Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
68 results
Filters
Settings
Search Results
Article Citation - Scopus: 3Development of Chrono-Spectral Gold Nanoparticle Growth Based Plasmonic Biosensor Platform(Elsevier, 2024) Sözmen, Alper Baran; Elveren, Beste; Erdoğan, Duygu; Mezgil, Bahadır; Baştanlar, Yalın; Yıldız, Ümit Hakan; Arslan Yıldız, AhuPlasmonic sensor platforms are designed for rapid, label-free, and real-time detection and they excel as the next generation biosensors. However, current methods such as Surface Plasmon Resonance require expertise and well-equipped laboratory facilities. Simpler methods such as Localized Surface Plasmon Resonance (LSPR) overcome those limitations, though they lack sensitivity. Hence, sensitivity enhancement plays a crucial role in the future of plasmonic sensor platforms. Herein, a refractive index (RI) sensitivity enhancement methodology is reported utilizing growth of gold nanoparticles (GNPs) on solid support and it is backed up with artificial neural network (ANN) analysis. Sensor platform fabrication was initiated with GNP immobilization onto solid support; immobilized GNPs were then used as seeds for chrono-spectral growth, which was carried out using NH2OH at varied incubation times. The response to RI change of the platform was investigated with varied concentrations of sucrose and ethanol. The detection of bacteria E.coli BL21 was carried out for validation as a model microorganism and results showed that detection was possible at 102 CFU/ml. The data acquired by spectrophotometric measurements were analyzed by ANN and bacteria classification with percentage error rates near 0% was achieved. The proposed LSPR-based, label-free sensor application proved that the developed methodology promises utile sensitivity enhancement potential for similar sensor platforms. © 2024 The Author(s)Article Citation - WoS: 1Citation - Scopus: 1The Soft Nanodots as Fluorescent Probes for Cell Imaging: Analysis of Cell and Spheroid Penetration Behavior of Single Chain Polymer Dots(Wiley, 2024) Yücel, Müge; Onbaş, Rabia; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes the formation, size control, and penetration behavior of polymer nanodots (Pdots) consisting of single or few chain polythiophene-based conjugated polyelectrolytes (CPEs) via nanophase separation between good solvent and poor solvent of CPE. Though the chain singularity may be associated with dilution nanophase separation suggests that molecules of a good solvent create a thermodynamically driven solvation layer surrounding the CPEs and thereby separating the single chains even in their poor solvents. This statement is therefore corroborated with emission intensity/lifetime, particle size, and scattering intensity of polyelectrolyte in good and poor solvents. Regarding the augmented features, Pdots are implemented into cell imaging studies to understand the nuclear penetration and to differentiate the invasive characteristics of breast cancer cells. The python based red, green, blue (RGB) color analysis depicts that Pdots have more nuclear penetration ability in triple negative breast cancer cells due to the different nuclear morphology in shape and composition and Pdots have penetrated cell membrane as well as extracellular matrix in spheroid models. The current Pdot protocol and its utilization in cancer cell imaging are holding great promise for gene/drug delivery to target cancer cells by explicitly achieving the very first priority of nuclear intake. The penetration capability of cationic soft nanodots in to tumor models of breast cancer is demonstrated. The image analysis based on fluorescence intensity variation reveals the characteristics of translocation of nanodots in dense mediums such as tumor models.imageArticle Citation - WoS: 14Citation - Scopus: 14Development of Tissue-Engineered Vascular Grafts From Decellularized Parsley Stems(Royal Society of Chemistry, 2023) Çevik, Merve; Dikici, SerkanCardiovascular diseases are mostly associated with narrowing or blockage of blood vessels, and it is the most common cause of death worldwide. The use of vascular grafts is a promising approach to bypass or replace the blocked vessels for long-term treatment. Although autologous arteries or veins are the most preferred tissue sources for vascular bypass, the limited presence and poor quality of autologous vessels necessitate seeking alternative biomaterials. Recently, synthetic grafts have gained attention as an alternative to autologous grafts. However, the high failure rate of synthetic grafts has been reported primarily due to thrombosis, atherosclerosis, intimal hyperplasia, or infection. Thrombosis, the main reason for failure upon implantation, is associated with damage or absence of endothelial cell lining in the vascular graft's luminal surface. To overcome this, tissue-engineered vascular grafts (TEVGs) have come into prominence. Alongside the well-established scaffold manufacturing techniques, decellularized plant-based constructs have recently gained significant importance and are an emerging field in tissue engineering and regenerative medicine. Accordingly, in this study, we demonstrated the fabrication of tubular scaffolds from decellularized parsley stems and recellularized them with human endothelial cells to be used as a potential TEVG. Our results suggested that the native plant DNA was successfully removed, and soft tubular biomaterials were successfully manufactured via the chemical decellularization of the parsley stems. The decellularized