Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
20 results
Search Results
Review Citation - WoS: 17Citation - Scopus: 16Engineering Periodontal Tissue Interfaces Using Multiphasic Scaffolds and Membranes for Guided Bone and Tissue Regeneration(Elsevier, 2024) Özkendir, Özge; Karaca, İlayda; Çullu, Selin; Yaşar, Hüsniye Nur,; Erdoğan, Oğulcan; Dikici, Serkan; Dikici, Betul AldemirPeriodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.Article Citation - WoS: 1Citation - Scopus: 1The Soft Nanodots as Fluorescent Probes for Cell Imaging: Analysis of Cell and Spheroid Penetration Behavior of Single Chain Polymer Dots(Wiley, 2024) Yücel, Müge; Onbaş, Rabia; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes the formation, size control, and penetration behavior of polymer nanodots (Pdots) consisting of single or few chain polythiophene-based conjugated polyelectrolytes (CPEs) via nanophase separation between good solvent and poor solvent of CPE. Though the chain singularity may be associated with dilution nanophase separation suggests that molecules of a good solvent create a thermodynamically driven solvation layer surrounding the CPEs and thereby separating the single chains even in their poor solvents. This statement is therefore corroborated with emission intensity/lifetime, particle size, and scattering intensity of polyelectrolyte in good and poor solvents. Regarding the augmented features, Pdots are implemented into cell imaging studies to understand the nuclear penetration and to differentiate the invasive characteristics of breast cancer cells. The python based red, green, blue (RGB) color analysis depicts that Pdots have more nuclear penetration ability in triple negative breast cancer cells due to the different nuclear morphology in shape and composition and Pdots have penetrated cell membrane as well as extracellular matrix in spheroid models. The current Pdot protocol and its utilization in cancer cell imaging are holding great promise for gene/drug delivery to target cancer cells by explicitly achieving the very first priority of nuclear intake. The penetration capability of cationic soft nanodots in to tumor models of breast cancer is demonstrated. The image analysis based on fluorescence intensity variation reveals the characteristics of translocation of nanodots in dense mediums such as tumor models.imageArticle Citation - WoS: 3Citation - Scopus: 4Biopatterning of 3d Cellular Model by Contactless Magnetic Manipulation for Cardiotoxicity Screening(Mary Ann Liebert, Inc, 2023) Önbaş, Rabia; Arslan Yıldız, AhuPatterning cells to create three-dimensional (3D) cell culture models by magnetic manipulation is a promising technique, which is rapid, simple, and cost-effective. This study introduces a new biopatterning approach based on magnetic manipulation of cells with a bioink that consists alginate, cells, and magnetic nanoparticles. Plackett-Burman and Box-Behnken experimental design models were used to optimize bioink formulation where NIH-3T3 cells were utilized as a model cell line. The patterning capability was confirmed by light microscopy through 7 days culture time. Then, biopatterned 3D cardiac structures were formed using H9c2 cardiomyocyte cells. Cellular and extracellular components, F-actin and collagen Type I, and cardiac-specific biomarkers, Troponin T and MYH6, of biopatterned 3D cardiac structures were observed successfully. Moreover, Doxorubicin (DOX)-induced cardiotoxicity was investigated for developed 3D model, and IC50 value was calculated as 8.1 μM for biopatterned 3D cardiac structures, which showed higher resistance against DOX-exposure compared to conventional two-dimensional cell culture. Hereby, developed biopatterning methodology proved to be a simple and rapid approach to fabricate 3D cardiac models, especially for drug screening applications. Copyright 2023, Mary Ann Liebert, Inc., publishers.Article Citation - WoS: 6Citation - Scopus: 6Microbial Desalination Cell Treated Spent Geothermal Brine as a Nutrient Medium in Hydroponic Lettuce Cultivation: Health Risk Assessment(Elsevier, 2024) Goren, A. Y.; Eskisoy, D. N.; Genisoglu, S.; Okten, H. E.The scarcity and contamination of freshwater resources are extremely critical issues today, and the expansion of water reuse has been considered as an option to decrease its impact. Therefore, the reuse of microbial desalination (MDC)-treated spent geothermal brine for agricultural purposes arises as a good solution to prevent water contamination and provide sustainable water usage. In this study, the potential of treated spent geothermal water from MDC system as a nutrient solution for the hydroponic cultivation of lettuce was evaluated. The effects of different water samples (Hoagland solution (R1) as a control, MDC-treated water (R2), 1:1, v/v mixture of MDCtreated water and Hoagland solution (R3), 4:1, v/v mixture of MDC-treated water and Hoagland solution (R4), and tap water (R5)) on lettuce growth were considered. The application of R3 and R4 samples for hydroponic lettuce cultivation was promising since the lettuce plants uptake sufficient nutrients for their growth and productivity with low toxic metal concentrations. In addition, the chlorophyll-a, chlorophyll-b, and carotene contents of lettuce were in the range of 1.045-2.391 mg/g, 0.761-1.986 mg/g, and 0.296-0.423 