Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
42 results
Search Results
Article Citation - WoS: 18Citation - Scopus: 17Modifying Pickering Polymerized High Internal Phase Emulsion Morphology by Adjusting Particle Hydrophilicity(Elsevier, 2024) Durgut, Enes; Zhou, Muchu; Dikici, Betuel Aldemir; Foudazi, Reza; Claeyssens, FrederikThis study investigates the use of submicron polymeric particles with varying crosslinking densities as the sole stabilizer for producing Polymerized High Internal Phase Emulsions (PolyHIPE). We establish a direct correlation between the crosslinking density and the hydrophilicity of the polymer particles. The hydrophilicity of these particles significantly influences the morphology and rheology of HIPEs. These differences manifest as various morphological variations in the resulting PolyHIPE templates. It was discovered that by increasing the crosslinker weight percentage in the particles from 0 % to 100 %, PolyHIPEs with semi-open, open, and closed porous structures can be obtained. Furthermore, non-crosslinked particles were observed to dissolve in the continuous phase, acting as macromolecular surfactants that generate small pores akin to surfactant-stabilized structures in PolyHIPE. These findings offer fresh insights into the relationship between particle localization at the interface, HIPE rheology, and the formation of pore throats in Pickering PolyHIPEs, leading to the creation of either closed or open porous networks. Additionally, interfacial rheological results demonstrate that particles synthesized with varying monomer-to-crosslinker ratios exhibit different interfacial elasticities, which are linked to PolyHIPE morphology.Review Citation - WoS: 30Citation - Scopus: 33Molecular Separation by Using Active and Passive Microfluidic Chip Designs: a Comprehensive Review(Wiley, 2023) Ebrahimi, Aliakbar; Didarian, Reza; Shih, Chih-Hsin; Nasseri, Behzad; Ethan Li, Yi-Chen; Shih, Steven; İçöz, Kutay; Tarım, Ergün Alperay; Akpek, Ali; Çeçen, Berivan; Bal Öztürk, Ayça; Güleç, Kadri; Tarım, Burcu Sırma; Tekin, Hüseyin CumhurSeparation and identification of molecules and biomolecules such as nucleic acids, proteins, and polysaccharides from complex fluids are known to be important due to unmet needs in various applications. Generally, many different separation techniques, including chromatography, electrophoresis, and magnetophoresis, have been developed to identify the target molecules precisely. However, these techniques are expensive and time consuming. “Lab-on-a-chip” systems with low cost per device, quick analysis capabilities, and minimal sample consumption seem to be ideal candidates for separating particles, cells, blood samples, and molecules. From this perspective, different microfluidic-based techniques have been extensively developed in the past two decades to separate samples with different origins. In this review, “lab-on-a-chip” methods by passive, active, and hybrid approaches for the separation of biomolecules developed in the past decade are comprehensively discussed. Due to the wide variety in the field, it will be impossible to cover every facet of the subject. Therefore, this review paper covers passive and active methods generally used for biomolecule separation. Then, an investigation of the combined sophisticated methods is highlighted. The spotlight also will be shined on the elegance of separation successes in recent years, and the remainder of the article explores how these permit the development of novel techniques. © 2023 The Authors. Advanced Materials Interfaces published by Wiley-VCH GmbH.Article Citation - WoS: 17Citation - Scopus: 15Antiproliferative and Apoptotic Effects of Olive Leaf Extract Microcapsules on Mcf-7 and A549 Cancer Cells(American Chemical Society, 2023) Bal, Yıldız; Sürmeli, Yusuf; Şanlı Mohamed, GülşahAlginate microcapsules are a talented means for the delivery of broad curative biomacromolecules. In this study, we immobilized olive leaf extract (OLE) by calcium alginate (CA) and chitosan-coated CA (CCA) and characterized the OLE-loaded CA and CCA. The cytotoxic effect, the cell cycle arrest, and the apoptotic effect of OLE and its microcapsules were investigated against breast adenocarcinoma (MCF-7) and lung carcinoma (A549). As a result, the loading capacity of OLE-CA and OLE-CCA was found to be 80 and 99%, respectively, in optimal conditions. Also, OLE-CA and OLE-CCA were characterized by unique FTIR peaks and morphological display relative to the empty CCA microcapsules. The cytotoxicity analysis showed that the IC50 values of OLE-CA and OLE-CCA were determined to be 312 and 0.94 μg mL-1 against A549, respectively, whereas these were found to be 865.4 and 425.5 μg mL-1 for MCF-7 cells. On the other hand, the OLE microcapsules did not possess in any concentration of cytotoxic