Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
18 results
Search Results
Article Citation - WoS: 17Citation - Scopus: 15Antiproliferative and Apoptotic Effects of Olive Leaf Extract Microcapsules on Mcf-7 and A549 Cancer Cells(American Chemical Society, 2023) Bal, Yıldız; Sürmeli, Yusuf; Şanlı Mohamed, GülşahAlginate microcapsules are a talented means for the delivery of broad curative biomacromolecules. In this study, we immobilized olive leaf extract (OLE) by calcium alginate (CA) and chitosan-coated CA (CCA) and characterized the OLE-loaded CA and CCA. The cytotoxic effect, the cell cycle arrest, and the apoptotic effect of OLE and its microcapsules were investigated against breast adenocarcinoma (MCF-7) and lung carcinoma (A549). As a result, the loading capacity of OLE-CA and OLE-CCA was found to be 80 and 99%, respectively, in optimal conditions. Also, OLE-CA and OLE-CCA were characterized by unique FTIR peaks and morphological display relative to the empty CCA microcapsules. The cytotoxicity analysis showed that the IC50 values of OLE-CA and OLE-CCA were determined to be 312 and 0.94 μg mL-1 against A549, respectively, whereas these were found to be 865.4 and 425.5 μg mL-1 for MCF-7 cells. On the other hand, the OLE microcapsules did not possess in any concentration of cytotoxic influence on the BEAS 2B healthy cell line. Also, the exposure of OLE-CCA to MCF-7 and A549 resulted in the arrest of more MCF-7 and A549 cells at the G0/G1 phase compared to the OLE. A549 and MCF-7 cells were predominantly found in the late apoptosis phase and necrosis phase, respectively. Optical microscopy images confirmed that OLE microcapsules were more effective against MCF-7 and A549 than free OLE. The present work suggested that the OLE microcapsules might be administered as nutrition supplements for cancer therapy. © 2023 The Authors. Published by American Chemical Society.Article Citation - WoS: 2Citation - Scopus: 6Immobilization of Olive Leaf Extract With Chitosan Nanoparticles as an Adjunct To Enhance Cytotoxicity(American Chemical Society, 2023) Özdamar, Burcu; Sürmeli, Yusuf; Şanlı Mohamed, GülşahWe immobilized the olive leaf extract (OLE) with chitosannanoparticles(CNPs) by optimizing the effect of various immobilization conditions,and OLE-loaded CNPs (OLE-CNPs) were then elaborately characterizedphysicochemically by scanning electron microscopy (SEM), Fourier transforminfrared (FT-IR) spectroscopy, dynamic light scattering (DLS), andatomic force microscopy (AFM). Under optimal conditions, CNPs wereable to accommodate the OLE with a loading capacity of 97.5%. Theresulting OLE-CNPs had a spherical morphology, and their average diameterwas approximately 100 nm. The cytotoxic influence, cell cycle distribution,and apoptosis stage of OLE and OLE-CNPs were analyzed on lung carcinoma(A549) and breast adenocarcinoma (MCF-7) cell lines. In an in vitrocytotoxic assay, IC50 values of OLE-CNPs were determinedto be 540 & mu;g/mL for A549 and 810 & mu;g/mL for MCF-7. Thetreatment of both A549 and MCF-7 with OLE-CNPs caused the highestcell arrest in G0/G1 in a dose-independent manner. OLE-CNPs affectedcell cycle distribution in a manner different from free OLE treatmentin both cancer cells. A549 and MCF-7 cells were predominantly foundin the late apoptosis and necrosis phases, respectively, upon treatmentof 1000 & mu;M OLE-CNPs. Our results suggest that CNPs enhance theutility of OLEs as nutraceuticals in cancer and that OLE-CNPs canbe utilized as an adjunct to cancer therapy.Article Citation - WoS: 27Citation - Scopus: 27In Vivo Bone Regeneration Capacity of Multiscale Porous Polycaprolactone-Based High Internal Phase Emulsion (polyhipe) Scaffolds in a Rat Calvarial Defect Model(American Chemical Society, 2023) Aldemir Dikici, Betül; Chen, Min-Chia; Dikici, Serkan; Chiu, Hsien-Chung; Claeyssens, FrederikGlobally, one of the most common tissue transplantationproceduresis bone grafting. Lately, we have reported the development of polymerizedhigh internal phase emulsions (PolyHIPEs) made of photocurable polycaprolactone(4PCLMA) and shown their potential to be used as bone tissue engineeringscaffolds in vitro. However, it is essential to evaluatethe in vivo performance of these scaffolds to investigatetheir potential in a clinically more relevant manner. Therefore, inthis study, we aimed to compare in vivo performancesof macroporous (fabricated using stereolithography), microporous (fabricatedusing emulsion templating), and multiscale porous (fabricated usingemulsion templating and perforation) scaffolds made of 4PCLMA. Also,3D-printed macroporous scaffolds (fabricated using fused depositionmodeling) made of thermoplastic polycaprolactone were used as a control.Scaffolds were implanted into a critical-sized calvarial defect, animalswere sacrificed 4 or 8 weeks