Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
6 results
Search Results
Article Citation - WoS: 14Citation - Scopus: 16Synergistic Effect of Type and Concentration of Surfactant and Diluting Solvent on the Morphology of Emulsion Templated Matrices Developed as Tissue Engineering Scaffolds(Elsevier, 2022) Claeyssens, Frederik; Aldemir Dikici, Betül; Dikici, SerkanEmulsion templating is an advantageous route for the fabrication of tissue engineering scaffolds. Emulsions are mostly stabilised using surfactants, and the performances of the surfactants depend on various parameters such as emulsification temperature and the presence of the electrolytes. In this study, we suggest that diluting solvent type also has a dramatic impact on the efficiency of the surfactant and morphology of the polymerised emulsions. For this, morphologies of polycaprolactone methacrylate-based polymerised emulsions, which are designed for tissue engineering applications and in vitro biocompatibilities, were shown by our group, prepared using four different surfactants, and three different solvents were investigated. Results showed that the diluting solvent used in the emulsion composition has a strong impact on the performance of the surfactant and consequently on the morphology of polymerised emulsions. Increasing surfactant concentration and diluting solvent volume have an opposite impact on the characteristics of emulsions. Scaffolds with average pore sizes changing from 10 to 78 μm could be fabricated. Establishing these relations enables us to have control over the overall morphology of polymerised emulsions and precisely engineer them for specific tissue engineering applications by tuning solvent and surfactant type and concentration.Article Citation - WoS: 14Citation - Scopus: 14Development of Biological Meniscus Scaffold: Decellularization Method and Recellularization With Meniscal Cell Population Derived From Mesenchymal Stem Cells(SAGE Publications, 2021) Kara, Aylin; Koçtürk, Semra; Bilici, Gökçen; Havıtçıoğlu, HasanTissue engineering approaches which include a combination of cells and scaffold materials provide an alternative treatment for meniscus regeneration. Decellularization and recellularization techniques are potential treatment options for transplantation. Maintenance of the ultrastructure composition of the extracellular matrix and repopulation with cells are important factors in constructing a biological scaffold and eliminating immunological reactions. The aim of the study is to develop a method to obtain biological functional meniscus scaffolds for meniscus regeneration. For this purpose, meniscus tissue was decellularized by our modified method, a combination of physical, chemical, and enzymatic methods and then recellularized with a meniscal cell population composed of fibroblasts, chondrocytes and fibrochondrocytes that obtained from mesenchymal stem cells. Decellularized and recellularized meniscus scaffolds were analysed biochemically, biomechanically and histologically. Our results revealed that cellular components of the meniscus were successfully removed by preserving collagen and GAG structures without any significant loss in biomechanical properties. Recellularization results showed that the meniscal cells were localized in the empty lacuna on the decellularized meniscus, and also well distributed and proliferated consistently during the cell culture period (p < 0.05). Furthermore, a high amount of DNA, collagen, and GAG contents (p < 0.05) were obtained with the meniscal cell population in recellularized meniscus tissue. The study demonstrates that our decellularization and recellularization methods were effective to develop a biological functional meniscus scaffold and can mimic the meniscus tissue with structural and biochemical features. We predict that the obtained biological meniscus scaffolds may provide avoidance of adverse immune reactions and an appropriate microenvironment for allogeneic or xenogeneic recipients in the transplantation process. Therefore, as a promising candidate, the obtained biological meniscus scaffolds might be verified with a transplantation experiment.Article Citation - WoS: 43Citation - Scopus: 46Glucuronoxylan-Based Quince Seed Hydrogel: a Promising Scaffold for Tissue Engineering Applications(Elsevier, 2021) Güzelgülgen, Meltem; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuNatural gums and mucilages from plant-derived polysaccharides are potential candidates for a tissue-engineering scaffold by their ability of gelation and biocompatibility. Herein, we utilized Glucuron-oxylanbased quince seed hydrogel (QSH) as a scaffold for tissue