mg/g in different water samples, respectively. The content of chlorophyll-a was highest in R1 (2.391 mg/g), followed by R3 (2.371 mg/g). Furthermore, the health risk assessment of heavy metal accumulations in the lettuce plants cultivated in the various water samples was determined. Results showed that heavy metal exposure via lettuce consumption is unlikely to suffer noticeable adverse health problems with values below the permissible limit value.Article Citation - WoS: 8Citation - Scopus: 9Development of Plant-Based Biopolymer Coatings for 3d Cell Culture: Boron-Silica Quince Seed Mucilage Nanocomposites(Royal Society of Chemistry, 2023) Yılmaz, Hilal Deniz; Cengiz, Uğur; Derkuş, Burak; Arslan, Yavuz EmreSpheroid formation with spontaneous aggregation has captured interest in most cell culture studies due to its easy set-up and more reliable results. However, the economic and technical costs of the advanced systems and commercial ultra-low adhesive platforms have pushed researchers into pursuing alternatives. Nowadays, polymeric coatings, including poly-hydroxyethyl methacrylate and agar/agarose, are the commonly used polymers for non-adhesive plate fabrication, yet the costs and working solvent or heat-dependent preparation procedures maintain the need for the development of novel biomaterials. Here, we propose a greener and more economical approach for producing non-adherent surfaces and spheroid formation. For this, a plant waste-based biopolymer from quince fruit (Cydonia oblonga Miller, from Rosaceae family) seeds and boron-silica precursors were introduced. The unique water-holding capacity of quince seed mucilage (Q) was enriched with silanol and borate groups to form bioactive and hydrophilic nanocomposite overlays for spheroid studies. Moreover, 3D gel plates from the nanocomposite material were fabricated and tested in vitro as a proof-of-concept. The surface properties of coatings and the biochemical and mechanical properties of the nanocomposite materials were evaluated in-depth with techniques, and extra hydrophilic coatings were obtained. Three different cell lines were cultured on these nanocomposite surfaces, and spheroid formation with increased cellular viability was recorded on day 3 with a >200 & mu;m spheroid size. Overall, Q-based nanocomposites are believed to be a fantastic alternative for non-adherent surface fabrication due to their low-cost, easy operation, and intrinsic hydration layer forming capacity with biocompatible nature in vitro.Article Citation - WoS: 19Citation - Scopus: 21Telomerase Activators From 20(27)-Octanor Via Biotransformation by the Fungal Endophytes(Academic Press, 2021) Duman, Seda; Ekiz, Güner; Yılmaz, Sinem; Yusufoğlu, Hasan; Ballar Kırmızıbayrak, Petek; Bedir, ErdalCycloastragenol [20(R),24(S)-epoxy-3 beta,6 alpha,16 beta,25-tetrahydroxycycloartane] (CA), the principle sapogenol of many cycloartane-type glycosides found in Astragalus genus, is currently the only natural product in the anti-aging market as telomerase activator. Here, we report biotransformation of 20(27)-octanor-cycloastragenol (1), a thermal degradation product of CA, using Astragalus species originated endophytic fungi, viz. Penicillium roseopurpureum, Alternaria eureka, Neosartorya hiratsukae and Camarosporium laburnicola. Fifteen new biotransformation products (2-16) were isolated, and their structures were established by NMR and HRESIMS. Endophytic fungi were found to be capable of performing hydroxylation, oxidation, ring cleavage-methyl migration, dehydrogenation and Baeyer-Villiger type oxidation reactions on the starting compound (1), which would be difficult to achieve by conventional synthetic methods. In addition, the ability of the metabolites to increase telomerase activation in Hekn cells was evaluated, which showed from 1.08 to 12.4-fold activation compared to the control cells treated with DMSO. Among the compounds tested, 10, 11 and 12 were found to be the most potent in terms of telomerase activation with 12.40-, 7.89- and 5.43-fold increase, respectively (at 0.1, 2 and 10 nM concentrations, respectively).Article Citation - WoS: 6Citation - Scopus: 6Functional Characterization of a Novel Cyp119 Variant To Explore Its Biocatalytic Potential(Wiley, 2021) Sakallı, Tuğçe; Sürmeli, Nur BaşakBiocatalysts are increasingly applied in the pharmaceutical and chemical industry. Cytochrome P450 enzymes (P450s) are valuable biocatalysts due to their ability to hydroxylate unactivated carbon atoms using molecular oxygen. P450s catalyze reactions using nicotinamide adenine dinucleotide phosphate (NAD(P)H) cofactor and electron transfer proteins. Alternatively, P450s can utilize hydrogen peroxide (H2O2) as an oxidant, but this pathway is inefficient. P450s that show higher efficiency with peroxides are sought after in industrial applications. P450s from thermophilic organisms have more potential applications as they are stable toward high temperature, high and low pH, and organic solvents. CYP119 is an acidothermophilic P450 from Sulfolobus acidocaldarius. In our previous study, a novel T213R/T214I (double mutant [DM]) variant of CYP119 was obtained by screening a mutant library for higher peroxidation activity utilizing H2O2. Here, we characterized the substrate scope; stability toward peroxides; and temperature and organic solvent