Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
7 results
Search Results
Review Citation - WoS: 17Citation - Scopus: 16Engineering Periodontal Tissue Interfaces Using Multiphasic Scaffolds and Membranes for Guided Bone and Tissue Regeneration(Elsevier, 2024) Özkendir, Özge; Karaca, İlayda; Çullu, Selin; Yaşar, Hüsniye Nur,; Erdoğan, Oğulcan; Dikici, Serkan; Dikici, Betul AldemirPeriodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.Article Citation - WoS: 6Citation - Scopus: 6Microbial Desalination Cell Treated Spent Geothermal Brine as a Nutrient Medium in Hydroponic Lettuce Cultivation: Health Risk Assessment(Elsevier, 2024) Goren, A. Y.; Eskisoy, D. N.; Genisoglu, S.; Okten, H. E.The scarcity and contamination of freshwater resources are extremely critical issues today, and the expansion of water reuse has been considered as an option to decrease its impact. Therefore, the reuse of microbial desalination (MDC)-treated spent geothermal brine for agricultural purposes arises as a good solution to prevent water contamination and provide sustainable water usage. In this study, the potential of treated spent geothermal water from MDC system as a nutrient solution for the hydroponic cultivation of lettuce was evaluated. The effects of different water samples (Hoagland solution (R1) as a control, MDC-treated water (R2), 1:1, v/v mixture of MDCtreated water and Hoagland solution (R3), 4:1, v/v mixture of MDC-treated water and Hoagland solution (R4), and tap water (R5)) on lettuce growth were considered. The application of R3 and R4 samples for hydroponic lettuce cultivation was promising since the lettuce plants uptake sufficient nutrients for their growth and productivity with low toxic metal concentrations. In addition, the chlorophyll-a, chlorophyll-b, and carotene contents of lettuce were in the range of 1.045-2.391 mg/g, 0.761-1.986 mg/g, and 0.296-0.423 mg/g in different water samples, respectively. The content of chlorophyll-a was highest in R1 (2.391 mg/g), followed by R3 (2.371 mg/g). Furthermore, the health risk assessment of heavy metal accumulations in the lettuce plants cultivated in the various water samples was determined. Results showed that heavy metal exposure via lettuce consumption is unlikely to suffer noticeable adverse health problems with values below the permissible limit value.Book Part Citation - Scopus: 2Bioprinting of Hydrogels for Tissue Engineering and Drug Screening Applications(Elsevier, 2022) Özmen, Ece; Yıldırım, Özüm; Arslan Yıldız, AhuIn tissue engineering, the 3-dimensional (3D) bioprinting method that enables the production of 3D structures by combining bioinks and cells has become one of the most promising technique. Over the last few years, 3D cell culture models gained importance in the development of disease model and drug development studies. The successful production of the 3D structures by 3D bioprinting mostly depends on the properties of the bioink to be used. Hydrogels, which are natural or synthetic polymers, are generally preferred as bioink materials with their high swelling ability, biocompatibility, biodegradability, and easy gelation ability. The convenience of hydrogels for varied bioprinting applications make them proper bioink materials for bioprinting of artificial tissues, tumor models, and tissue grafts. Bioprinting of functional tissues is successfully performed for years, and hydrogels are utilized as bioink in bone, vascular, neural, cartilage, cardiac, skin tissue engineering, and drug screening. In this chapter, bioprinting methodology, bioinks, hydrogel bioinks, and their applications are discussed in detail. © 2023 Elsevier Inc. All rights reserved.Article Citation - WoS: 4Citation - Scopus: 4Optimizing the Dispersion of Calcium Phosphate Nanoparticles for Cellular Studies Using Statistical Design of Experiments(Elsevier, 2023) Önder, Anıl Can; Tomak, Aysel; Öksel Karakuş, CeydaThe in vitro experimentation of ceramic nanoparticles often requires their dispersion in liquid media without causing particle clumps or deteriorating sample integrity. However, the dispersion of nanoparticles using the available protocols rarely leads to stable and uniform dispersions which, in turn, raises concerns about the validity, repeatability and comparability of the findings observed in vitro. Moreover, the ability to control the final dispersion quality of ceramic nanoparticles is an essential step to obtaining optimized nanoceramic materials with desired functionality and to enhancing their performance in subsequent applications. While the need to have a comprehensive guideline for the dispersion of nanoparticles has led to several published documents and protocols, the dispersion methodology of ceramic nanoparticles and the relative contribution of the experimental parameters to the quality of resulting dispersion are still not clear. Here, we employed the statistical design of experiment (DoE) approach to systematically assess the magnitude and source of variation in dispersion quality of two different ceramic nanoparticles, hydroxyapatite and tricalcium phosphate. Using the first-order Plackett-Burman Design (PBD), nanoparticle concentration, pH and the presence