Sürdürülebilir Yeşil Kampüs Koleksiyonu / Sustainable Green Campus Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7755
Browse
13 results
Search Results
Article Citation - WoS: 20Citation - Scopus: 23Estimation of Suspended Sediment Concentration in Rivers Using Acoustic Methods(Springer Verlag, 2009) Elçi, Şebnem; Aydın, Ramazan; Work, Paul A.Acoustic Doppler current meters (ADV, ADCP, and ADP) are widely used in water systems to measure flow velocities and velocity profiles. Although these meters are designed for flow velocity measurements, they can also provide information defining the quantity of particulate matter in the water, after appropriate calibration. When an acoustic instrument is calibrated for a water system, no additional sensor is needed to measure suspended sediment concentration (SSC). This provides the simultaneous measurements of velocity and concentration required for most sediment transport studies. The performance of acoustic Doppler current meters for measuring SSC was investigated in different studies where signal-to-noise ratio (SNR) and suspended sediment concentration were related using different formulations. However, these studies were each limited to a single study site where neither the effect of particle size nor the effect of temperature was investigated. In this study, different parameters that affect the performance of an ADV for the prediction of SSC are investigated. In order to investigate the reliability of an ADV for SSC measurements in different environments, flow and SSC measurements were made in different streams located in the Aegean region of Turkey having different soil types. Soil samples were collected from all measuring stations and particle size analysis was conducted by mechanical means. Multivariate analysis was utilized to investigate the effect of soil type and water temperature on the measurements. Statistical analysis indicates that SNR readings ob tained from the ADV are affected by water temperature and particle size distribution of the soil, as expected, and a prediction model is presented relating SNR readings to SSC mea surements where both water temperature and sediment characteristics type are incorporated into the model. The coefficients of the suggested model were obtained using the multivariate anal ysis. Effect of high turbidity conditions on ADV performance was also investigated during and after rain events.Article Citation - WoS: 15Citation - Scopus: 17Genetic Algorithm-Based Discharge Estimation at Sites Receiving Lateral Inflows(American Society of Civil Engineers (ASCE), 2009) Tayfur, Gökmen; Barbetta, Silvia; Moramarco, TommasoThe genetic algorithm (GA) technique is applied to obtain optimal parameter values of the standard rating curve model (RCM) for predicting, in real time, event-based flow discharge hydrographs at sites receiving significant lateral inflows. The standard RCM uses the information of discharge and effective cross-sectional flow area at an upstream station and effective cross-sectional flow area wave travel time later at a downstream station to predict the flow rate at this last site. The GA technique obtains the optimal parameter values of the model, here defined as the GA-RCM model, by minimizing the mean absolute error objective function. The GA-RCM model was tested to predict hydrographs at three different stations, located on the Upper Tiber River in central Italy. The wave travel times characterizing the three selected river branches are, on the average, 4, 8, and 12h. For each river reach, seven events were employed, four for the model parameters' calibration and three for model testing. The GA approach, employing 100 chromosomes in the initial gene pool, 75% crossover rate, 5% mutation rate, and 10,000 iterations, made the GA-RCM model successfully simulate the hydrographs observed at each downstream section closely capturing the trend, time to peak, and peak rates with, on the average, less than 5% error. The model performance was also tested against the standard RCM model, which uses, on the contrary to the GA-RCM model, different values for the model parameters and wave travel time for each event, thus, making the application of the standard RCM for real time discharge monitoring inhibited. The comparative results revealed that the RCM model improved its performance by using the GA technique in estimating parameters. The sensitivity analysis results revealed that at most two events would be sufficient for the GA-RCM model to obtain the optimal values of the model parameters. A lower peak hydrograph can also be employed in the calibration to predict a higher peak hydrograph. Similarly, a shorter travel time hydrograph can be used in GA to obtain optimal model parameters that can be used to simulate floods characterized by longer travel time. For its characteristics, the GA-RCM model is suitable for the monitoring of discharge in real time, at river sites where only water levels are observed.Article Citation - WoS: 28Citation - Scopus: 30Hydrochemical and Isotopic Composition of Tuzla Geothermal Field (canakkale-Turkey) and Its Environmental Impacts(Taylor and Francis Ltd., 2009) Baba, Alper; Yüce, Galip; Deniz, Ozan; Yasin, DidemTuzla is an active geothermal area located in northwestern Turkey, 80 km south of the city of Canakkale and 5 km from the Aegean Coast. Geothermal brine, deriving from this area, contains an abundance of NaCl and a water temperature of 173°C (T1 well at 814 m depth) is typically