tolerance of DM CYP119 to identify its potential as an industrial biocatalyst. DM CYP119 displayed higher stability than wild-type (WT) CYP119 toward organic peroxides. It shows higher peroxidation activity for non-natural substrates and higher affinity for progesterone and other bioactive potential substrates compared to WT CYP119. DM CYP119 emerges as a new biocatalyst with a wide range of potential applications in the pharmaceutical and chemical industry.Article Citation - WoS: 22Citation - Scopus: 26Magnetic Levitation Assisted Biofabrication, Culture, and Manipulation of 3d Cellular Structures Using a Ring Magnet Based Setup(Wiley, 2021) Anıl İnevi, Müge; Delikoyun, Kerem; Meşe Özçivici, Gülistan; Tekin, Hüseyin Cumhur; Özçivici, EnginDiamagnetic levitation is an emerging technology for remote manipulation of cells in cell and tissue level applications. Low-cost magnetic levitation configurations using permanent magnets are commonly composed of a culture chamber physically sandwiched between two block magnets that limit working volume and applicability. This work describes a single ring magnet-based magnetic levitation system to eliminate physical limitations for biofabrication. Developed configuration utilizes sample culture volume for construct size manipulation and long-term maintenance. Furthermore, our configuration enables convenient transfer of liquid or solid phases during the levitation. Before biofabrication, we first calibrated/ the platform for levitation with polymeric beads, considering the single cell density range of viable cells. By taking advantage of magnetic focusing and cellular self-assembly, millimeter-sized 3D structures were formed and maintained in the system allowing easy and on-site intervention in cell culture with an open operational space. We demonstrated that the levitation protocol could be adapted for levitation of various cell types (i.e., stem cell, adipocyte and cancer cell) representing cells of different densities by modifying the paramagnetic ion concentration that could be also reduced by manipulating the density of the medium. This technique allowed the manipulation and merging of separately formed 3D biological units, as well as the hybrid biofabrication with biopolymers. In conclusion, we believe that this platform will serve as an important tool in broad fields such as bottom-up tissue engineering, drug discovery and developmental biology.Article Citation - WoS: 2Citation - Scopus: 2Cloning, Expression, and Characterization of a Novel Sericin-Like Protein(Wiley, 2022) Bostan, Fatmanur; Sürmeli, Nur BaşakSilk consists of two proteins called fibroin and sericin. While fibroin is used in the textile industry and has various biomaterial applications, sericin has been considered as waste material until recently. Sericin is a multicomponent protein and it has important properties such as biocompatibility, biodegradability, cryoprotectivity, and antioxidant. Sericin from silkworm cocoons can be obtained by chemical, enzymatic, and heat treatment methods. However, sericin obtained with these treatment methods is not of consistent and high quality. Moreover, the exposure of sericin to harsh conditions during extraction leads to inconsistencies in the composition and structure of the sericin obtained. The inconsistencies in sericin structure and composition decrease application of sericin as a biomaterial. Here, we produce a sericin-like protein (Ser4mer) with native sequence of sericin encoding four repeats of the conserved 38 amino acid motif recombinantly in Escherichia coli and characterize its structural properties. Ser4mer protein shows similar structure to native sericin and higher solubility than previously obtained recombinant sericin-like proteins. Recombinant production of a soluble sericin-like protein will significantly expand its applications as a biomaterial. In addition, recombinant production of silk proteins will allow us to understand sequence-structure relationships in these proteins.Article Citation - WoS: 8Citation - Scopus: 8The Role of Connexins in Breast Cancer: From Misregulated Cell Communication To Aberrant Intracellular Signaling(Taylor & Francis, 2022) Ünal, Yağmur Ceren; Yavuz, Büşra; Özçivici, Engin; Meşe Özçivici, GülistanIn spite of clinical advancements and improved diagnostic techniques, breast cancers are the leading cause of cancer-associated deaths in women worldwide. Although 70% of early breast cancers can be cured, there are no efficient therapies against metastatic breast cancers. Several factors including connexins and gap junctions play roles in breast tumorigenesis. Connexins are critical for cellular processes as a linkage between connexin mutations and hereditary disorders demonstrated their importance for tissue homeostasis. Further, alterations in their expression, localization and channel activities were observed in many cancers including breast cancer. Both channel-dependent and independent functions of connexins were reported in initiation and progression of cancers. Unlike initial reports suggesting tumor suppressor functions, connexins and gap junctions have stage, context and isoform dependent effects in breast cancers similar to other cancers. In this review, we tried to describe the current understanding of connexins in tumorigenesis specifically in breast cancers.