Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
4 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 4Lipid Bilayer on Wrinkled-Interfaced Graphene Field Effect Transistor(Elsevier Ltd., 2021) Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Çelebi, Cem; Çelebi, Cem; Yıldız, Ümit Hakan; 04.05. Department of Pyhsics; 04.01. Department of Chemistry; 04. Faculty of Science; 01. Izmir Institute of TechnologyThis study describes lipid bilayer-based sensor interface on SiO2 encapsulated graphene field effect transistors (GFET). The SiO2 layer was utilized as a lipid compatible surface that drives bilayer formation. The two types of surface morphologies i) wrinkled morphology by thermal evaporation (TE) and ii) flat morphology by pulsed electron deposition (PED) were obtained. The sensing performance of wrinkled and flat interfaced-GFETs were investigated, pH sensitivity of wrinkled interfaced-GFETs were found to be ten fold larger than the flat ones. The enhanced sensitivity is attributed to thinning of the oxide layer by formation of wrinkles thereby facilitating electrostatic gating on graphene. We foresee that described wrinkled SiO2 interfaced-GFET holds promise as a cell membrane mimicking sensing platform for novel bioelectronic applications. © 2020Article Citation - WoS: 12Citation - Scopus: 12Modification of Metal/Semiconductor Junctions by Self-Assembled Monolayer Organic Films(Elsevier Ltd., 2009) Yakuphanoğlu, Fahrettin; Okur, Salih; Okur, Salih; Özgener, Hüseyin; 04.05. Department of Pyhsics; 04.01. Department of Chemistry; 04. Faculty of Science; 01. Izmir Institute of TechnologyTwo new metal/molecule/semiconductor contacts, Au/n-Si/TDA/Au and Au/p-Si/ODM/Au, were fabricated to understand effect of organic compounds, tridecylamine and octadecylmercaptan self-assembled monolayer (SAM) films, on electrical charge transport properties of the metal/semiconductor junctions. The morphology of the organic monolayers deposited on Si substrates was investigated by atomic force microscopy. The molecular coverage of ODM deposited on p-Si is poorer than that of TDA on n-Si substrate. The ideality factors of the p-Si/ODM and n-Si/TDA diodes were found to be 1.66 and 1.48, respectively. The electrical results show that the tridecylamine monolayer passivated junction has a lower ideality factor. The ideality factor indicates clear dependence on two different type functional groups R-SH (Thiol) and R-NH2 (Amin) groups and it increases with different functional groups of organic molecule. The barrier height φb value of the n-Si/TDA diode is smaller than that of p-Si/ODM diode, as a result of chain length of the SAM organic molecules. The interface state density Dit values of the diodes were determined using conductance technique. The n-Si/TDA diode has the smaller interface state density according to p-Si/ODM diode. We have evaluated that the organic molecules control the electronic parameters of metal/semiconductor diodes and thus, organic modification helps to get one step closer towards to new organic assisted silicon based microelectronic devices.Article Citation - WoS: 82Citation - Scopus: 92Metal Ion Release From Nitrogen Ion Implanted Cocrmo Orthopedic Implant Material(Elsevier Ltd., 2006) Öztürk, Orhan; Türkan, Uğur; Eroğlu, Ahmet Emin; Öztürk, Orhan; 04.01. Department of Chemistry; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyCoCrMo alloys are used as orthopedic implant materials because of their excellent mechanical and corrosion properties. However, when placed in vivo, these alloys release Co, Cr, Mo ions to host tissues, which may give rise to significant health concerns over time. Nitrogen ion implantation can be used to form protective layers on the surface of CoCrMo orthopedic alloys by modifying the near surface layers of these materials. In this study, medical grade CoCrMo alloy (IS0 5832-12) was ion implanted with 60 keV nitrogen ions to a high dose of 1.9 × 10 18 ions/cm 2 at substrate temperatures of 100, 200 and 400 °C. The N implanted layer microstructures, implanted layer phases, and thicknesses were studied by a combination of Bragg-Brentano (θ/2θ) and grazing incidence (Seeman-Bohlin) X-ray diffraction (XRD and GIXRD) and cross-sectional scanning electron microscopy (SEM). Atomic force microscopy (AFM) was used for roughness analysis of N implanted as well as as-polished surfaces. Static immersion tests were performed to investigate metal ion release into simulated body fluid (SBF) by electrothermal atomic absorption spectrometry (ETAAS) and inductively coupled plasma optical emission spectrometry (ICP-OES). XRD and SEM analyses indicated that the N implanted layers were ∼ 150-450 nm thick and composed of the (Co,Cr,Mo) 2+xN nitride phase and a high N concentration Co-based FCC phase, γ N depending on the substrate temperature. ETAAS analysis results showed that in vitro exposure of the N implanted surfaces resulted in higher levels of cobalt ion release into the simulated body fluid compared to the untreated, polished alloy. The higher Co release from the N implanted specimens is attributed to the nature of the implanted layer phases as well as to the rougher surfaces associated with the N implanted specimens compared to the relatively smooth surface of the untreated material. SEM analysis of N implanted and untreated specimens after immersion tests clearly indicated calcium phosphate formation on the as-polished CoCrMo alloy, indicating a degree of bioactivity of the untreated metal surface which is absent in the N implanted specimens.Article Citation - WoS: 74Humidity Sensing Properties of Zno-Based Fibers by Electrospinning(Elsevier Ltd., 2011) Horzum Polat, Nesrin; Taşçıoğlu, Didem; Okur, Salih; Demir, Mustafa Muammer; Demir, Mustafa Muammer; 04.05. Department of Pyhsics; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyZinc oxide (ZnO) based fibers with a diameter of 80-100 nm were prepared by electrospinning. Polyvinyl alcohol (PVA) and zinc acetate dihydrate were dissolved in water and the polymer/salt solution was electrospun at 2.5 kV cm-1. The resulting electrospun fibers were subjected to calcination at 500 °C for 2 h to obtain ZnO-based fibers. Humidity sensing properties of the fiber mats were investigated by quartz crystal microbalance (QCM) method and electrical measurements. The adsorption kinetics under constant relative humidity (RH) between 10% and 90% were explained using Langmuir adsorption model. Results of the measurements showed that ZnO-based fibers were found to be promising candidate for humidity sensing applications at room temperature.