Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
7 results
Search Results
Article Citation - WoS: 25Citation - Scopus: 30Fabrication of 3d Printed Poly(lactic Acid) Strut and Wet-Electrospun Cellulose Nano Fiber Reinforced Chitosan-Collagen Hydrogel Composite Scaffolds for Meniscus Tissue Engineering(SAGE Publications, 2022) Güneş, Oylum Çolpankan; Kara, Aylin; Baysan, Gizem; Hüsemoğlu, Reşit Buğra; Akokay, Pınar; Ziylan Albayrak, Aylin; Ergür, Bekir Uğur; Havitçioğlu, HasanThe main goal of the study was to produce chitosan-collagen hydrogel composite scaffolds consisting of 3D printed poly(lactic acid) (PLA) strut and nanofibrous cellulose for meniscus cartilage tissue engineering. For this purpose, first PLA strut containing microchannels was incorporated into cellulose nanofibers and then they were embedded into chitosan-collagen matrix to obtain micro- and nano-sized topographical features for better cellular activities as well as mechanical properties. All the hydrogel composite scaffolds produced by using three different concentrations of genipin (0.1, 0.3, and 0.5%) had an interconnected microporous structure with a swelling ratio of about 400% and water content values between 77 and 83% which is similar to native cartilage extracellular matrix. The compressive strength of all the hydrogel composite scaffolds was found to be similar (∼32 kPa) and suitable for cartilage tissue engineering applications. Besides, the hydrogel composite scaffold comprising 0.3% (w/v) genipin had the highest tan δ value (0.044) at a frequency of 1 Hz which is around the walking frequency of a person. According to the in vitro analysis, this hydrogel composite scaffold did not show any cytotoxic effect on the rabbit mesenchymal stem cells and enabled cells to attach, proliferate and also migrate through the inner area of the scaffold. In conclusion, the produced hydrogel composite scaffold holds great promise for meniscus tissue engineering.Article Citation - WoS: 27Citation - Scopus: 28Biocomposite Scaffolds for 3d Cell Culture: Propolis Enriched Polyvinyl Alcohol Nanofibers Favoring Cell Adhesion(John Wiley and Sons Inc., 2021) Bilginer, Rumeysa; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuThe objective of this work is generation of propolis/polyvinyl alcohol (PVA) scaffold by electrospinning for 3D cell culture. Here, PVA used as co-spinning agent since propolis alone cannot be easily processed by electrospinning methodology. Propolis takes charge in maximizing biological aspect of scaffold to facilitate cell attachment and proliferation. Morphological analysis showed size of the electrospun nanofibers varied between 172-523 nm and 345-687 nm in diameter, for non-crosslinked and crosslinked scaffolds, respectively. Incorporation of propolis resulted in desired surface properties of hybrid matrix, where hybrid scaffolds highly favored protein adsorption. To examine cell compatibility, NIH-3T3 and HeLa cells were seeded on propolis/PVA hybrid scaffold. Results confirmed that integration of propolis supported cell adhesion and cell proliferation. Also, results indicated electrospun propolis/PVA hybrid scaffold provide suitable microenvironment for cell culturing. Therefore, developed hybrid scaffold could be considered as potential candidate for 3D cell culture and tissue engineering.Article Citation - WoS: 18Citation - Scopus: 17Cnt Incorporated Polyacrilonitrile/Polypyrrole Nanofibers as Keratinocytes Scaffold(Trans Tech Publications, 2019) İnce Yardımcı, Atike; Aypek, Hande; Öztürk, Özgür; Yılmaz, Selahattin; Özçivici, Engin; Meşe, Gülistan; Selamet, YusufPolypyrrole (PPy) is an attractive scaffold material for tissue engineering with its non-toxic and electrically conductive properties. There has not been enough information about PPy usage in skin tissue engineering. The aim of this study is to investigate biocompatibility of polyacrilonitrile (PAN)/PPy nanofibrous scaffold for human keratinocytes. PAN/PPy bicomponent nanofibers were prepared by electrospinning, in various PPy concentrations and with carbon nanotube (CNT) incorporation. The average diameter of electrospun nanofibers decreased with increasing PPy concentration. Further, agglomerated CNTs caused beads and disordered parts on the surface of nanofibers. Biocompatibility of these PAN/PPy and PAN/PPy/CNT scaffolds were analyzed in vitro. Both scaffolds provided adhesion and proliferation of keratinocytes. Nanofiber diameter did not significantly influence the morphology of cells. However, with increasing number of cells, cells stayed among nanofibers and this affected their shape and size. In this study, we demonstrated that PAN/PPy and PAN/PPy/CNT scaffolds enabled the growth of keratinocytes, showing their biocompatibility.Article Citation - WoS: 12Citation - Scopus: 17Fish Scale/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Nanofibrous Composite Scaffolds for Bone Regeneration(SAGE Publications, 