parsley stems showed suitable mechanical and biological properties to be used as a TEVG material, and they provided a suitable environment for the culture of human endothelial cells to attach and create a pseudo endothelium prior to implantation. This study is the first one to demonstrate the potential of the parsley stems to be used as a potential TEVG biomaterial. © 2024 The Royal Society of Chemistry.Article Citation - WoS: 18Citation - Scopus: 17Modifying Pickering Polymerized High Internal Phase Emulsion Morphology by Adjusting Particle Hydrophilicity(Elsevier, 2024) Durgut, Enes; Zhou, Muchu; Dikici, Betuel Aldemir; Foudazi, Reza; Claeyssens, FrederikThis study investigates the use of submicron polymeric particles with varying crosslinking densities as the sole stabilizer for producing Polymerized High Internal Phase Emulsions (PolyHIPE). We establish a direct correlation between the crosslinking density and the hydrophilicity of the polymer particles. The hydrophilicity of these particles significantly influences the morphology and rheology of HIPEs. These differences manifest as various morphological variations in the resulting PolyHIPE templates. It was discovered that by increasing the crosslinker weight percentage in the particles from 0 % to 100 %, PolyHIPEs with semi-open, open, and closed porous structures can be obtained. Furthermore, non-crosslinked particles were observed to dissolve in the continuous phase, acting as macromolecular surfactants that generate small pores akin to surfactant-stabilized structures in PolyHIPE. These findings offer fresh insights into the relationship between particle localization at the interface, HIPE rheology, and the formation of pore throats in Pickering PolyHIPEs, leading to the creation of either closed or open porous networks. Additionally, interfacial rheological results demonstrate that particles synthesized with varying monomer-to-crosslinker ratios exhibit different interfacial elasticities, which are linked to PolyHIPE morphology.Article Citation - Scopus: 11Μdacs Platform: a Hybrid Microfluidic Platform Using Magnetic Levitation Technique and Integrating Magnetic, Gravitational, and Drag Forces for Density-Based Rare Cancer Cell Sorting(Elsevier, 2023) Keçili, Seren; Yılmaz, Esra; Özçelik, Özge Solmaz; Anıl İnevi, Müge; Günyüz, Zehra Elif; Yalçın Özuysal, Özden; Özçivici, Engin; Tekin, Hüseyin CumhurCirculating tumor cells (CTCs) are crucial indicators of cancer metastasis. However, their rarity in the bloodstream and the heterogeneity of their surface biomarkers present challenges for their isolation. Here, we developed a hybrid microfluidic platform (microfluidic-based density-associated cell sorting (µDACS) platform) that utilizes density as a biophysical marker to sort cancer cells from the population of white blood cells (WBCs). The platform utilizes the magnetic levitation technique on a microfluidic chip to sort cells based on their specific density ranges, operating under a continuous flow condition. By harnessing magnetic, gravitational, and drag forces, the platform efficiently separates cells. This approach involves a microfluidic chip equipped with a microseparator, which directs cells into top and bottom outlets depending on their levitation heights, which are inversely proportional to their densities. Hence, low-density cancer cells are collected from the top outlet, while high-density WBCs are collected from the bottom outlet. We optimized the sorting efficiency by varying the flow rates, and concentrations of the sorting medium's paramagnetic properties using standard densities of polymeric microspheres. To demonstrate the platform's applicability, we performed hybrid microfluidic sorting on MDA-MB-231 human breast cancer cells and U-937 human monocytes. The results showed efficient sorting of rare cancer cells (≥100 cells/mL) from serum samples, achieving a sorting efficiency of ∼70% at a fast-processing speed of 1 mL h−1. This label-free approach holds promise for rapid and cost-effective CTC sorting, facilitating in-vitro diagnosis and prognosis of cancer. © 2023 The Author(s)Conference Object Biopatterning of 3d Cellular Structures Via Contactless Magnetic Manipulation for Drug Screening(Mary Ann Liebert, 2023) Önbaş, Rabia; Arslan Yıldız, Ahu"Patterning and manipulation techniques have been used to fabricate 3D cell cultures in tissue engineering. The contactless magnetic manipulation approach is a rapid, simple, and cost-effective method that requires paramagnetic agents [1-3] or magnetic materials [4]. Here, to obtain patterned 3D cellular structures a new alginate-based bio-ink formulation was developed to fabricate 3D cellular structures using contactless magnetic manipulation. 