after implantation, and the new boneformation was assessed by micro-computed tomography, dental radiography,and histology. Multiscale porous scaffolds that include both micro-and macropores resulted in higher bone regeneration in the defectarea compared to only macroporous or only microporous scaffolds. Whenone-grade porous scaffolds were compared, microporous scaffolds showedbetter performance than macroporous scaffolds in terms of mineralizedbone volume and tissue regeneration. Micro-CT results revealed thatwhile bone volume/tissue volume (Bv/Tv) values were 8 and 17% at weeks4 and 8 for macroporous scaffolds, they were significantly higherfor microporous scaffolds, with values of 26 and 33%, respectively.Taken together, the results reported in this study showed the potentialapplication of multiscale PolyHIPE scaffolds, in particular, as apromising material for bone regeneration.Review Citation - WoS: 52Citation - Scopus: 56Spheroid engineering in microfluidic devices(American Chemical Society, 2023) Tevlek, Atakan; Keçili, Seren; Özçelik, Özge Solmaz; Kulah, Haluk; Tekin, H. CumhurTwo-dimensional (2D) cell culture techniques are commonly employed to investigate biophysical and biochemical cellular responses. However, these culture methods, having monolayer cells, lack cell-cell and cell-extracellular matrix interactions, mimicking the cell microenvironment and multicellular organization. Three-dimensional (3D) cell culture methods enable equal transportation of nutrients, gas, and growth factors among cells and their microenvironment. Therefore, 3D cultures show similar cell proliferation, apoptosis, and differentiation properties to in vivo. A spheroid is defined as self-assembled 3D cell aggregates, and it closely mimics a cell microenvironment in vitro thanks to cell-cell/matrix interactions, which enables its use in several important applications in medical and clinical research. To fabricate a spheroid, conventional methods such as liquid overlay, hanging drop, and so forth are available. However, these labor-intensive methods result in low-throughput fabrication and uncontrollable spheroid sizes. On the other hand, microfluidic methods enable inexpensive and rapid fabrication of spheroids with high precision. Furthermore, fabricated spheroids can also be cultured in microfluidic devices for controllable cell perfusion, simulation of fluid shear effects, and mimicking of the microenvironment-like in vivo conditions. This review focuses on recent microfluidic spheroid fabrication techniques and also organ-on-a-chip applications of spheroids, which are used in different disease modeling and drug development studies.Article Citation - WoS: 10Citation - Scopus: 14An Electromechanical Lab-On Platform for Colorimetric Detection of Serum Creatinine(American Chemical Society, 2022) Karakuzu, Betül; Tarım, Ergün Alperay; Öksüz, Cemre; Tekin, Hüseyin CumhurChronic kidney disease (CKD) is a high-cost disease that affects approximately one in ten people globally, progresses rapidly, results in kidney failure or dialysis, and triggers other diseases. Although clinically used serum creatinine tests are used to evaluate kidney functions, these tests are not suitable for frequent and regular control at-home settings that obstruct the regular monitoring of kidney functions, improving CKD management with early intervention. This study introduced a new electromechanical lab-on-a-chip platform for point-of-care detection of serum creatinine levels using colorimetric enzyme-linked immunosorbent assay (ELISA). The platform was composed of a chip containing microreservoirs, a stirring bar coated with creatinine-specific antibodies, and a phone to detect color generated via ELISA protocols to evaluate creatinine levels. An electromechanical system was used to move the stirring bar to different microreservoirs and stir it inside them to capture and detect serum creatinine in the sample. The presented platform allowed automated analysis of creatinine in ~50 min down to ~1 and ~2 mg/dL in phosphate-buffered saline (PBS) and fetal bovine serum (FBS), respectively. Phone camera measurements in hue, saturation, value (HSV) space showed sensitive analysis compared to a benchtop spectrophotometer that could allow low-cost analysis at point-of-care.Article Citation - WoS: 12Citation - Scopus: 12Sema6d Differentially Regulates Proliferation, Migration, and Invasion of Breast Cell Lines(American Chemical Society, 2022) Günyüz, Zehra Elif; Sahi İlhan, Ece; Küçükköse, Cansu; İpekgil, Doğaç; Tok, Güneş; Meşe, Gülistan; Özçivici, Engin; Yalçın Özuysal, ÖzdenSemaphorin 6D (SEMA6D), a member of the class 6 semaphorin family, is a membrane-associated protein that plays a key role in the development of cardiac and neural tissues. A growing body of evidence suggests that SEMA6D is also