2020) Kara, Aylin; Güneş, Oylum C.; Albayrak, Aylin Z.; Bilici, Gökçen; Erbil, Güven; Havitcioğlu, HasanThe aim of this study was to produce three-dimensional, nanofibrous fish scale/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) composite scaffolds as bone filling materials. This is the first report wherein fish scales were used within a nanofibrous matrix for bone regeneration. Composite scaffolds with a cotton wool-like structure (fiber diameter: 560 +/- 64 nm; porosity: 82%) were obtained by incorporating chopped fish scales into wet-electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanofibers and freeze-drying. The addition of the fish scales improved the mechanical properties, biomineralization tendency, cell viability, alkaline phosphatase activity, and type I collagen production. Consequently, produced composite scaffolds would be regarded to have the therapeutic capacity in bone tissue damages.Conference Object Üç Boyutlu Hücre Kültürü için Polimer Esaslı Ekstrasellüler Matriks Mimetiği(Institute of Electrical and Electronics Engineers Inc., 2017) Türker, Esra; Yıldız, Ümit Hakan; Arslan Yıldız, AhuElektro-eğirme metodu gelişmiş üretim teknolojilerindendir ve biyomedikal uygulamalarında yaygın olarak kullanılmaktadır. Özellikle doku mühendisliğinde amaç, çalışılacak doku üzerine doğal veya sentetik destek materyali (iskele) üreterek hücrenin uyum sağlayabileceği bir ortam oluşturmaktır. Bu projenin amacı üç boyutlu (3D) hücre kültürü çalışmaları için elektro-eğirme-metodu ile poli(L-laktik-co-epsilon-kaprolakton) (PLLCL) kullanılarak iskele üretilmesidir. Homojen lifler ve uygun gözenek boyutu elde etmek amacıyla optimizasyon çalışmaları yapılmıştır. Elde edilen liflerin çapı, akış hızı ve voltajın artmasıyla azalmaktadır. Taramalı uç elektron mikroskop incelemeleri (SEM) lif morfolojik yapılarının doku iskelesi fabrikasyonu için ideale yakın olduğunu ortaya çıkarmıştır.Article Citation - WoS: 4Citation - Scopus: 5Adsorption/Desorption and Biofunctional Properties of Oleuropein Loaded on Different Types of Silk Fibroin Matrices(The Society of Chemists and Techonogists of Macedonia, 2017) Bayraktar, Oğuz; Balta, Ali Bora; Başal Bayraktar, GüldemetThe objective of this study was to investigate the adsorption/desorption behavior of oleuropein on different types of silk fibroin matrices including silk fibroin microfibers (MF), regenerated silk fibroin (RSF), and silk fibroin nanofibers (NF). Nanofibers with an average diameter of ranging between 24 and 326 nm were successfully prepared using the electrospinning technique. The effects of the silk fibroin concentration, the voltage applied and the distance between needle tip and collector plate on the morphol-ogy of the NF were investigated. The adsorption capacities of MF, RSF and NF were determined as 104.92, 163.07 and 228.34 mg oleuropein per gram of material, respectively. The percentage of initially adsorbed oleuropein that was desorbed was 86.08, 91.29 and 96.67% for MF, RSF and NF, respectively. NF and RSF discs loaded with oleuropein were subjected to disc diffusion assays to determine their antibacterial activity against test microorganisms Staphylococcus epidermidis (Gram +) and Esche-richia coli (Gram -). The results showed that both biomaterials possessed antibacterial properties after loading with oleuropein. Wound scratch assays using oleuropein released from NF revealed an enhance-ment of cell migration, indicating a wound healing property of the material. In conclusion, the NF can be utilized as a biofunctional polymeric material with better perfor-mance for the adsorption and desorption of oleuropein compared with MF and RSF.Article Citation - WoS: 35Citation - Scopus: 40Olive Leaf Extract as a Crosslinking Agent for the Preparation of Electrospun Zein Fibers(John Wiley and Sons Inc., 2015) Erdogan, I.; Demir, M.; Bayraktar, O.Incorporating active agents, reinforcing structure by crosslinking, thus changing release properties, can be listed as possible modifications in preparation methods of biopolymer fibers. This study introduces oleuropein, major component of olive leaf extract (OLE), as a natural functional crosslinker for electrospun zein fibers, owing to its antioxidant and antimicrobial properties. Incorporation of OLE causes morphological and structural changes indicated by a decrease in fiber diameter up to 27%, an increase in intensity of NH bending region due to interaction with -OH groups and observation of characteristic oleuropein bands. Extract addition also enhances thermal stability. Zein fibers without OLE is fully degraded at 600C, whereas 10% of OLE loaded zein fibers is left undegraded. Fifty percent of initial phenolic content loaded into fibers is released which indicate the effect of OLE incorporation as accumulation of oleuropein. OLE-incorporated fibers immersed in PBS are less fused than pure zein fibers, due to the crosslinking effect. © 2014 Wiley Periodicals, Inc.