Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
40 results
Search Results
Review Citation - WoS: 17Citation - Scopus: 16Engineering Periodontal Tissue Interfaces Using Multiphasic Scaffolds and Membranes for Guided Bone and Tissue Regeneration(Elsevier, 2024) Özkendir, Özge; Karaca, İlayda; Çullu, Selin; Yaşar, Hüsniye Nur,; Erdoğan, Oğulcan; Dikici, Serkan; Dikici, Betul AldemirPeriodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.Article Citation - WoS: 18Citation - Scopus: 17Modifying Pickering Polymerized High Internal Phase Emulsion Morphology by Adjusting Particle Hydrophilicity(Elsevier, 2024) Durgut, Enes; Zhou, Muchu; Dikici, Betuel Aldemir; Foudazi, Reza; Claeyssens, FrederikThis study investigates the use of submicron polymeric particles with varying crosslinking densities as the sole stabilizer for producing Polymerized High Internal Phase Emulsions (PolyHIPE). We establish a direct correlation between the crosslinking density and the hydrophilicity of the polymer particles. The hydrophilicity of these particles significantly influences the morphology and rheology of HIPEs. These differences manifest as various morphological variations in the resulting PolyHIPE templates. It was discovered that by increasing the crosslinker weight percentage in the particles from 0 % to 100 %, PolyHIPEs with semi-open, open, and closed porous structures can be obtained. Furthermore, non-crosslinked particles were observed to dissolve in the continuous phase, acting as macromolecular surfactants that generate small pores akin to surfactant-stabilized structures in PolyHIPE. These findings offer fresh insights into the relationship between particle localization at the interface, HIPE rheology, and the formation of pore throats in Pickering PolyHIPEs, leading to the creation of either closed or open porous networks. Additionally, interfacial rheological results demonstrate that particles synthesized with varying monomer-to-crosslinker ratios exhibit different interfacial elasticities, which are linked to PolyHIPE morphology.Article Citation - WoS: 6Citation - Scopus: 6Microbial Desalination Cell Treated Spent Geothermal Brine as a Nutrient Medium in Hydroponic Lettuce Cultivation: Health Risk Assessment(Elsevier, 2024) Goren, A. Y.; Eskisoy, D. N.; Genisoglu, S.; Okten, H. E.The scarcity and contamination of freshwater resources are extremely critical issues today, and the expansion of water reuse has been considered as an option to decrease its impact. Therefore, the reuse of microbial desalination (MDC)-treated spent geothermal brine for agricultural purposes arises as a good solution to prevent water contamination and provide sustainable water usage. In this study, the potential of treated spent geothermal water from MDC system as a nutrient solution for the hydroponic cultivation of lettuce was evaluated. The effects of different water samples (Hoagland solution (R1) as a control, MDC-treated water (R2), 1:1, v/v mixture of MDCtreated water and Hoagland solution (R3), 4:1, v/v mixture of MDC-treated water and Hoagland solution (R4), and tap water (R5)) on lettuce growth were considered. The application of R3 and R4 samples for hydroponic lettuce cultivation was promising since the lettuce plants uptake sufficient nutrients for their growth and productivity with low toxic metal concentrations. In addition, the chlorophyll-a, chlorophyll-b, and carotene contents of lettuce were in the range of 1.045-2.391 mg/g, 0.761-1.986 mg/g, and 0.296-0.423 mg/g in different water samples, respectively. The content of chlorophyll-a was highest in R1 (2.391 mg/g), followed by R3 (2.371 mg/g). Furthermore, the health risk assessment of heavy metal accumulations in the lettuce plants cultivated in the various water samples was determined. Results showed that heavy metal exposure via lettuce consumption is unlikely to suffer noticeable adverse health problems with values below the permissible limit value.Article Citation - WoS: 4Citation - Scopus: 4Optimizing the Dispersion of Calcium Phosphate Nanoparticles for Cellular Studies Using Statistical Design of Experiments(Elsevier, 2023) Önder, Anıl Can; Tomak, Aysel; Öksel Karakuş, CeydaThe in vitro experimentation of ceramic nanoparticles often requires their dispersion in liquid media without causing particle clumps or deteriorating sample integrity. However, the dispersion of nanoparticles using the available protocols rarely leads to stable and uniform dispersions which, in turn, raises concerns about the validity, repeatability and comparability of the findings observed in vitro. Moreover, the ability to control the final dispersion quality of ceramic nanoparticles is an essential step to obtaining