encountered. The aim of this study was to determine the hydrogeochemical properties of the geothermal brine using both chemical and isotopic data, and to investigate the origin of the geothermal brine in the Tuzla area and the environmental impacts of Tuzla Geothermal Field (TGF). Both geothermal brine and shallow groundwater in the area are of meteoric origin. Isotope results indicate that the hot saline waters (brine) in the Tuzla geothermal field originate from connate water along faults. As the saline water rises to the surface, it mixes with shallow groundwaters in various ratios. In addition, the high sodium (Na) and chloride (Cl) content in the Tuzla Stream, fed from the Tuzla geothermal brine during the dry season, cause an increase in sodium and chloride concentrations in the shallow groundwaters by infiltration into the aquifer. Moreover, salt accumulation on the surface is observed due to the uncontrolled artesian flow of geothermal brine, which adversely affects the salinity of shallow groundwater.Article Citation - WoS: 37Citation - Scopus: 49Predicting Suspended Sediment Loads and Missing Data for Gediz River, Turkey(American Society of Civil Engineers (ASCE), 2009) Ülke, Aslı; Tayfur, Gökmen; Özkul, SevinçPrediction of suspended sediment load (SSL) is important for water resources quantity and quality studies. The SSL of a stream is generally determined by direct measurement of the suspended sediment concentration or by employing sediment rating curve method. Although direct measurement is the most reliable method, it is very expensive, time consuming, and, in many instances, problematic for inaccessible sections, especially during floods. On the other hand, measuring precipitation and flow discharge is relatively easier and hence, there are more rain and flow gauging stations than SSL gauging stations in Turkey. Furthermore, due to its cost, measurements of SSL are carried out in longer periods compared to precipitation and flow measurements. Although daily precipitation and flow measurements are available for most of the Turkish river basins, at best semimonthly measurements are available for SSL. As such, it is essential to predict SSL from precipitation and flow data and to fill the gap for the missing data records. This study employed artificial intelligence methods of artificial neural networks (ANN) and neurofuzzy inference system, the sediment rating curve method, multilinear regression, and multinonlinear regression methods for this purpose. The comparative analysis of the results showed that the artificial intelligence methods have superiority over the other methods for predicting semimonthly suspended sediment loads. The ANN using conjugate gradient optimization method showed the best performance among the proposed models. It also satisfactorily generated daily SSL data for the missing period record of Gediz River, Turkey.Article Citation - WoS: 26Citation - Scopus: 31Groundwater Quality and Hydrogeochemical Properties of Torbali Region, Izmir, Turkey(Springer Verlag, 2008) Tayfur, Gökmen; Kırer, Tuğba; Baba, AlperThe large demand for drinking, irrigation and industrial water in the region of Torbalö (Izmir, Turkey) is supplied from groundwater sources. Almost every factory and farm has private wells that are drilled without permission. These cause the depletion of groundwater and limiting the usage of groundwater. This study investigates spatial and temporal change in groundwater quality, relationships between quality parameters, and sources of contamination in Torbali region. For this purpose, samples were collected from 10 different sampling points chosen according to their geological and hydrogeological properties and location relative to factories, between October 2001 and July 2002. Various physical (pH, temperature, EC), chemical (calcium, magnesium, potassium, sodium, chloride, alkalinity, copper, chromium, cadmium, lead, zinc) and organic (nitrate, nitrite, ammonia, COD and cyanide) parameters were monitored. It was observed that the groundwater has bicarbonate alkalinity. Agricultural contamination was determined in the region, especially during the summer. Nitrite and ammonia concentrations were found to be above drinking water standard. Organic matter contamination was also investigated in the study area. COD concentrations were higher than the permissible limits during the summer months of the monitoring period.Article Citation - WoS: 5Citation - Scopus: 5Kinematic Wave Theory for Transient Bed Sediment Waves in Alluvial Rivers(American Society of Civil Engineers (ASCE), 2008) Singh, Vijay P.; Tayfur, GökmenTransient bed sediment waves in alluvial rivers have been described using a multitude of hydraulic formulations. These formulations are based on some form of the St. Venant equations and conservation of mass of sediment in suspension and in bed. Depending on the assumptions employed, a hierarchy of formulations is expressed. These formulations in the literature employ uncoupled, semicoupled, or fully coupled transport models treating the sediment waves as either hyperbolic (dynamic wave) or parabolic (diffusion wave). It is, however, hypothesized that the movement of bed sediment waves in alluvial rivers can be described as a kinematic wave. Kinematic wave theory employs a functional relation between sediment transport rate and concentration and a relation between flow velocity and depth. This study summarizes the hierarchy of the formulations while emphasizing the kinematic