Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
8 results
Search Results
Article Citation - WoS: 44Citation - Scopus: 53Smart Phone Assisted Detection and Quantification of Cyanide in Drinking Water by Paper Based Sensing Platform(Elsevier Ltd., 2017) İncel, Anıl; Akın, Osman; Çağır, Ali; Yıldız, Ümit Hakan; Demir, Mustafa MuammerAn organometallic dye, europium tetrakis dibenzoylmethide triethylammonium (EuD4TEA) and gold nanoparticles (Au NPs) impregnated paper based sensor platform have been utilized for development of fluorescence turn-on cyanide assay in aqueous media. The ordinary filter paper with 6 μ m pore size were employed as solid support that facilitates impregnation of EuD4TEA and gold nanoparticles and provides durability. Detection mechanism relying on two processes (i) dissolution of gold nanoparticles causing fluorescence recovery and (ii) ligand exchange of triethyl amine with CN group stimulating cyanide specific fluorescence enhancement. The paper platform exhibit naked eye distinguishable color transition upon CN− addition from 10−2 to 10−12 M. To standardize the methodology a homemade image processing algorithm has been developed that enabling calibration of color change and quantify CN− concentration. The described algorithm is applicable to Android smart phones and facilitate transforming these devices into a quantitative cyanide detector. The overall methodology provides instrument free cyanide detection and therefore rapid control of water quality and safety at off-field conditions.Article Citation - Scopus: 2Enthalpy-Driven Selective Loading of Cdse0.75s0.25 Nanoalloys in Triblock Copolymer Polystyrene-B(Elsevier Ltd., 2016) Aşkın, Görkem; Çeçen, Volkan; Ünlütürk, Seçil Sevim; Özçelik, Serdar; Demir, Mustafa MuammerCdSe0.75S0.25 nanoalloys were blended with asymmetric triblock copolymer of polystyrene-b-polyisoprene-b-polystyrene(PS-SIS) in tetrahydrofuran. The fraction of styrene block varies from 14 to 22% with respect to isoprene by mass. The morphology of the copolymer cast film experiences a phase change from cylinder to lamella. CdSe0.75S0.25 nanoalloys were prepared by two-phase method. The surface of the nanoalloys was capped by either oleic acid (OA) or n-tri-octylphosphonic acid (TOPO) in situ. The mean diameter of the alloyed particles is around 12 nm in both systems. The chemical nature of the nanoalloy surface was found to influence the dispersion of the particles over polymer volume. The size of the nanoalloy domains in PS is 50 nm, on average, consisting of approximately 0.7 wt% nanoalloys. However, the size of the nanoalloy domains is smaller when they are loaded into PS-SIS. The structure formation is predominantly determined by enthalpic compatibilization. Atomic force microscopy results suggest that the nanoalloys capped with TOPO sequester into PS-rich domains and enlarge the domain. On the other hand, the ones capped with OA prefer to locate in polyisoprene domains. The increase of particles over 1.0 wt% distorts the lamella structure.Article Citation - WoS: 47Effect of Filler Amount on Thermoelastic Properties of Poly (dimethylsiloxane) Networks(Elsevier Ltd., 2005) Demir, Mustafa Muammer; Menceloğlu, Yusuf Z.; Erman, BurakEnd-linked poly(dimethylsiloxane) (PDMS) networks were prepared in the presence of fumed silica particles with hydroxyl groups at their surfaces. The silica particles were introduced into the polymer solution prior to end-linking. Hydroxyl ended PDMS chains were end-linked via the tetra functional crosslinker, tetraethoxysilane. The filler content varied in the range 0-5 wt%. Atomic Force Microscopy was used to image and characterize the silica particles. Swelling, stress-strain and thermoelasticity experiments were performed. The temperature coefficient and the energetic part of the force in uniaxial extension are found to increase with increasing silica amount. This observation is ascribed to effects contributed possibly by the adsorption layer around the silica particles.Article Citation - WoS: 36Citation - Scopus: 36Surfactant-Assisted Formation of Organophilic Ceo2 Nanoparticles(Elsevier Ltd., 2012) Tunusoğlu, Özge; Muñoz-Espí, Rafael; Akbey, Ümit; Demir, Mustafa MuammerWe report a simple one-pot method to prepare organically functionalized CeO 2 nanoparticles by controlled chemical precipitation. The particles were nucleated by mixing aqueous solutions of Ce(NO 3) 3·6H 2O and ammonia at room temperature. Different small organic molecules were chosen as capping agents and injected into the reaction medium at the beginning of the synthesis: 3-(mercaptopropyl) trimethoxy silane (MPS), hexadecyltrimethyl ammonium bromide (CTAB), 3-mercapto propionic acid (3-MPA), and thioglycolic acid (TGA). The resulting nanocrystals were quasi-spherical and had a narrow mean size distribution with an average size smaller than 10nm. Dynamic nuclear polarization enhanced NMR (DNP-NMR) and FTIR measurements suggested a chemical grafting of the surfactant and a homogeneous surface modification. The colloidal stabilities were characterized by dynamic light scattering and zeta potential measurements. The stabilization by aliphatic groups was tested with a frequently used hydrophobic monomer, methyl methacrylate. According to the results, CTAB is the most effective