIn this paper, the parasitic components (i.e., multi-reflections, Rayleigh scattering, photodetector noise, and phase variations due to external perturbations) are analysed and based on this analysis, a new signal to noise ratio (SNR) definition is provided suitable for the FBG-assisted Phase-OTDR system. A detailed analysis of performance parameters in the presence of multi reflection crosstalk (including its first- and second-order components) and spectral shadowing crosstalk is presented. SNR was calculated for different reflectivity and spacing lengths showing that the maximum number of cascaded FBGs can be significantly increased by using lower FBG reflectivity. It was also observed that the spacing length distance does not have a significant impact on the maximum number of FBGs that can be interrogated. By comparing single-pulse and double-pulse configurations, the use of double pulse was shown to provide higher SNR values when the number of FBGs is around 100 FBGs. The multi-reflection crosstalk when combined with the spectral-shadowing effect was demonstrated to create secondary crosstalk components making the interpretation of spectral analysis more difficult.Article Citation - WoS: 3Citation - Scopus: 3Current Sensing Using a Phase-Sensitive Optical Time Domain Reflectometer: Feasibility Study(Elsevier, 2022) Wuilpart, Marc; Şirin, Şamil; Yüksel Aldoğan, KıvılcımA novel method for distributed current sensing using an FBG-assisted Phase-OTDR with Mach-Zehnder Interferometer is proposed. The detrimental effect of the intrinsic linear birefringence of the sensing fiber is solved by calibration. An FBG pair is written at the two ends of the spun fiber coil to eliminate phase fading and increase the measurement accuracy. A simulation tool was developed to reveal the feasibility of the approach by investigating the impact of the detector noise as well as the effects of bending- and FBG-induced linear birefringence on the sensing performance.Article Citation - WoS: 3Citation - Scopus: 3Reconstructions of Effective Parameters for a Metamaterial Antenna Via 3d-Printed Components(Taylor & Francis, 2022) Yılmaz, Hasan Önder; Yaman, FatihThis study presents the reconstruction of effective medium parameters for a double negative metamaterial slab from the knowledge of the measured/simulated S-matrix. The structure initially has been designed to embed into a patch antenna for a radar application. To observe the medium characteristics, we locate the slab in a rectangular waveguide for various orientations. The waveguide-based retrieval method is applied to find parameters regarding the biaxial anisotropic medium. Fundamental mode is used for the excitation. Additive printing technology is employed to manufacture a rectangular waveguide and its adapters for the experiments. The metallization is achieved by coating the printed structures with conductive thin layers. Experimental setups for each orientation are simulated as well. We illustrate good agreements between simulation and measurements under the fabrication tolerances. The feasibility and applicability of the additive printing technology for the investigations of the metamaterial anisotropic/bianisotropic nature is reported.Article Citation - WoS: 4Citation - Scopus: 4A Symmetrical Self-Diplexing Microstrip Antenna With Eight-Shaped Defects(Taylor & Francis, 2022) Karatay, AnılThis article aims to demonstrate the simulation and measurement results of a two-port and symmetrical microstrip antenna operating at 6.6 and 7 GHz frequencies. The essential advantages of the antenna in terms of numerical electromagnetism are that the geometry has a small electrical length at both frequencies, does not use a structure that requires extra computational load such as substrate integrated waveguide, and is symmetrical, thus reducing the mesh requirement by half. The proposed antenna was manufactured with the chemical etching method and the measurement results were presented. In addition, varying operating frequencies are shown with the aid of liquid metal to experimentally demonstrate the independent redesign/reconfigurability feature of the antenna. To further reduce the fabrication cost, the manufacturing process of the proposed antenna with the help of a 3D printer is explained, and the performance parameters are compared. Good agreement between simulations and measurements has been reported.Article Citation - WoS: 3Citation - Scopus: 5Event Distortion-Based Clustering Algorithm for Energy Harvesting Wireless Sensor Networks(Springer, 2021) Al-Qamaji, Ali; Atakan, BarışWireless sensor networks (WSNs) consist of compact deployed sensor nodes which collectively report their sensed readings about an event to the Base Station (BS). In WSNs, due to the dense deployment, sensor readings can be spatially correlated and it is nonessential to transmit all their readings to the BS. Therefore, for more energy efficient, it is vital to choose which sensor node should report their sensed readings to