influence on the BEAS 2B healthy cell line. Also, the exposure of OLE-CCA to MCF-7 and A549 resulted in the arrest of more MCF-7 and A549 cells at the G0/G1 phase compared to the OLE. A549 and MCF-7 cells were predominantly found in the late apoptosis phase and necrosis phase, respectively. Optical microscopy images confirmed that OLE microcapsules were more effective against MCF-7 and A549 than free OLE. The present work suggested that the OLE microcapsules might be administered as nutrition supplements for cancer therapy. © 2023 The Authors. Published by American Chemical Society.Article Citation - WoS: 2Citation - Scopus: 6Immobilization of Olive Leaf Extract With Chitosan Nanoparticles as an Adjunct To Enhance Cytotoxicity(American Chemical Society, 2023) Özdamar, Burcu; Sürmeli, Yusuf; Şanlı Mohamed, GülşahWe immobilized the olive leaf extract (OLE) with chitosannanoparticles(CNPs) by optimizing the effect of various immobilization conditions,and OLE-loaded CNPs (OLE-CNPs) were then elaborately characterizedphysicochemically by scanning electron microscopy (SEM), Fourier transforminfrared (FT-IR) spectroscopy, dynamic light scattering (DLS), andatomic force microscopy (AFM). Under optimal conditions, CNPs wereable to accommodate the OLE with a loading capacity of 97.5%. Theresulting OLE-CNPs had a spherical morphology, and their average diameterwas approximately 100 nm. The cytotoxic influence, cell cycle distribution,and apoptosis stage of OLE and OLE-CNPs were analyzed on lung carcinoma(A549) and breast adenocarcinoma (MCF-7) cell lines. In an in vitrocytotoxic assay, IC50 values of OLE-CNPs were determinedto be 540 & mu;g/mL for A549 and 810 & mu;g/mL for MCF-7. Thetreatment of both A549 and MCF-7 with OLE-CNPs caused the highestcell arrest in G0/G1 in a dose-independent manner. OLE-CNPs affectedcell cycle distribution in a manner different from free OLE treatmentin both cancer cells. A549 and MCF-7 cells were predominantly foundin the late apoptosis and necrosis phases, respectively, upon treatmentof 1000 & mu;M OLE-CNPs. Our results suggest that CNPs enhance theutility of OLEs as nutraceuticals in cancer and that OLE-CNPs canbe utilized as an adjunct to cancer therapy.Article Citation - WoS: 7Citation - Scopus: 8Bioinspired Multi-Layer Biopolymer-Based Dental Implant Coating for Enhanced Osseointegration(Wiley, 2023) Üzülmez, Betül; Demirsoy, Zeynep; Can, Özge; Gülseren, GulcihanThe major drawbacks of metal-based implants are weak osseointegration and post-operational infections. These limitations restrict the long-term use of implants that may cause severe tissue damage and replacement of the implant. Recent strategies to enhance the osseointegration process require an elaborate fabrication process and suffer from post-operative complications. To address the current challenges taking inspiration from the extracellular matrix (ECM), the current study is designed to establish enhanced osseointegration with lowered risk of infection. Natural biopolymer pectin, peptide amphiphiles, and enzyme-mimicking fullerene moieties are governed to present an ECM-like environment around the implant surfaces. This multifunctional approach promotes osseointegration via inducing biomineralization and osteoblast differentiation. Application of the biopolymer-based composite to the metal surfaces significantly enhances cellular attachment, supports the mineral deposition, and upregulates osteoblast-specific gene expression. In addition to the osteoinductive properties of the constructed layers, the inherent antimicrobial properties of multilayer coating are also used to prevent infection possibility. The reported biopolymer-artificial enzyme composite demonstrates antimicrobial activity against Escherichia coli and Bacillus subtilis as a multifunctional surface coating.Review Citation - WoS: 52Citation - Scopus: 56Spheroid engineering in microfluidic devices(American Chemical Society, 2023) Tevlek, Atakan; Keçili, Seren; Özçelik, Özge Solmaz; Kulah, Haluk; Tekin, H. CumhurTwo-dimensional (2D) cell culture techniques are commonly employed to investigate biophysical and biochemical cellular responses. However, these culture methods, having monolayer cells, lack cell-cell and cell-extracellular matrix interactions, mimicking the cell microenvironment and multicellular organization. Three-dimensional (3D) cell culture methods enable equal transportation of nutrients, gas, and growth factors among cells and their microenvironment. Therefore, 3D cultures show similar cell proliferation, apoptosis, and differentiation properties to in vivo. A spheroid is defined as self-assembled 3D cell aggregates, and it closely mimics a cell microenvironment in vitro thanks to cell-cell/matrix interactions, which enables its use in several important applications in medical and clinical