of the used stabilizing surfactant. The mechanism of formation of the organophilic CeO 2 nanoparticles is discussed.Article Citation - WoS: 109Citation - Scopus: 119Synthesis of Amidoximated Polyacrylonitrile Fibers and Its Application for Sorption of Aqueous Uranyl Ions Under Continuous Flow(Elsevier Ltd., 2012) Horzum Polat, Nesrin; Shahwan, Talal; Parlak, Onur; Demir, Mustafa MuammerThis study reports a feasible method for the removal of radioactive U(VI) ions from aqueous systems via column sorption under continuous flow. Electrospun polyacrylonitrile (PAN) fibers were used as sorbent materials in a homemade minicolumn. The nitrile groups on the fibers' surface were modified to amidoxime groups using hydroxylamine hydrochloride. Surface modification was observed to enhance the sorption capacity of PAN fibers toward uranium ions by more than 4-fold by virtue of the chelating ability of the amidoxime groups. The experiments investigated the effect of pH, initial concentration, and repetitive loading on the sorption properties of amidoximated PAN fibers. Based on the overall results, the surface-modified fibers seem to be a suitable potential sorbent material for applications in environmental cleanup, particularly for nuclear plants.Article Citation - WoS: 35Citation - Scopus: 45Types of the Scaling in Hyper Saline Geothermal System in Northwest Turkey(Elsevier Ltd., 2014) Demir, Mustafa Muammer; Baba, Alper; Atilla, Vedat; İnanlı, MustafaTuzla is an active geothermal area located in northwestern Turkey, 80km south of the city of Canakkale and 5km from the Aegean Coast. The geothermal brine from this area, which is dominated by NaCl, has a typical temperature of 173°C. Rapid withdrawal of fluid to ambient surface conditions during sampling causes precipitation of various compounds known as scaling. Scaling is one of the important problems in Tuzla geothermal system that reduces the efficiency of the geothermal power plant and causes economical loss. The aim of this study was to determine the type of scaling as a first step towards preventing its formation. The scales formed in the geothermal system were divided into two groups according to location: the ones that formed in downhole and the ones that accumulated along the surface pipeline. Both scales were examined in terms of their elemental composition, structure and morphology using XRF, XRD, and SEM, respectively. The former was found to be mainly composed of PbS (Galena) and CaCO3 (aragonite or calcite). In contrast, the latter was heterogeneous in nature and consisted of mainly saponite like amorphous structure along with submicrometer-sized amorphous silica particles, layered double magnesium and iron hydroxide, and NaCl.Article Citation - WoS: 69Citation - Scopus: 82Development and Characterization of Tubular Composite Ceramic Membranes Using Natural Alumino-Silicates for Microfiltration Applications(Elsevier Ltd., 2015) Ghouil, Boudjemaa; Harabi, Abdelhamid; Bouzerara, Ferhat; Boudaira, Boukhemis; Guechi, Abdelkrim; Demir, Mustafa Muammer; Figoli, AlbertoAbstract The preparation and characterization of porous tubular ceramic composite microfiltration membranes, using kaolins and calcium carbonates, were reported. The porous gehlenite (2CaO·Al2O3·SiO2) and anorthite (CaO·Al2O3·2SiO2) based ceramics were obtained by a solid state reaction. A ceramic support, sintered at 1250 C, within an average pore size of about 8 μm, a porosity of about 47% and a compression strength around 40 MPa, was prepared. The microfiltration active top layer was added on the support by a slip casting from clay powder suspensions. The novel microfiltration membrane layer has a thickness of 40 μm and an APS value of about 0.2 μm. This average pore size value was improved and considerably lower than those reported in the literature (0.5 μm). The performance of the novel microfiltration ceramic membrane was determined for evaluating both the water permeability and rejection. This proved the potentiality of the membrane produced in the microfiltration field. Moreover, the good adhesion, between the support and the active microfiltration layer membranes, was also proved. A correlation between microstructures of used powders and physicochemical properties was discussed. Finally, the origin of the unique two powder order membrane depositions was also proposed.Article Citation - WoS: 74Humidity Sensing Properties of Zno-Based Fibers by Electrospinning(Elsevier Ltd., 2011) Horzum Polat, Nesrin; Taşçıoğlu, Didem; Okur, Salih; Demir, Mustafa MuammerZinc oxide (ZnO) based fibers with a diameter of 80-100 nm were prepared by electrospinning. Polyvinyl alcohol (PVA) and zinc acetate dihydrate were dissolved in water and the polymer/salt solution was electrospun at 2.5 kV cm-1. The resulting electrospun fibers were subjected to calcination at 500 °C for 2 h to obtain ZnO-based fibers. Humidity sensing properties of the fiber mats were investigated by quartz crystal microbalance (QCM) method and electrical measurements. The adsorption kinetics under constant relative humidity (RH) between 10% and 90% were explained using Langmuir adsorption model. Results of the measurements showed that ZnO-based fibers were found to be promising candidate for humidity sensing applications at room temperature.