engineering applications. Optimization of QSH gelation was conducted by varying QSH and crosslinker glutaraldehyde (GTA) concentrations. Structural characterization of QSH was done by Fourier Transform Infrared Spectroscopy (MR). Furthermore, morphological and mechanical investigation of QSH was performed by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The protein adsorption test revealed the suitability of QSH for cell attachment. Biocompatibility of QSH was confirmed by culturing NIH-3T3 mouse fibroblast cells on it. Cell viability and proliferation results revealed that optimum parameters for cell viability were 2 mg mi(-1)of QSH and 0.03 M GTA. SEM and DAPI staining results indicated the formation of spheroids with a diameter of approximately 300 pm. Furthermore, formation of extracellular matrix (ECM) microenvironment was confirmed with the Collagen Type-I staining. Here, it was demonstrated that the fabricated QSH is a promising scaffold for 3D cell culture and tissue engineering applications provided by its highly porous structure, remarkable swelling capacity and high biocompatibility. (C) 2021 Published by Elsevier B.V.Article Citation - WoS: 79Citation - Scopus: 93Magnetic Force-Based Micro Fluidic Techniques for Cellular and Tissue Bioengineering(Frontiers Media S.A., 2018) Yaman, Sena; Anıl İnevi, Müge; Özçivici, Engin; Tekin, Hüseyin CumhurLive cell manipulation is an important biotechnological tool for cellular and tissue level bioengineering applications due to its capacity for guiding cells for separation, isolation, concentration, and patterning. Magnetic force-based cell manipulation methods offer several advantages, such as low adverse effects on cell viability and low interference with the cellular environment. Furthermore, magnetic-based operations can be readily combined with microfluidic principles by precisely allowing control over the spatiotemporal distribution of physical and chemical factors for cell manipulation. In this review, we present recent applications of magnetic force-based cell manipulation in cellular and tissue bioengineering with an emphasis on applications with microfluidic components. Following an introduction of the theoretical background of magnetic manipulation, components of magnetic force-based cell manipulation systems are described. Thereafter, different applications, including separation of certain cell fractions, enrichment of rare cells, and guidance of cells into specific macro- or micro-arrangements to mimic natural cell organization and function, are explained. Finally, we discuss the current challenges and limitations of magnetic cell manipulation technologies in microfluidic devices with an outlook on future developments in the field.Article Citation - WoS: 46Citation - Scopus: 57Recent Advances in Magnetic Levitation: a Biological Approach From Diagnostics To Tissue Engineering(American Chemical Society, 2018) Türker, Esra; Arslan Yıldız, AhuThe magnetic levitation technique has been utilized to orientate and manipulate objects both in two dimensions (2D) and three dimensions (3D) to form complex structures by combining various types of materials. Magnetic manipulation holds great promise for several applications such as self-assembly of soft substances and biological building blocks, manipulated tissue engineering, as well as cell or biological molecule sorting for diagnostic purposes. Recent studies are proving the potential of magnetic levitation as an emerging tool in biotechnology. This review outlines the advances of newly developing magnetic levitation technology on biological applications in aqueous environment from the biotechnology perspective.Conference Object Üç Boyutlu Hücre Kültürü için Polimer Esaslı Ekstrasellüler Matriks Mimetiği(Institute of Electrical and Electronics Engineers Inc., 2017) Türker, Esra; Yıldız, Ümit Hakan; Arslan Yıldız, AhuElektro-eğirme metodu gelişmiş üretim teknolojilerindendir ve biyomedikal uygulamalarında yaygın olarak kullanılmaktadır. Özellikle doku mühendisliğinde amaç, çalışılacak doku üzerine doğal veya sentetik destek materyali (iskele) üreterek hücrenin uyum sağlayabileceği bir ortam oluşturmaktır. Bu projenin amacı üç boyutlu (3D) hücre kültürü çalışmaları için elektro-eğirme-metodu ile poli(L-laktik-co-epsilon-kaprolakton) (PLLCL) kullanılarak iskele üretilmesidir. Homojen lifler ve uygun gözenek boyutu elde etmek amacıyla optimizasyon çalışmaları yapılmıştır. Elde edilen liflerin çapı, akış hızı ve voltajın artmasıyla azalmaktadır. Taramalı uç elektron mikroskop incelemeleri (SEM) lif morfolojik yapılarının doku iskelesi fabrikasyonu için ideale yakın olduğunu ortaya çıkarmıştır.