Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
4 results
Search Results
Conference Object Bioethanol Production From Low Cost Agro-Industrial Waste Products(Elsevier, 2012) Evcan, Ezgi; Tarı, Canan; Özen, BanuIn recent years, the rapid increase in environmental problems, greenhouse gas emissions, fuel prices and the unlimited consumption of limited fossil fuel stocks made people search for some alternative energy sources. Bioethanol is one of the most popular alternative source with its many beneficial features. Besides, bioethanol which will be obtained from low cost raw materials will be more attractive. Bioethanol produced from lignocellulosic biomass sources, such as agricultural residues, offers unique environmental and economic benefits.Article Kinetic and Structural Characterization of Interaction Between Trypsin and Equisetum Arvense Extract(Türk Biyokimya Derneği, 2014) Uslu, Mehmet Emin; Bayraktar, Oğuz; Ceylan, ÇağatayObjective: In this study the inhibitory effect of E. arvense extract on trypsin activity and the effect of trypsin on E. arvense extract were studied. In addition the nature of the interaction between the extract and trypsin was investigated. Methods: The inhibitory effect ethanol extract of E. arvense on trypsin activity was determined using trypsin enzyme assay. The structural effects of the extract-trypsin interaction for the extract were analyzed by FTIR. Finally, the HPLC analyses were carried out to analyze the individual components of the extract and the supernatant and soluble precipitate phases. Results: E. arvense extract was found to decrease total percent activity of trypsin to 5% in 24 hour at 24 °C. FTIR analyses indicated that the interaction between trypsin and E. arvense extract caused changes in the structure and hydrogen bonding behavior and composition of the extract proteins. These interactions also caused the extract lipids to accumulate in the insoluble precipitate phase. Most of the phenolics remained in the supernatant phase enhancing the inactivation of trypsin. However, the precipitated compounds were shown to be of apolar in nature as shown in the HPLC chromatograms. Conclusion: The methods that were used showed that the high phenolic content of E. arvense was the main reason for the inhibition of trypsin enzyme activity by denaturing the enzyme.Article Citation - WoS: 124Citation - Scopus: 144Use of Uv-C Radiation as a Non-Thermal Process for Liquid Egg Products (lep)(Elsevier Ltd., 2008) Ünlütürk, Sevcan; Atılgan, Mehmet Reşat; Baysal, Ayşe Handan; Tarı, CananThe efficacy of short wave ultraviolet light (UV-C) as a non-thermal process for liquid egg products (LEP) was investigated. Non-pathogenic Escherichia coli strain (ATCC 8739), which shows lower sensitivity to UV-C light than E. coli O157:H7 and Salmonella typhimurium, was chosen as a target microorganism. The inactivation of UV resistant strain of E. coli in LEP was examined by evaluating the effects of depth of liquid food medium (0.5, 0.3 and 0.153 cm), UV light intensity (1.314, 0.709 and 0.383 mW/cm2) and exposure time (0, 5, 10, and 20 min) by using a collimated beam apparatus. The best reduction (>2-log) was achieved in liquid egg white (LEW) when the fluid depth and UV intensity were 0.153 cm and 1.314 mW/cm2, respectively. Maximum inactivation was 0.675-log CFU/ml in liquid egg yolk (LEY) and 0.316-log CFU/ml in liquid whole egg (LWE) at the same conditions. The kinetics of UV inactivation of E. coli in LEP was nonlinear. Our results emphasize that UV-C radiation can be used as a pre-treatment process or combined with mild heat treatment to reduce the adverse effects of thermal pasteurization of LEP.Conference Object Citation - WoS: 10Citation - Scopus: 13Preparation and Characterization of Polylactide-Hydroxyapatite Biocomposites(Trans Tech Publications, 2004) Gültekin, Naz; Tıhmınlıoğlu, Funda; Çiftçioğlu, Rukiye; Çiftçioğlu, Muhsin; Harsa, Hayriye ŞebnemIn the present study, the preparation and characterization of polylactide-Hydroxyapatite(HA) composite films for biomedical applications have been studied. The effects of number of parameters such as polymer type, HA loading, surface modification and its concentration on the mechanical and microstructural properties of the composites were investigated. Poly-L-Lactide and 96/4 Poly(L-Lactide co D-Lactide) copolymer-HA composites containing 10-40 wt% HA particles have been prepared by solvent casting technique. The HA powder was synthesized by precipitation technique. Interfacial interactions between HA and polylactide polymer were modified to improve filler compatibility and mechanical properties of the composites by surface treatment of the HA with two different silane coupling agents; 3-aminopropyltriemoxysilane (AMPTES) and 3-mercaptopropyltrimethoxysilane (MPTMS) at three different concentrations(0.5-2 wt%). Silane treatment indicated improvements in the mechanical properties of the composites compared to the untreated HA loaded polylactide composites. Tensile test results showed that the maximum improvement in the mechanical properties of the composites was obtained for PLA composites containing 1 wt% aminofunctional silane treated HA and 0.5-wt% mercaptopropyltrimethoxy silane treated HA for PDLA composites. Scanning electron microscopy studies also revealed better dispersion of silane treated HA particles in the polymer matrix.