Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
35 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 5Antioxidant and Antimicrobial Activities of Plants Grown in the Mediterranean Region(John Wiley and Sons Inc., 2022) Kaçar, D.; Bayraktar, Oğuz; Erdem, C.; Alamri, A.S.; Galanakis, C.M.Background: The main objective of this research was to identify plant species with possible bioactivities based on their total phenol content, antioxidant, and antimicrobial properties. Therefore, different parts of 42 plant species grown in the Mediterranean region were extracted with aqueous ethanol solutions to prepare extracts with antioxidant and antimicrobial activities, mainly resulting from their total phenol contents. No detailed laboratory data on the flora of this area exists regarding their total phenol contents and total antioxidant activities. Results: Yields of extraction for each plant material were determined. Extracts were characterized based on their total phenol contents, total antioxidant (both hydrophilic and lipophilic), and antimicrobial activities using Folin–Ciocalteu, Photochemiluminescence, disc diffusion, and microdilution methods, respectively. The extract of Hypericum empetrifolium had the relatively highest total water-soluble and lipid-soluble antioxidant activities. Sarcopoterium spinosum extract had relatively high total phenol content. Preliminary screening study was conducted with the disc diffusion method to evaluate the extracts' antimicrobial activities. 26 out of 42 plant species showed significant antimicrobial activities against the growth of microorganisms. Microdilution assays were performed to evaluate the most active plant species with their minimum inhibition concentrations. H. empetrifolium, Pistacia terebinthus, Arbutus unedo, and Cistus parviflorus were the most antimicrobial plant species among those investigated. CONCLUSION: The new potential sources for the isolation of bioactive natural compounds from specific plant species could be possible with the help of this present screening study. Isolated bioactive natural compounds can be utilized as raw materials in cosmetics, nutraceuticals, food supplements, and pharmaceutical industries. © 2022 Society of Chemical Industry.Review Citation - WoS: 17Citation - Scopus: 16Engineering Periodontal Tissue Interfaces Using Multiphasic Scaffolds and Membranes for Guided Bone and Tissue Regeneration(Elsevier, 2024) Özkendir, Özge; Karaca, İlayda; Çullu, Selin; Yaşar, Hüsniye Nur,; Erdoğan, Oğulcan; Dikici, Serkan; Dikici, Betul AldemirPeriodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.Article Citation - WoS: 14Citation - Scopus: 14Development of Tissue-Engineered Vascular Grafts From Decellularized Parsley Stems(Royal Society of Chemistry, 2023) Çevik, Merve; Dikici, SerkanCardiovascular diseases are mostly associated with narrowing or blockage of blood vessels, and it is the most common cause of death worldwide. The use of vascular grafts is a promising approach to bypass or replace the blocked vessels for long-term treatment. Although autologous arteries or veins are the most preferred tissue sources for vascular bypass, the limited presence and poor quality of autologous vessels necessitate seeking alternative biomaterials. Recently, synthetic grafts have gained attention as an alternative to autologous grafts. However, the high failure rate of synthetic grafts has been reported primarily due to thrombosis, atherosclerosis, intimal hyperplasia, or infection. Thrombosis, the main reason for failure upon implantation, is associated with damage or absence of endothelial cell lining in the vascular graft's luminal surface. To overcome this, tissue-engineered vascular grafts (TEVGs) have come into prominence. Alongside the well-established scaffold manufacturing techniques, decellularized plant-based constructs have recently gained significant importance and are an emerging field in tissue engineering and regenerative medicine. Accordingly, in this study, we demonstrated the fabrication of tubular scaffolds from decellularized parsley stems and recellularized them with human endothelial cells to be used as a potential TEVG. Our results suggested that the native plant DNA was successfully removed, and soft tubular biomaterials were successfully manufactured via the chemical decellularization of the parsley stems. The decellularized parsley stems showed suitable mechanical and biological properties to be used as a TEVG material, and they provided a suitable environment for the culture of human endothelial cells to attach and create a pseudo endothelium prior to implantation. This study is the first one to demonstrate the potential of the parsley stems to be used as a potential TEVG biomaterial. © 2024 The Royal Society of Chemistry.Book Part Astragalus sp.(CRC Press, 2023) Yakuboğulları, Nilgün; Bedir, ErdalAstragalus is one of the largest genera in Turkey and is widely distributed worldwide. The phytochemical studies on Turkish Astragalus species have presented 112 new compounds besides 63 known compounds. The overriding basis for biological activity studies is the traditional use of Astragalus roots in the Southeastern Region of Turkey to cure leukemia. As the isolated compounds did not show cytotoxic properties, a hypothesis that the biological activity of Astragalus saponins might result from the activation of the immune system came up. While Astragalus polysaccharides are used for their strong immunomodulatory activities in Chinese medicine, there are a few articles revealing the immunostimulatory properties of Astragalus saponins. Here, we summarized the compounds isolated from Turkish Astragalus