the BS. In this paper, the event distortion-based clustering (EDC) algorithm is proposed for the spatially correlated sensor nodes. Here, the sensor nodes are assumed to harvest energy from ambient electromagnetic radiation source. The EDC algorithm allows the energy-harvesting sensor nodes to select and eliminate nonessential nodes while maintain an acceptable level of distortion at the BS. To measure the reliability, a theoretical framework of the distortion function is first derived for both single-hop and two-hop communication scenarios. Then, based on the derived theoretical framework, the EDC algorithm is introduced. Through extensive simulations, the performance of the EDC algorithm is evaluated in terms of achievable distortion level, number of alive nodes and harvested energy levels. As a result, EDC algorithm can successfully exploit both the spatial correlation and energy harvesting to improve the energy efficiency while preserving an acceptable level of distortion. Furthermore, the performance comparisons reveal that the two-hop communication model outperforms the single-hop model in terms of the distortion and energy-efficiency.Article Citation - WoS: 3Citation - Scopus: 4Quasi-Supervised Strategies for Compound-Protein Interaction Prediction [article](Wiley-VCH Verlag, 2021) Çakı, Onur; Karaçalı, BilgeIn-silico compound-protein interaction prediction addresses prioritization of drug candidates for experimental biochemical validation because the wet-lab experiments are time-consuming, laborious and costly. Most machine learning methods proposed to that end approach this problem with supervised learning strategies in which known interactions are labeled as positive and the rest are labeled as negative. However, treating all unknown interactions as negative instances may lead to inaccuracies in real practice since some of the unknown interactions are bound to be positive interactions waiting to be identified as such. In this study, we propose to address this problem using the Quasi-Supervised Learning (QSL) algorithm. In this framework, potential interactions are predicted by estimating the overlap between a true positive dataset of compound-protein pairs with known interactions and an unknown dataset of all the remaining compound-protein pairs. The potential interactions are then identified as those in the unknown dataset that overlap with the interacting pairs in the true positive dataset in terms of the associated similarity structure. We also address the class-imbalance problem by modifying the conventional cost function of the QSL algorithm. Experimental results on GPCR and Nuclear Receptor datasets show that the proposed method can identify actual interactions from all possible combinations.Article Citation - WoS: 6Citation - Scopus: 10Surface Chemistry Dependent Toxicity of Inorganic Nanostructure Glycoconjugates on Bacterial Cells and Cancer Cell Lines(Elsevier, 2023) Sancak, Sedanur; Yazgan, İdris; Bayarslan, Aslı Uğurlu; Ayna, Adnan; Evecen, Senanur; Taşdelen, Zehra; Gümüş, Abdurrahman; Sönmez, Hamide Ayçin; Demir, Mehmet Ali; Demir, Sosin; Bakar, Fatma; Dilek Tepe, HafizeSurface functionalized nanostructures have outstanding potential in biological applications owing to their target-specific design. In this study, we utilized laboratory synthesized carbohydrate-derivatives (i.e., galactose, mannose, lactose, and cellobiose derivatives) for aqueous one-pot synthesis of gold (Au) and silver (Ag) nanostructure glycoconjugates (NSs), and iron metal-organic framework glycoconjugates (FeMOFs). This work aims to test whether differences in the surface chemistry of the inorganic nanostructures play roles in revealing their toxicities towards bacterial cells and cancerous cell lines. As of the first step, biological activity of AuNSs, AgNSs, and FeMOFs were tested against a variety of gram (−) and gram (+) bacterial strains, where AgNSs possessed moderate to high antibacterial activities against all the tested bacterial strains, while AuNSs and FeMOFs showed their bacterial toxicity mostly depending on the strain. Minimum inhibitory concentration (MIC) and Minimum bactericidal concentration (MBC) determination studies were performed for the nanostructure glycoconjugates, for which μg/mL MBC values were obtained such as (Cellobiose p-aminobenzoic acid_AgNS) CBpAB_AgNS gave 50 μg/mL MBC value for P.aeruginosa and S.kentucy. The activity of selected sugar ligands and corresponding glycoconjugates were further tested on MDA-MB-231 breast cancer and A549 lung cancer cell lines, where selective anticancer activity was observed depending on the surface chemistry as well. Besides, D-penicillamine was introduced to galectin specific sugar ligand coated AuNS glycoconjugates, which showed very strong anticancer activities even at low doses. Overall, the importance of this work is that the surface chemistry of the inorganic nanostructures can be critical to reveal their toxicity towards bacterial cells and cancerous cell lines.