involved in tumorigenesis. In breast cancer, high SEMA6D levels are correlated with better survival rates. However, very little is known about the functional significance of SEMA6D in breast tumorigenesis. In the present study, we aimed to investigate the effects of SEMA6D expression on the normal breast cell line MCF10A and the breast cancer cell lines MCF7 and MDA MB 231. We demonstrated that SEMA6D expression increases the proliferation of MCF10A cells, whereas the opposite effect was observed in MCF7 cells. SEMA6D expression induced anchorage-independent growth in both cancer cell lines. Furthermore, migration of MCF10A and MCF7 cells and invasion of MDA MB 231 cells were elevated in response to SEMA6D overexpression. Accordingly, the genes related to epithelial-mesenchymal transition (EMT) were altered by SEMA6D expression in MCF10A and MCF7 cell lines. Finally, we provided evidence that SEMA6D levels were associated with the expression of the cell cycle, EMT, and Notch signaling pathway-related genes in breast cancer patients' data. We showed for the first time that SEMA6D overexpression has cell-specific effects on the proliferation, migration, and invasion of normal and cancer breast cell lines, which agrees with the gene expression data of clinical samples. This study lays the groundwork for future research into understanding the functional importance of SEMA6D in breast cancerArticle Citation - WoS: 24Citation - Scopus: 30Hologlev: a Hybrid Magnetic Levitation Platform Integrated With Lensless Holographic Microscopy for Density-Based Cell Analysis(American Chemical Society, 2021) Delikoyun, Kerem; Yaman, Sena; Yılmaz, Esra; Sarıgil, Öykü; Anıl İnevi, Müge; Telli, Kübra; Yalçın Özuysal, ÖzdenIn clinical practice, a variety of diagnostic applications require the identification of target cells. Density has been used as a physical marker to distinguish cell populations since metabolic activities could alter the cell densities. Magnetic levitation offers great promise for separating cells at the single cell level within heterogeneous populations with respect to cell densities. Traditional magnetic levitation platforms need bulky and precise optical microscopes to visualize levitated cells. Moreover, the evaluation process of cell densities is cumbersome, which also requires trained personnel for operation. In this work, we introduce a device (HologLev) as a fusion of the magnetic levitation principle and lensless digital inline holographic microscopy (LDIHM). LDIHM provides ease of use by getting rid of bulky and expensive optics. By placing an imaging sensor just beneath the microcapillary channel without any lenses, recorded holograms are processed for determining cell densities through a fully automated digital image processing scheme. The device costs less than $100 and has a compact design that can fit into a pocket. We perform viability tests on the device by levitating three different cell lines (MDA-MB-231, U937, D1 ORL UVA) and comparing them against their dead correspondents. We also tested the differentiation of mouse osteoblastic (7F2) cells by monitoring characteristic variations in their density. Last, the response of MDA-MB-231 cancer cells to a chemotherapy drug was demonstrated in our platform. HologLev provides cost-effective, label-free, fully automated cell analysis in a compact design that could be highly desirable for laboratory and point-of-care testing applications.Article Citation - WoS: 16Citation - Scopus: 13Fabrication of Tunable 3d Cellular Structures in High Volume Using Magnetic Levitation Guided Assembly(American Chemical Society, 2021) Onbas, Rabia; Arslan Yıldız, AhuTunable and reproducible size with high circularity is an important limitation to obtain three-dimensional (3D) cellular structures and spheroids in scaffold free tissue engineering approaches. Here, we present a facile methodology based on magnetic levitation (MagLev) to fabricate 3D cellular structures rapidly and easily in high-volume and low magnetic field. In this study, 3D cellular structures were fabricated using magnetic levitation directed assembly where cells are suspended and self-assembled by contactless magnetic manipulation in the presence of a paramagnetic agent. The effect of cell seeding density, culture time, and paramagnetic agent concentration on the formation of 3D cellular structures was evaluated for NIH/3T3 mouse fibroblast cells. In addition, magnetic levitation guided cellular assembly and 3D tumor spheroid formation was examined for five different cancer cell lines: MCF7 (human epithelial breast adenocarcinoma), MDA-MB-231 (human epithelial breast adenocarcinoma), SHSYSY (human bone-marrow neuroblastoma), PC-12 (rat adrenal gland pheochromocytoma), and HeLa (human epithelial cervix adenocarcinoma). Moreover, formation