of an additive were identified as the most critical factors influencing the resulting hydrodynamic size and zeta potential of the ceramic nanoparticles. Optimization using a second-order Central Composite Design (CCD) yielded a set of quadratic regression equations that were used to predict the hydrodynamic size or zeta potential of ceramic nanoparticles with high accuracy (R2, 0.88–0.92). The results of PBD screening and CCD optimization experiments were employed to prepare nanoparticle dispersions of different quality, which were then used to compare the effect of aggregation on the viability of human osteosarcoma (SaOS-2) cells. Overall, the results of this study provided insight into the role that various experimental parameters play in the colloidal stability and dispersion of ceramic nanoparticles. © 2023Book Part Noncoding Way of the Metastasis(Elsevier, 2022) Göker Bağca, Bakiye; Kuşoğlu, Alican; Çeşmeli, Selin; Biray Avcı, ÇığırAccording to the World Health Organization statistics, the second leading cause of death globally is cancer. Together with this, metastasis is viewed as the leading cause of cancer death in patients with the disease due to the lack of treatment modalities for malignant tumors. One of the key mechanisms related to cancer metastasis is the epithelial-mesenchymal transition which enables epithelial cancer cells to gain mesenchymal cancer cell properties with elevated migration and invasion capacity that make it easy to spread distant tissues and survive from harsh conditions. Studies indicate that metastatic cancer cells have a gene expression signature that ensures those cells have increased migratory capacity as well as increased survival rate in circulation. Recently, the relationship of metastasis with two types of noncoding RNAs (ncRNAs), microRNAs (miRNAs), and long noncoding RNAs (lncRNAs) has been getting attention. In this chapter, the role of miRNAs and lncRNAs and treatment strategies regarding the role of ncRNAs in metastasis biology will be evaluated.Article Citation - WoS: 11Citation - Scopus: 11Absorbance-Based Detection of Arsenic in a Microfluidic System With Push-And Pumping(Elsevier, 2021) Karakuzu, Betül; Gülmez, Yekta; Tekin, H. CumhurRapid and portable analysis of arsenic (As) contamination in drinking water is very important due to its adverse health effects on humans. Available commercial detection kits have shown low sensitivity and selectivity in analysis, and also they can generate harmful by-products. Microfluidic-based approaches allow portable analysis with gold nanoparticles (AuNPs) as labels. However, they need complex surface modification steps that complicate detection protocols. Due to the lack of precise sensing and affordable solution, we focused on developing a microfluidic platform that uses a push-and-pull pumping method for sensitive detection of As. In this detection principle, a sample is introduced in the microfluidic channel modified with -SH functional groups where As can bind. Then, AuNPs are given in the channel and AuNPs bind on free -SH functional groups which are not allocated with As. Absorbance measurements are conducted to detect AuNPs absorbed on the surfaces and the resulting absorbance value is inversely proportional with As concentration. The method enables detection of As down to 2.2 mu g/L concentration levels in drinking water, which is well-below the allowed maximum As concentration of 10 mu g/L in the drinking waters by the World Health Organization (WHO). The paper reveals that multiple push-and-pull pumping of fixed volume of sample and AuNPs with a syringe pump can improve the binding efficiency in the microfluidic channel. With this technique, low amounts of sample (1 mL) and short total assay time (25 min) are sufficient to detect As.Article Citation - WoS: 12Citation - Scopus: 12Isolation of Rosmarinic Acid and Methyl Rosmarinate as Lipoxygenase Inhibitors From Salvia Palaestina Benth. by Activity-Guided Fractionation(Elsevier, 2021) İçen, Mehmet Sina; Gürbüz, İlhan; Bedir, Erdal; Günbatan, Tuğba; Demirci, FatihSalvia palaestina aqueous and methanol extracts were prepared from the aerial parts, which were evaluated for the in vitro anti-inflammatory properties using the lipoxygenase (LO) enzyme inhibition assay. While the aqueous extract showed no activity at test concentrations, a significant (p < 0.001) lipoxygenase inhibition was detected for the methanol extract with 29% inhibition. Activity guided fractionation was carried out on the methanol extract via liquid-liquid partitioning using n-hexane, dichloromethane, ethyl acetate, and n-butanol. The ethyl acetate fraction showed statistically the best inhibition among the sub-fractions with 70% inhibition (p < 0.0001). The compounds responsible for the activity were purified, and their structures were established as rosmarinic acid, and methyl rosmarinate by spectroscopic methods. IC50 values of rosmarinic acid, and methyl rosmarinate were calculated as 0.21 and 0.02 ?M, respectively. In conclusion, the in vitro anti-inflammatory potential of S. palaestina was associated to rosmarinic acid, and methyl rosmarinate, for the first time to the best of our knowledge. © 2021 SAAB