Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
4 results
Search Results
Article Citation - WoS: 18Citation - Scopus: 17Cnt Incorporated Polyacrilonitrile/Polypyrrole Nanofibers as Keratinocytes Scaffold(Trans Tech Publications, 2019) İnce Yardımcı, Atike; Aypek, Hande; Öztürk, Özgür; Yılmaz, Selahattin; Özçivici, Engin; Meşe, Gülistan; Selamet, YusufPolypyrrole (PPy) is an attractive scaffold material for tissue engineering with its non-toxic and electrically conductive properties. There has not been enough information about PPy usage in skin tissue engineering. The aim of this study is to investigate biocompatibility of polyacrilonitrile (PAN)/PPy nanofibrous scaffold for human keratinocytes. PAN/PPy bicomponent nanofibers were prepared by electrospinning, in various PPy concentrations and with carbon nanotube (CNT) incorporation. The average diameter of electrospun nanofibers decreased with increasing PPy concentration. Further, agglomerated CNTs caused beads and disordered parts on the surface of nanofibers. Biocompatibility of these PAN/PPy and PAN/PPy/CNT scaffolds were analyzed in vitro. Both scaffolds provided adhesion and proliferation of keratinocytes. Nanofiber diameter did not significantly influence the morphology of cells. However, with increasing number of cells, cells stayed among nanofibers and this affected their shape and size. In this study, we demonstrated that PAN/PPy and PAN/PPy/CNT scaffolds enabled the growth of keratinocytes, showing their biocompatibility.Conference Object Üç Boyutlu Hücre Kültürü için Polimer Esaslı Ekstrasellüler Matriks Mimetiği(Institute of Electrical and Electronics Engineers Inc., 2017) Türker, Esra; Yıldız, Ümit Hakan; Arslan Yıldız, AhuElektro-eğirme metodu gelişmiş üretim teknolojilerindendir ve biyomedikal uygulamalarında yaygın olarak kullanılmaktadır. Özellikle doku mühendisliğinde amaç, çalışılacak doku üzerine doğal veya sentetik destek materyali (iskele) üreterek hücrenin uyum sağlayabileceği bir ortam oluşturmaktır. Bu projenin amacı üç boyutlu (3D) hücre kültürü çalışmaları için elektro-eğirme-metodu ile poli(L-laktik-co-epsilon-kaprolakton) (PLLCL) kullanılarak iskele üretilmesidir. Homojen lifler ve uygun gözenek boyutu elde etmek amacıyla optimizasyon çalışmaları yapılmıştır. Elde edilen liflerin çapı, akış hızı ve voltajın artmasıyla azalmaktadır. Taramalı uç elektron mikroskop incelemeleri (SEM) lif morfolojik yapılarının doku iskelesi fabrikasyonu için ideale yakın olduğunu ortaya çıkarmıştır.Article Citation - WoS: 4Citation - Scopus: 5Adsorption/Desorption and Biofunctional Properties of Oleuropein Loaded on Different Types of Silk Fibroin Matrices(The Society of Chemists and Techonogists of Macedonia, 2017) Bayraktar, Oğuz; Balta, Ali Bora; Başal Bayraktar, GüldemetThe objective of this study was to investigate the adsorption/desorption behavior of oleuropein on different types of silk fibroin matrices including silk fibroin microfibers (MF), regenerated silk fibroin (RSF), and silk fibroin nanofibers (NF). Nanofibers with an average diameter of ranging between 24 and 326 nm were successfully prepared using the electrospinning technique. The effects of the silk fibroin concentration, the voltage applied and the distance between needle tip and collector plate on the morphol-ogy of the NF were investigated. The adsorption capacities of MF, RSF and NF were determined as 104.92, 163.07 and 228.34 mg oleuropein per gram of material, respectively. The percentage of initially adsorbed oleuropein that was desorbed was 86.08, 91.29 and 96.67% for MF, RSF and NF, respectively. NF and RSF discs loaded with oleuropein were subjected to disc diffusion assays to determine their antibacterial activity against test microorganisms Staphylococcus epidermidis (Gram +) and Esche-richia coli (Gram -). The results showed that both biomaterials possessed antibacterial properties after loading with oleuropein. Wound scratch assays using oleuropein released from NF revealed an enhance-ment of cell migration, indicating a wound healing property of the material. In conclusion, the NF can be utilized as a biofunctional polymeric material with better perfor-mance for the adsorption and desorption of oleuropein compared with MF and RSF.Article Citation - WoS: 35Citation - Scopus: 40Olive Leaf Extract as a Crosslinking Agent for the Preparation of Electrospun Zein Fibers(John Wiley and Sons Inc., 2015) Erdogan, I.; Demir, M.; Bayraktar, O.Incorporating active agents, reinforcing structure by crosslinking, thus changing release properties, can be listed as possible modifications in preparation methods of biopolymer fibers. This study introduces oleuropein, major component of olive leaf extract (OLE), as a natural functional crosslinker for electrospun zein fibers, owing to its antioxidant and antimicrobial properties. Incorporation of OLE causes morphological and structural changes indicated by a decrease in fiber diameter up to 27%, an increase in intensity of NH bending region due to interaction with -OH groups and observation of characteristic oleuropein bands. Extract addition also enhances thermal stability. Zein fibers without OLE is fully degraded at 600C, whereas 10% of OLE loaded zein fibers is left undegraded. Fifty percent of initial phenolic content loaded into fibers is released which indicate the effect of OLE incorporation as accumulation of oleuropein. OLE-incorporated fibers immersed in PBS are less fused than pure zein fibers, due to the crosslinking effect. © 2014 Wiley Periodicals, Inc.