species and concentrated on the immunomodulatory activities of these compounds to put forward their potential as saponin-based vaccine adjuvants. © 2024 selection and editorial matter, Ufuk Koca-Caliskan; individual chapters, the contributors.Article Citation - WoS: 6Citation - Scopus: 6Microbial Desalination Cell Treated Spent Geothermal Brine as a Nutrient Medium in Hydroponic Lettuce Cultivation: Health Risk Assessment(Elsevier, 2024) Goren, A. Y.; Eskisoy, D. N.; Genisoglu, S.; Okten, H. E.The scarcity and contamination of freshwater resources are extremely critical issues today, and the expansion of water reuse has been considered as an option to decrease its impact. Therefore, the reuse of microbial desalination (MDC)-treated spent geothermal brine for agricultural purposes arises as a good solution to prevent water contamination and provide sustainable water usage. In this study, the potential of treated spent geothermal water from MDC system as a nutrient solution for the hydroponic cultivation of lettuce was evaluated. The effects of different water samples (Hoagland solution (R1) as a control, MDC-treated water (R2), 1:1, v/v mixture of MDCtreated water and Hoagland solution (R3), 4:1, v/v mixture of MDC-treated water and Hoagland solution (R4), and tap water (R5)) on lettuce growth were considered. The application of R3 and R4 samples for hydroponic lettuce cultivation was promising since the lettuce plants uptake sufficient nutrients for their growth and productivity with low toxic metal concentrations. In addition, the chlorophyll-a, chlorophyll-b, and carotene contents of lettuce were in the range of 1.045-2.391 mg/g, 0.761-1.986 mg/g, and 0.296-0.423 mg/g in different water samples, respectively. The content of chlorophyll-a was highest in R1 (2.391 mg/g), followed by R3 (2.371 mg/g). Furthermore, the health risk assessment of heavy metal accumulations in the lettuce plants cultivated in the various water samples was determined. Results showed that heavy metal exposure via lettuce consumption is unlikely to suffer noticeable adverse health problems with values below the permissible limit value.Conference Object Biopatterning of 3d Cellular Structures Via Contactless Magnetic Manipulation for Drug Screening(Mary Ann Liebert, 2023) Önbaş, Rabia; Arslan Yıldız, Ahu"Patterning and manipulation techniques have been used to fabricate 3D cell cultures in tissue engineering. The contactless magnetic manipulation approach is a rapid, simple, and cost-effective method that requires paramagnetic agents [1-3] or magnetic materials [4]. Here, to obtain patterned 3D cellular structures a new alginate-based bio-ink formulation was developed to fabricate 3D cellular structures using contactless magnetic manipulation. 3D cardiac model was obtained by patterning rat cardiomyocytes. Cellular and extracellular components and cardiac-specific markers of patterned 3D cellular structures were indicated successfully. Drug response of patterned 3D cellular structures was evaluated by applying doxorubicin. Patterned 3D cardiac cellular structures showed significantly different drug response compared to conventional 2D cell cultures. In conclusion, this technique provides an easy, efficient, and low-cost methodology to fabricate 3D cardiac structures for drug screening.Article Citation - WoS: 13Citation - Scopus: 17Machine Learning-Assisted Prediction of the Toxicity of Silver Nanoparticles: a Meta-Analysis(Springer, 2023) Bilgi, Eyüp; Öksel Karakuş, CeydaSilver nanoparticles are likely to be more dangerous than other forms of silver due to the intracellular release of silver ions upon dissolution and the formation of mixed ion-containing complexes. Such concerns have resulted in an ever-growing pile of scientific evaluations addressing the safety aspects of nanosilver with widely varying methodological approaches. The substantial differences in the conduct/design of nanotoxicity screening have led to the generation of conflicting findings that may be accurate in their narrative but fail to provide a complete picture. One strategy to maximize the use of individual risk assessments with potentially biased estimates of toxicological effects is to homogenize results across several studies and to increase the generalizability and human relevance of their findings. Here, we collected a large pool of data (n=162 independent studies) on the cytotoxicity of nanosilver and unrevealed potential triggers of toxicity. Two different machine learning approaches, decision tree (DT) and artificial neural network (ANN), were primarily employed to develop models that can predict the cytotoxic potential of nanosilver based on material- and assay-related parameters. Other machine learning algorithms (logistic regression, Gaussian Naive Bayes, k-nearest neighbor, and random forest classifiers) were also applied. Among several attributes compared, exposure concentration, duration, zeta potential, particle size, and coating were found to have the most substantial impact on nanotoxicity, with biomolecule- and microorganism-assisted surface modifications having the most beneficial and detrimental effects on cell survival, respectively. Such machine learning-assisted efforts are critical to developing commercially viable and safe nanosilver-containing products in the ever-expanding nanobiomaterial market.Article Citation - WoS: 4Citation - Scopus: 4Optimizing the Dispersion of Calcium Phosphate Nanoparticles for Cellular Studies Using Statistical Design of Experiments(Elsevier, 2023) Önder, Anıl Can; Tomak, Aysel; Öksel Karakuş, CeydaThe in vitro experimentation of ceramic nanoparticles often requires their dispersion in