Sürdürülebilir Yeşil Kampüs Koleksiyonu / Sustainable Green Campus Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7755
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Article Citation - WoS: 5Citation - Scopus: 5Effect of Chain Topology on Plasmonic Properties of Pressure Sensor Films Based on Poly(acrylamide) and Au Nanoparticles(Elsevier Ltd., 2019) Topçu, Gökhan; Demir, Mustafa MuammerAu nanoparticles have been recognized as a colorimetric sensing element in polymeric systems because clustering shifts the red color of individual particles into saturated blue due to distinct plasmonic variation. The mechanism of pressure sensing is based on the disintegration of the particle clusters into the individual particles in polymers upon application of pressure. Polymers are usually composed of linear chains that provide a viscoelastic medium for their diffusion. Changing topology of polymer chains from linear to crosslinked under fixed pressure makes a clear change in spectral features of the particles probably due to the hindrance of particle diffusion by the crosslinking points. Therefore, the working range of the sensor films can be increased to higher-pressure values. In this work, polyacrylamide/Au nanoparticle films were prepared by various concentrations of formaldehyde as a crosslinking agent from 0.5 to 5.0 wt %. The initial absorption signal gradually shifts from 690 to 545 nm for linear chains upon application of pressure while shifting goes down to 571 nm for crosslinked ones. The colorimetric change is also examined under humid environments. Contrary to the crosslinking process, humid environment facilitates the diffusion of particles since the chains swell with water molecules that provide a convenient medium for particle diffusion.Conference Object Citation - WoS: 2Citation - Scopus: 4Monitoring Excimer Formation of Perylene Dye Molecules Within Pmma-Based Nanofiber Via Flim Method(SPIE, 2016) İnci, Mehmet Naci; Açıkgöz, Sabriye; Demir, Mustafa MuammerConfocal fluorescence lifetime imaging microscopy method is used to obtain individual fluorescence intensity and lifetime values of aromatic Perylene dye molecules encapsulated into PMMA based nanofibers. Fluorescence spectrum of aromatic hydrocarbon dye molecules, like perylene, depends on the concentration of dye molecules and these dye molecules display an excimeric emission band besides monomeric emission bands. Due to the dimension of a nanofiber is comparable to the monomer emission wavelength, the presence of nanofibers does not become effective on the decay rates of a single perylene molecule and its lifetime remains unchanged. When the concentration of perylene increases, molecular motion of the perylene molecule is restricted within nanofibers so that excimer emission arises from the partially overlapped conformation. As compared to free excimer emission of perylene, time-resolved experiments show that the fluorescence lifetime of excimer emission of perylene, which is encapsulated into NFs, gets shortened dramatically. Such a decrease in the lifetime is measured to be almost 50 percent, which indicates that the excimer emission of perylene molecules is more sensitive to change in the surrounding environment due to its longer wavelength. Fluorescence lifetime measurements are typically used to confirm the presence of excimers and to construct an excimer formation map of these dye molecules.Article Citation - WoS: 6Citation - Scopus: 7Utilization of Electrospun Polystyrene Membranes as a Preliminary Step for Rapid Diagnosis(John Wiley and Sons Inc., 2016) Işık, Tuğba; Horzum, Nesrin; Yıldız, Ümit Hakan; Liedberg, Bo; Demir, Mustafa MuammerRecent advances in clinical practice drive deoxyribonucleic acid (DNA) as an important class of biomarker. Monitoring the change in their concentration suggests the initiation and/or progression of various disorders. However, low quantity of DNA biomarkers in body fluids requires a delicate isolation methodology that provides efficient separation and easy handling. This study describes a newer-generation separation technology relying on electrospun fibers of sub-micrometer diameter of a commodity polymer for DNA biomarkers in simulative serum. Fibrous