Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
5 results
Search Results
Article Citation - WoS: 27Citation - Scopus: 28Biocomposite Scaffolds for 3d Cell Culture: Propolis Enriched Polyvinyl Alcohol Nanofibers Favoring Cell Adhesion(John Wiley and Sons Inc., 2021) Bilginer, Rumeysa; Özkendir İnanç, Dilce; Arslan Yıldız, Ahu; Arslan Yıldız, Ahu; Yıldız, Ümit Hakan; 04.01. Department of Chemistry; 03.01. Department of Bioengineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyThe objective of this work is generation of propolis/polyvinyl alcohol (PVA) scaffold by electrospinning for 3D cell culture. Here, PVA used as co-spinning agent since propolis alone cannot be easily processed by electrospinning methodology. Propolis takes charge in maximizing biological aspect of scaffold to facilitate cell attachment and proliferation. Morphological analysis showed size of the electrospun nanofibers varied between 172-523 nm and 345-687 nm in diameter, for non-crosslinked and crosslinked scaffolds, respectively. Incorporation of propolis resulted in desired surface properties of hybrid matrix, where hybrid scaffolds highly favored protein adsorption. To examine cell compatibility, NIH-3T3 and HeLa cells were seeded on propolis/PVA hybrid scaffold. Results confirmed that integration of propolis supported cell adhesion and cell proliferation. Also, results indicated electrospun propolis/PVA hybrid scaffold provide suitable microenvironment for cell culturing. Therefore, developed hybrid scaffold could be considered as potential candidate for 3D cell culture and tissue engineering.Article Citation - WoS: 5Citation - Scopus: 6Boosting Up Printability of Biomacromolecule Based Bio-Ink by Modulation of Hydrogen Bonding Pairs(Elsevier Ltd., 2020) Köksal, Büşra; Şahin, Hasan; Önbaş, Rabia; Yıldız, Ümit Hakan; Başkurt, Mehmet; Arslan Yıldız, Ahu; Şahin, Hasan; Arslan Yıldız, Ahu; Yıldız, Ümit Hakan; 04.01. Department of Chemistry; 04.04. Department of Photonics; 03.01. Department of Bioengineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyThis study describes low dose UV curable and bioprintable new bioink made of hydrogen bond donor-acceptor adaptor molecule 2-isocyanatoethyl methacrylate (NCO)modified gelatin (NCO-Gel). Our theoretical calculations demonstrate that insertion of 2-isocyanatoethyl methacrylate doubles the interaction energy (500 meV) between gelatin chains providing significant contribution in interchain condensation and self-organization as compared to methacrylic anhydride modified gelatin (GelMA). The NCO-Gel exhibits peak around 1720 cm?1 referring to bidentate hydrogen bonding between H-NCO and its counterpart O[dbnd]CN[sbnd]H. These strong interchain interactions drive chains to be packed and thereby facilitating UV crosslinking. The NCO-Gel is exhibiting a rapid, 10 s gelation process by the exposure of laser (3 W, 365 nm). The dynamic light scattering characterization also reveals that NCO-Gel has faster sol to gel transition as compared to GelMA depending on the UV curing time. The NCO-Gel was found to be more firm and mechanically strong that provides advantages in molding as well as bioprinting processes. Bioprinted NCO-Gel has shown sharp borders and stable 3D geometry as compared to GelMA ink under 10 s UV curing time. The cell viability tests confirm that NCO-Gel facilitates cell proliferation and supports cell viability. We foresee that NCO-Gel bioink formulation provides a promising opportunity when low dose UV curing and rapid printing are required. © 2020 Elsevier LtdConference Object Citation - Scopus: 2Utilization of Near Ir Absorbing Gold Nanocolloids by Green Synthesis(Trans Tech Publications, 2018) Elveren, Beste; Yıldız, Ümit Hakan; Yıldız, Ümit Hakan; Arslan Yıldız, Ahu; 04.01. Department of Chemistry; 03.01. Department of Bioengineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyThe rapid developments in nanoscience, and its applications on biomedical areas have a large impact on drug delivery, tissue engineering, sensing, and diagnosis. Gold is widely investigated nanomaterial for the last couple of decades, since it has unique surface properties and very low toxicity to biological environment. In this work, we present a novel synthesis of gold nanoparticles (GNPs) exhibiting both visible and near-IR absorbance without agglomeration. The surface of GNPs were analyzed by routine methods and the binding kinetics were investigated by Surface Plasmon Resonance (SPR) Spectroscopy. The unique optical properties of near-IR asorbing GNP colloids hold promise for biological applications.Conference Object Kanser Öntanısı için Hücredışı Veziküller Kullanılarak Plazmonik Temelli Metodoloji Geliştirme(Institute of Electrical and Electronics Engineers Inc., 2017) Erdoğan, Duygu; Alduran, Yeşim; Arslan Yıldız, Ahu; Arslan Yıldız, Ahu; Yıldız, Ümit Hakan; 04.01. Department of Chemistry; 03.01. Department of Bioengineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologySon yıllarda, vücut sıvılarında bulunan hücredışı veziküller kanserde tanı biyobelirteci olarak kullanılmaktadır. Veziküllerin içeriği kanserin türünü ve seviyesini belirlemede rol oynayabilmektedir. Bu vezikülleri yakalama işleminde, genel olarak, Akış Sitometrisi (Flow cytometry), Western Blot, Enzime-bağlı İmmunosorbent Deneyi (ELISA) ve Yüzey Plazmon Rezonansı (SPR) metodolojileri kullanılmaktadır. Bu çalışmada vezikülleri yakalamaya yönelik plazmon temelli bir deney platformu üretilmesi önerilmiştir. Bu plazmonik platform, yüzeyde yapılacak modifikasyonlarla, yüksek hassasiyet oluşturabileceğimiz Lokalize Yüzey Plazmon Resonansı temellidir.Conference Object Üç Boyutlu Hücre Kültürü için Polimer Esaslı Ekstrasellüler Matriks Mimetiği(Institute of Electrical and Electronics Engineers Inc., 2017) Türker, Esra; Yıldız, Ümit Hakan; Yıldız, Ümit Hakan; Türker, Esra; Arslan Yıldız, Ahu; 04.01. Department of Chemistry; 03.01. Department of Bioengineering; 01.01. Units Affiliated to the Rectorate; 01. Izmir Institute of Technology; 03. Faculty of Engineering; 04. Faculty of ScienceElektro-eğirme metodu gelişmiş üretim teknolojilerindendir ve biyomedikal uygulamalarında yaygın olarak kullanılmaktadır. Özellikle doku mühendisliğinde amaç, çalışılacak doku üzerine doğal veya sentetik destek materyali (iskele) üreterek hücrenin uyum sağlayabileceği bir ortam oluşturmaktır. Bu projenin amacı üç boyutlu (3D) hücre kültürü çalışmaları için elektro-eğirme-metodu ile poli(L-laktik-co-epsilon-kaprolakton) (PLLCL) kullanılarak iskele üretilmesidir. Homojen lifler ve uygun gözenek boyutu elde etmek amacıyla optimizasyon çalışmaları yapılmıştır. Elde edilen liflerin çapı, akış hızı ve voltajın artmasıyla azalmaktadır. Taramalı uç elektron mikroskop incelemeleri (SEM) lif morfolojik yapılarının doku iskelesi fabrikasyonu için ideale yakın olduğunu ortaya çıkarmıştır.