Electrical - Electronic Engineering / Elektrik - Elektronik Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/11
Browse
2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 4Citation - Scopus: 4A Symmetrical Self-Diplexing Microstrip Antenna With Eight-Shaped Defects(Taylor & Francis, 2022) Karatay, AnılThis article aims to demonstrate the simulation and measurement results of a two-port and symmetrical microstrip antenna operating at 6.6 and 7 GHz frequencies. The essential advantages of the antenna in terms of numerical electromagnetism are that the geometry has a small electrical length at both frequencies, does not use a structure that requires extra computational load such as substrate integrated waveguide, and is symmetrical, thus reducing the mesh requirement by half. The proposed antenna was manufactured with the chemical etching method and the measurement results were presented. In addition, varying operating frequencies are shown with the aid of liquid metal to experimentally demonstrate the independent redesign/reconfigurability feature of the antenna. To further reduce the fabrication cost, the manufacturing process of the proposed antenna with the help of a 3D printer is explained, and the performance parameters are compared. Good agreement between simulations and measurements has been reported.Article Citation - WoS: 7Citation - Scopus: 8Compact Wideband Tapered-Fed Printed Bow-Tie Antenna With Rectangular Edge Extension(John Wiley and Sons Inc., 2019) Bozdağ, Göksenin; Seçmen, MustafaIn this article, a wideband printed bow-tie antenna is designed entire band of GPS (L5), PCS, IMT-2000, Bluetooth, Wi-Fi, WiMAX bands, and the most of frequency range of UWB. Apart from the traditional designs, the proposed antenna includes tapered printed line with a feeding point patch and triangular bows with rectangular edge extensions, which makes the antenna more compact. The antenna realized at the frequency band of 1.49-9.5 GHz (more than 6.3:1 ratio bandwidth) has the dimensions of 122mmx56mm (0.61(0)x0.28(0)). According to measurement results, the realized gain varies between almost 1 and 6.5 dBi with 4.44dBi average, which are in good agreement with simulation results. Radiation patterns at the lower frequencies of operating band show dipole like radiation pattern with higher cross-pol discrimination levels while they degrade at the higher frequencies due to increase in gain.