of a 3D coculture model was successfully observed by using MDA-MB-231 dsRED and MDA-MB-231 GFP cells. Taken together, these results indicate that the developed MagLev setup provides an easy and efficient way to fabricate 3D cellular structures and may be a feasible alternative to conventional methodologies for cellular/multicellular studies.Article Citation - WoS: 13Citation - Scopus: 13Solid-Binding Peptide-Guided Spatially Directed Immobilization of Kinetically Matched Enzyme Cascades in Membrane Nanoreactors(American Chemical Society, 2021) Yücesoy, Deniz Tanıl; Akkineni, Susrut; Tamerler, Candan; Hinds, Bruce J.; Sarıkaya, MehmetBiocatalysis is a useful strategy for sustainable green synthesis of fine chemicals due to its high catalytic rate, reaction specificity, and operation under ambient conditions. Addressable immobilization of enzymes onto solid supports for one-pot multistep biocatalysis, however, remains a major challenge. In natural pathways, enzymes are spatially coupled to prevent side reactions, eradicate inhibitory products, and channel metabolites sequentially from one enzyme to another. Construction of a modular immobilization platform enabling spatially directed assembly of multiple biocatalysts would, therefore, not only allow the development of high-efficiency bioreactors but also provide novel synthetic routes for chemical synthesis. In this study, we developed a modular cascade flow reactor using a generalizable solid-binding peptide-directed immobilization strategy that allows selective immobilization of fusion enzymes on anodic aluminum oxide (AAO) monoliths with high positional precision. Here, the lactate dehydrogenase and formate dehydrogenase enzymes were fused with substrate-specific peptides to facilitate their self-immobilization through the membrane channels in cascade geometry. Using this cascade model, two-step biocatalytic production of l-lactate is demonstrated with concomitant regeneration of soluble nicotinamide adenine dinucleotide (NADH). Both fusion enzymes retained their catalytic activity upon immobilization, suggesting their optimal display on the support surface. The 85% cascading reaction efficiency was achieved at a flow rate that kinetically matches the residence time of the slowest enzyme. In addition, 84% of initial catalytic activity was preserved after 10 days of continuous operation at room temperature. The peptide-directed modular approach described herein is a highly effective strategy to control surface orientation, spatial localization, and loading of multiple enzymes on solid supports. The implications of this work provide insight for the single-step construction of high-power cascadic devices by enabling co-expression, purification, and immobilization of a variety of engineered fusion enzymes on patterned surfaces. © 2021 The Authors. Published by American Chemical Society.Article Citation - WoS: 23Citation - Scopus: 30Magnetic Susceptibility-Based Protein Detection Using Magnetic Levitation(American Chemical Society, 2020) Yaman, Sena; Tekin, Hüseyin CumhurMagnetic levitation, which is a magnetic phenomenon of levitating particles suspended in a paramagnetic liquid under a nonuniform magnetic field, is a powerful tool for determining densities and magnetic properties of micro- and nanoparticles. The levitation height of particles in the magnetic field depends on the magnetic susceptibility and density difference between the object and the surrounding liquid. Here, we developed a magnetic susceptibility-based protein detection scheme in a low-cost and miniaturized magnetic levitation setup consisting of two opposing magnets to create a gradient of a magnetic field, a glass capillary channel to retain the sample, and two side mirrors to monitor inside the channel. The method includes the use of polymeric microspheres as mobile assay surfaces and magnetic nanoparticles as labels. The assay was realized by capturing the target protein to the polymer microspheres. Then, magnetic nanoparticles were attached onto the resulting microsphere-protein complex, creating a significant difference in the magnetic properties of polymer microspheres compared to those without protein. The change in the magnetic properties caused a change in the levitation height of the microspheres. The levitation heights and their distribution were then correlated to the amount of target proteins. The method enabled a detection limit of similar to 110 fg/mL biotinylated bovine serum albumin in serum. With the sandwich immunoassay developed for mouse immunoglobulin G, detection limits of 1.5 ng/mL and >10 ng/mL were achieved in buffer and serum, respectively. This approach sensed the minute changes in the volume magnetic susceptibility of the microspheres with a resolution of 4.2 x 10(-8) per 1 mu m levitation height change.