research. To fabricate a spheroid, conventional methods such as liquid overlay, hanging drop, and so forth are available. However, these labor-intensive methods result in low-throughput fabrication and uncontrollable spheroid sizes. On the other hand, microfluidic methods enable inexpensive and rapid fabrication of spheroids with high precision. Furthermore, fabricated spheroids can also be cultured in microfluidic devices for controllable cell perfusion, simulation of fluid shear effects, and mimicking of the microenvironment-like in vivo conditions. This review focuses on recent microfluidic spheroid fabrication techniques and also organ-on-a-chip applications of spheroids, which are used in different disease modeling and drug development studies.Conference Object Investigation of the Cytotoxicity of Bioceramic Nanoparticles on Saos-2 Cells by an Alternative Method(Elsevier Ireland Ltd, 2022) Tomak, Aysel; Önder, A. C.; Öksel Karakuş, CeydaReview Citation - WoS: 23Citation - Scopus: 24Microfluidic-Based Technologies for Diagnosis, Prevention, and Treatment of Covid-19: Recent Advances and Future Directions(Springer, 2023) Tarım, Ergün Alperay; Anıl İnevi, Müge; Özkan, İlayda; Keçili, Seren; Bilgi, Eyüp; Başlar, Muhammet Semih; Özçivici, Engin; Öksel Karakuş, Ceyda; Tekin, Hüseyin CumhurThe COVID-19 pandemic has posed significant challenges to existing healthcare systems around the world. The urgent need for the development of diagnostic and therapeutic strategies for COVID-19 has boomed the demand for new technologies that can improve current healthcare approaches, moving towards more advanced, digitalized, personalized, and patient-oriented systems. Microfluidic-based technologies involve the miniaturization of large-scale devices and laboratory-based procedures, enabling complex chemical and biological operations that are conventionally performed at the macro-scale to be carried out on the microscale or less. The advantages microfluidic systems offer such as rapid, low-cost, accurate, and on-site solutions make these tools extremely useful and effective in the fight against COVID-19. In particular, microfluidic-assisted systems are of great interest in different COVID-19-related domains, varying from direct and indirect detection of COVID-19 infections to drug and vaccine discovery and their targeted delivery. Here, we review recent advances in the use of microfluidic platforms to diagnose, treat or prevent COVID-19. We start by summarizing recent microfluidic-based diagnostic solutions applicable to COVID-19. We then highlight the key roles microfluidics play in developing COVID-19 vaccines and testing how vaccine candidates perform, with a focus on RNA-delivery technologies and nano-carriers. Next, microfluidic-based efforts devoted to assessing the efficacy of potential COVID-19 drugs, either repurposed or new, and their targeted delivery to infected sites are summarized. We conclude by providing future perspectives and research directions that are critical to effectively prevent or respond to future pandemics.Conference Object Computational Nanotoxicology: a Case Study With Silver and Zinc Nanomaterials(Elsevier, 2022) Bilgi, Eyüp; Öksel Karakuş, CeydaNanomaterials (NMs) have been the focus of basic and applied research for more than two decades. According to the updated consumer materials inventory, over 1800 commercial NMs have taken their place in the market, 42% of which are in health and wellness category1. The widespread use of NMs in health-related products made not only the human exposure to the (residues of) NMs inevitable but also the long-recognized concerns over their safety a priority. Despite this pressing need, more than 70% of commercially available nano-containing products do not include sufficient information about their physicochemical and/or toxicological characteristics.Conference Object Citation - WoS: 1Green Synthesis of Nanostructured Bioactive Glass for Dental Applications(Elsevier, 2022) Tüncer, Melisa; Yücesoy, Deniz Tanıl; Öksel Karakuş, CeydaCalcium sodium phosphosilicate (known as bioactive glass) is a biomaterial commonly used in dental care products and bone tissue engineering applications due to biocompatibility, bone-forming and dentin sensitivity reduction capability. Bioactive 45S5 glass, so-called NovaMin, comprises of 45% SiO2, 24.5% Na2O, 24.5% CaO, and 6% P2O5 (wt%). It is traditionally synthesized by wet chemical methods such as melt-quenching and sol-gel which requires high temperature heating and the use of a strong acid catalyst, which brings into the question of the possibility of introducing toxic acid residues into the final product. Therefore, there is a clear need to develop environmental-friendly bioactive glass synthesis methods or to modify existing ones in a way to uplift their environmental friendliness.