3D cardiac model was obtained by patterning rat cardiomyocytes. Cellular and extracellular components and cardiac-specific markers of patterned 3D cellular structures were indicated successfully. Drug response of patterned 3D cellular structures was evaluated by applying doxorubicin. Patterned 3D cardiac cellular structures showed significantly different drug response compared to conventional 2D cell cultures. In conclusion, this technique provides an easy, efficient, and low-cost methodology to fabricate 3D cardiac structures for drug screening.Article Citation - WoS: 7Citation - Scopus: 8Bioinspired Multi-Layer Biopolymer-Based Dental Implant Coating for Enhanced Osseointegration(Wiley, 2023) Üzülmez, Betül; Demirsoy, Zeynep; Can, Özge; Gülseren, GulcihanThe major drawbacks of metal-based implants are weak osseointegration and post-operational infections. These limitations restrict the long-term use of implants that may cause severe tissue damage and replacement of the implant. Recent strategies to enhance the osseointegration process require an elaborate fabrication process and suffer from post-operative complications. To address the current challenges taking inspiration from the extracellular matrix (ECM), the current study is designed to establish enhanced osseointegration with lowered risk of infection. Natural biopolymer pectin, peptide amphiphiles, and enzyme-mimicking fullerene moieties are governed to present an ECM-like environment around the implant surfaces. This multifunctional approach promotes osseointegration via inducing biomineralization and osteoblast differentiation. Application of the biopolymer-based composite to the metal surfaces significantly enhances cellular attachment, supports the mineral deposition, and upregulates osteoblast-specific gene expression. In addition to the osteoinductive properties of the constructed layers, the inherent antimicrobial properties of multilayer coating are also used to prevent infection possibility. The reported biopolymer-artificial enzyme composite demonstrates antimicrobial activity against Escherichia coli and Bacillus subtilis as a multifunctional surface coating.Article Citation - WoS: 7Citation - Scopus: 7Potent Telomerase Activators From a Novel Sapogenin Via Biotransformation Utilizing Camarosporium Laburnicola, an Endophytic Fungus(BioMed Central Ltd., 2023) Küçüksolak, Melis; Yılmaz, Sinem; Ballar Kırmızıbayrak, Petek; Bedir, ErdalBACKGROUND: Cycloartane-type triterpenoids possess important biological activities, including immunostimulant, wound healing, and telomerase activation. Biotransformation is one of the derivatization strategies of natural products to improve their bioactivities. Endophytic fungi have attracted attention in biotransformation studies because of their ability to perform modifications in complex structures with a high degree of stereospecificity. RESULTS: This study focuses on biotransformation studies on cyclocephagenol (1), a novel cycloartane-type sapogenin from Astragalus species, and its 12-hydroxy derivatives (2 and 3) to obtain new telomerase activators. Since the hTERT protein levels of cyclocephagenol (1) and its 12-hydroxy derivatives (2 and 3) on HEKn cells were found to be notable, biotransformation studies were carried out on cyclocephagenol and its 12-hydroxy derivatives using Camarosporium laburnicola, an endophytic fungus isolated from Astragalus angustifolius. Later, immunoblotting and PCR-based ELISA assay were used to screen starting compounds and biotransformation products for their effects on hTERT protein levels and telomerase activation. All compounds showed improved telomerase activation compared to the control group. CONCLUSIONS: As a result of biotransformation studies, seven new metabolites were obtained and characterized, verifying the potential of C. laburnicola as a biocatalyst. Additionally, the bioactivity results showed that this endophytic biocatalyst is unique in transforming the metabolites of its host to afford potent telomerase activators. © 2023. The Author(s).Conference Object Investigation of the Cytotoxicity of Bioceramic Nanoparticles on Saos-2 Cells by an Alternative Method(Elsevier Ireland Ltd, 2022) Tomak, Aysel; Önder, A. C.; Öksel Karakuş, CeydaReview Citation - WoS: 23Citation - Scopus: 24Microfluidic-Based Technologies for Diagnosis, Prevention, and Treatment of Covid-19: Recent Advances and Future Directions(Springer, 2023) Tarım, Ergün Alperay; Anıl İnevi, Müge; Özkan, İlayda; Keçili, Seren; Bilgi, Eyüp; Başlar, Muhammet Semih; Özçivici, Engin; Öksel Karakuş, Ceyda; Tekin, Hüseyin CumhurThe COVID-19 pandemic has posed significant challenges to existing healthcare systems around the world. The urgent need for the development of diagnostic and therapeutic strategies for COVID-19 has boomed the demand for new technologies that can improve current healthcare approaches, moving towards more advanced, digitalized, personalized, and patient-oriented systems. Microfluidic-based technologies involve the miniaturization of large-scale devices and laboratory-based procedures, enabling complex chemical and biological operations that are conventionally performed at the macro-scale to be carried out on the microscale or less. The advantages microfluidic systems offer such as rapid, low-cost, accurate, and on-site solutions make these tools extremely useful and effective in the fight against COVID-19. In particular, microfluidic-assisted systems are of great interest in different COVID-19-related domains, varying from direct and indirect detection of COVID-19 infections to drug and vaccine discovery and their targeted delivery. Here, we review recent advances in the use of microfluidic platforms to diagnose, treat or prevent COVID-19. We start by summarizing recent microfluidic-based diagnostic solutions applicable to COVID-19. We then highlight the key roles microfluidics play in developing COVID-19 vaccines and testing how vaccine candidates perform, with a focus on RNA-delivery technologies and nano-carriers. Next, microfluidic-based efforts devoted to assessing the efficacy of potential COVID-19 drugs, either repurposed or new, and their targeted delivery to infected sites are summarized. We conclude by providing future perspectives and research directions that are critical to effectively prevent or respond to future pandemics.