polystyrene membranes are prepared by electrospinning and they are subjected to post-modification with Au. The composite membranes may provide a convenient environment for the removal of bovine serum albumin (BSA) from BSA and DNA mixtures. The eluent can be used as an efficient tool for detection of DNA biomarkers associated with diagnosis of numerous life-threatening diseases.Article Citation - WoS: 30Citation - Scopus: 36Hydrogeological Properties of Hyper-Saline Geothermal Brine and Application of Inhibiting Siliceous Scale Via Ph Modification(Elsevier Ltd., 2015) Baba, Alper; Demir, Mustafa Muammer; Koç, Gonca A.; Tuğcu, CelalScaling is a major obstacle in harnessing of geothermal energy from the geothermal resources. This paper presents a case study for inhibition of metal silicate scaling using formic acid, harvesting more energy in particular case of Tuzla Geothermal Field (TGF), located on Biga Peninsula, in the northwestern of Turkey. TGF is 5. km far from Aegean Sea and 80. km south of Çanakkale. Geothermal fluid of TGF has high salinity (EC. > 91. mS/cm) and medium temperature (reservoir temperature is 173. °C). The acidification of high-salinity brine to mitigate silicate scaling is examined. Results of the study showed that a compromise between scaling and corrosion is achieved by reducing pH of brine to <6 using 55. ppm formic acid.Article Citation - WoS: 35Citation - Scopus: 45Types of the Scaling in Hyper Saline Geothermal System in Northwest Turkey(Elsevier Ltd., 2014) Demir, Mustafa Muammer; Baba, Alper; Atilla, Vedat; İnanlı, MustafaTuzla is an active geothermal area located in northwestern Turkey, 80km south of the city of Canakkale and 5km from the Aegean Coast. The geothermal brine from this area, which is dominated by NaCl, has a typical temperature of 173°C. Rapid withdrawal of fluid to ambient surface conditions during sampling causes precipitation of various compounds known as scaling. Scaling is one of the important problems in Tuzla geothermal system that reduces the efficiency of the geothermal power plant and causes economical loss. The aim of this study was to determine the type of scaling as a first step towards preventing its formation. The scales formed in the geothermal system were divided into two groups according to location: the ones that formed in downhole and the ones that accumulated along the surface pipeline. Both scales were examined in terms of their elemental composition, structure and morphology using XRF, XRD, and SEM, respectively. The former was found to be mainly composed of PbS (Galena) and CaCO3 (aragonite or calcite). In contrast, the latter was heterogeneous in nature and consisted of mainly saponite like amorphous structure along with submicrometer-sized amorphous silica particles, layered double magnesium and iron hydroxide, and NaCl.Article Citation - WoS: 6Citation - Scopus: 6Investigation of the Spontaneous Emission Rate of Perylene Dye Molecules Encapsulated Into Three-Dimensional Nanofibers Via Flim Method(Springer Verlag, 2014) Açıkgöz, Sabriye; Demir, Mustafa Muammer; Yapaşan, Ece; Kiraz, Alper; Ünal, Ahmet A.; İnci, Mehmet NaciThe decay dynamics of perylene dye molecules encapsulated in polymer nanofibers produced by electrospinning of polymethyl methacrylate are investigated using a confocal fluorescence lifetime imaging microscopy technique. Time-resolved experiments show that the fluorescence lifetime of perylene dye molecules is enhanced when the dye molecules are encapsulated in a three-dimensional photonic environment. It is hard to produce a sustainable host with exactly the same dimensions all the time during fabrication to accommodate dye molecules for enhancement of spontaneous emission rate. The electrospinning method allows us to have a control over fiber diameter. It is observed that the wavelength of monomer excitation of perylene dye molecules is too short to cause enhancement within nanofiber photonic environment of 330 nm diameters. However, when these nanofibers are doped with more concentrated perylene, in addition to monomer excitation, an excimer excitation is generated. This causes observation of the Purcell effect in the three-dimensional nanocylindrical photonic fiber geometry.