liquid media without causing particle clumps or deteriorating sample integrity. However, the dispersion of nanoparticles using the available protocols rarely leads to stable and uniform dispersions which, in turn, raises concerns about the validity, repeatability and comparability of the findings observed in vitro. Moreover, the ability to control the final dispersion quality of ceramic nanoparticles is an essential step to obtaining optimized nanoceramic materials with desired functionality and to enhancing their performance in subsequent applications. While the need to have a comprehensive guideline for the dispersion of nanoparticles has led to several published documents and protocols, the dispersion methodology of ceramic nanoparticles and the relative contribution of the experimental parameters to the quality of resulting dispersion are still not clear. Here, we employed the statistical design of experiment (DoE) approach to systematically assess the magnitude and source of variation in dispersion quality of two different ceramic nanoparticles, hydroxyapatite and tricalcium phosphate. Using the first-order Plackett-Burman Design (PBD), nanoparticle concentration, pH and the presence of an additive were identified as the most critical factors influencing the resulting hydrodynamic size and zeta potential of the ceramic nanoparticles. Optimization using a second-order Central Composite Design (CCD) yielded a set of quadratic regression equations that were used to predict the hydrodynamic size or zeta potential of ceramic nanoparticles with high accuracy (R2, 0.88–0.92). The results of PBD screening and CCD optimization experiments were employed to prepare nanoparticle dispersions of different quality, which were then used to compare the effect of aggregation on the viability of human osteosarcoma (SaOS-2) cells. Overall, the results of this study provided insight into the role that various experimental parameters play in the colloidal stability and dispersion of ceramic nanoparticles. © 2023Article Citation - WoS: 8Citation - Scopus: 9Development of Plant-Based Biopolymer Coatings for 3d Cell Culture: Boron-Silica Quince Seed Mucilage Nanocomposites(Royal Society of Chemistry, 2023) Yılmaz, Hilal Deniz; Cengiz, Uğur; Derkuş, Burak; Arslan, Yavuz EmreSpheroid formation with spontaneous aggregation has captured interest in most cell culture studies due to its easy set-up and more reliable results. However, the economic and technical costs of the advanced systems and commercial ultra-low adhesive platforms have pushed researchers into pursuing alternatives. Nowadays, polymeric coatings, including poly-hydroxyethyl methacrylate and agar/agarose, are the commonly used polymers for non-adhesive plate fabrication, yet the costs and working solvent or heat-dependent preparation procedures maintain the need for the development of novel biomaterials. Here, we propose a greener and more economical approach for producing non-adherent surfaces and spheroid formation. For this, a plant waste-based biopolymer from quince fruit (Cydonia oblonga Miller, from Rosaceae family) seeds and boron-silica precursors were introduced. The unique water-holding capacity of quince seed mucilage (Q) was enriched with silanol and borate groups to form bioactive and hydrophilic nanocomposite overlays for spheroid studies. Moreover, 3D gel plates from the nanocomposite material were fabricated and tested in vitro as a proof-of-concept. The surface properties of coatings and the biochemical and mechanical properties of the nanocomposite materials were evaluated in-depth with techniques, and extra hydrophilic coatings were obtained. Three different cell lines were cultured on these nanocomposite surfaces, and spheroid formation with increased cellular viability was recorded on day 3 with a >200 & mu;m spheroid size. Overall, Q-based nanocomposites are believed to be a fantastic alternative for non-adherent surface fabrication due to their low-cost, easy operation, and intrinsic hydration layer forming capacity with biocompatible nature in vitro.Article Citation - WoS: 19Citation - Scopus: 21Telomerase Activators From 20(27)-Octanor Via Biotransformation by the Fungal Endophytes(Academic Press, 2021) Duman, Seda; Ekiz, Güner; Yılmaz, Sinem; Yusufoğlu, Hasan; Ballar Kırmızıbayrak, Petek; Bedir, ErdalCycloastragenol [20(R),24(S)-epoxy-3 beta,6 alpha,16 beta,25-tetrahydroxycycloartane] (CA), the principle sapogenol of many cycloartane-type glycosides found in Astragalus genus, is currently the only natural product in the anti-aging market as telomerase activator. Here, we report biotransformation of 20(27)-octanor-cycloastragenol (1), a thermal degradation product of CA, using Astragalus species originated endophytic fungi, viz. Penicillium roseopurpureum, Alternaria eureka, Neosartorya hiratsukae and Camarosporium laburnicola. Fifteen new biotransformation products (2-16) were isolated, and their structures were established by NMR and HRESIMS. Endophytic fungi were found to be capable of performing hydroxylation, oxidation, ring cleavage-methyl migration, dehydrogenation and Baeyer-Villiger type oxidation reactions on the starting compound (1), which would be difficult to achieve by conventional synthetic methods. In addition, the ability of the metabolites to increase telomerase activation in Hekn cells was evaluated, which showed from 1.08 to 12.4-fold activation compared to the control cells treated with DMSO. Among the compounds tested, 10, 11 and 12 were found to be the most potent in terms of telomerase activation with 12.40-, 7.89- and 5.43-fold increase, respectively (at 0.1, 2 and 10 nM concentrations, respectively).