wave theory for describing transient bed sediment waves. The applicability of the theory is shown for laboratory flume data and hypothetical cases.Article Citation - WoS: 16Citation - Scopus: 18Kinematic Wave Model of Bed Profiles in Alluvial Channels(John Wiley and Sons Inc., 2006) Tayfur, Gökmen; Singh, Vijay P.A mathematical model, based on the kinematic wave (KW) theory, is developed for describing the evolution and movement of bed profiles in alluvial channels. The model employs a functional relation between sediment transport rate and concentration, a relation between flow velocity and depth and Velikanov's formula relating suspended sediment concentration to flow variables. Laboratory flume and field data are used to test the model. Transient bed profiles in alluvial channels are also simulated for several hypothetical cases involving different water flow and sediment concentration characteristics. The model-simulated bed profiles are found to be in good agreement with what is observed in the laboratory, and they seem theoretically reasonable for hypothetical cases. The model results reveal that the mean particle velocity and maximum concentration (maximum bed form elevation) strongly affect transient bed profiles.Article Citation - WoS: 22Citation - Scopus: 28The Impact of Rail Transit Investment on the Residential Property Values in Developing Countries: The Case of Izmir Subway, Turkey(Emerald Group Publishing Ltd., 2006) Çelik, Hüseyin Murat; Yankaya, UğurPurpose The purpose of this paper is to test whether the rail transit investment in Izmir, Turkey has had positive valuation impacts on the surrounding residential properties, and to estimate the value of travel time using relevant parameters. Design/methodology/approach The necessary data were collected via a survey including all real-estate agents in the area. To test the research question, the Hedonic Price Model (HPM) is used as the research technique. The obtained parameters are also used to estimate the value of travel time. Findings The findings of the models has indicated that the proximity to rail stations was valued at $250-300 per meters, and the value of travel per hour was $1.47-1.83 on average. Research limitations/implications These findings should be checked with more consistent database using transaction process, and the mortgage loan rate which was not legislated at the time of study. Practical implications Until a mortgage loan rate is registered in turkey, the estimated parameters can be used in the cost-benefit analysis of rail transit investments in Turkey. Originality/value The theoretical premise that “any improvement in accessibility will be capitalized into the land values” is tested one more time in a developing country case whose urban environment is substantially different from those of the developed world, especially the North American cities. Furthermore, a new methodology using the HPM parameters is also suggested to estimate the value of travel time.Article Citation - WoS: 17Citation - Scopus: 19Kinematic Wave Model for Transient Bed Profiles in Alluvial Channels Under Nonequilibrium Conditions(John Wiley and Sons Inc., 2007) Tayfur, Gökmen; Singh, Vijay P.Transient bed profiles in alluvial channels are generally modeled using diffusion (or dynamic) waves and assuming equilibrium between detachment and deposition rates. Equilibrium sediment transport can be considerably affected by an excess (or deficiency) of sediment supply due to mostly flows during flash floods or floods resulting from dam break or dike failure. In such situations the sediment transport process occurs under nonequilibrium conditions, and extensive changes in alluvial river morphology can take place over a relatively short period of time. Therefore the study and prediction of these changes are important for sustainable development and use of river water. This study hence developed a mathematical model based on the kinematic wave theory to model transient bed profiles in alluvial channels under nonequilibrium conditions. The kinematic wave theory employs a functional relation between sediment transport rate and concentration, the shear-stress approach for flow transport capacity, and a relation between flow velocity and depth. The model satisfactorily simulated transient bed forms observed in laboratory experiments.Article Citation - WoS: 10Citation - Scopus: 14Numerical Model for Sediment Transport Over Nonplanar, Nonhomogeneous Surfaces(American Society of Civil Engineers (ASCE), 2004) Tayfur, Gökmen; Singh, Vijay P.Sediment transport on surfaces with spatially variable microtopography, roughness, and infiltration was investigated using the diffusion wave equation. An implicit finite-difference scheme together with multivariate Newton's method was employed to solve the equation numerically. The simulation results showed that microtopography and roughness were the dominant factors causing significant spatial variations in sediment concentration. If the spatially varying microtopography was replaced by an average constant slope, the result was an overestimation of the sediment load. On the other hand, when the spatially varying roughness was replaced by the average roughness and the spatially varying infiltration rate by the average infiltration rate, the sediment discharge was not significantly affected. The sedimentograph reached an equilibrium much sooner when a constant infiltration rate was substituted for the time-varying infiltration rate.