optimized nanoceramic materials with desired functionality and to enhancing their performance in subsequent applications. While the need to have a comprehensive guideline for the dispersion of nanoparticles has led to several published documents and protocols, the dispersion methodology of ceramic nanoparticles and the relative contribution of the experimental parameters to the quality of resulting dispersion are still not clear. Here, we employed the statistical design of experiment (DoE) approach to systematically assess the magnitude and source of variation in dispersion quality of two different ceramic nanoparticles, hydroxyapatite and tricalcium phosphate. Using the first-order Plackett-Burman Design (PBD), nanoparticle concentration, pH and the presence of an additive were identified as the most critical factors influencing the resulting hydrodynamic size and zeta potential of the ceramic nanoparticles. Optimization using a second-order Central Composite Design (CCD) yielded a set of quadratic regression equations that were used to predict the hydrodynamic size or zeta potential of ceramic nanoparticles with high accuracy (R2, 0.88–0.92). The results of PBD screening and CCD optimization experiments were employed to prepare nanoparticle dispersions of different quality, which were then used to compare the effect of aggregation on the viability of human osteosarcoma (SaOS-2) cells. Overall, the results of this study provided insight into the role that various experimental parameters play in the colloidal stability and dispersion of ceramic nanoparticles. © 2023Article Citation - WoS: 7Citation - Scopus: 7Neo-Clerodanes From Teucrium Divaricatum Subsp. Divaricatum and Their Biological Activity Assessment(Elsevier, 2023) Aydoğan, Fadime; Ali, Zülfiqar; Zülfiqar, Fazila; Karaalp, Canan; Khan, Ikhlas A.; Bedir, ErdalFifteen neo-clerodane diterpenoids (1–15), including two undescribed glycosides, teudivaricosides A (1) and B (2), together with a known iridoid glycoside (16) and a phenylpropanoid glycoside (17) from the whole plant of Teucrium divaricatum subsp. divaricatum were isolated. Their structures were determined by spectral data analysis including 1D and 2D NMR and HRESIMS. Neo-clerodane diterpenoids were evaluated for their anti-inflammatory, and antimicrobial activities. None of them showed significant antimicrobial activity against various bacterial and fungal strains (up to 20 µg/mL). All tested compounds were inactive up to the highest tested concentration of 50 µM on iNOS inhibitory activity.Article Citation - WoS: 15Citation - Scopus: 16Electromechanical Rt-Lamp Device for Portable Sars-Cov Detection(Elsevier, 2023) Tarım, Ergün Alperay; Öksüz, Cemre; Karakuzu, Betül; Appak, Özgür; Sayıner, Ayça Arzu; Tekin, Hüseyin CumhurRapid point-of-care tests for infectious diseases are essential, especially in pandemic conditions. We have developed a point-of-care electromechanical device to detect SARS-CoV-2 viral RNA using the reverse-transcription loop-mediated isothermal amplification (RT-LAMP) principle. The developed device can detect SARS-CoV-2 viral RNA down to 103 copies/mL and from a low amount of sample volumes (2 μL) in less than an hour of standalone operation without the need for professional labor and equipment. Integrated Peltier elements in the device keep the sample at a constant temperature, and an integrated camera allows automated monitoring of LAMP reaction in a stirring sample by using colorimetric analysis of unfocused sample images in the hue/saturation/value color space. This palm-fitting, portable and low-cost device does not require a fully focused sample image for analysis, and the operation could be stopped automatically through image analysis when the positive test results are obtained. Hence, viral infections can be detected with the portable device produced without the need for long, expensive, and labor-intensive tests and equipment, which can make the viral tests disseminated at the point-of-care.Article Citation - WoS: 6Citation - Scopus: 7Designing Robust Xylan/Chitosan Composite Shells Around Drug-Loaded Msns: Stability in Upper Git and Degradation in the Colon Microbiota(Elsevier, 2023) Zeybek, Nüket; Büyükkileci, Ali Oğuz; Güleç, Şükrü; Polat, Mehmet; Polat, Hürriyetong residence times, near-neutral pH values, and release triggered by the enzymatic action of the resident microbiota offer unique opportunities for improved drug delivery in the colon. The fact that a delivery agent must also pass through the complete GI tract without degradation presents a challenge due to widely changing pH conditions. In this study, a promising colon-targeted drug delivery system was composed of a xylan/chitosan composite shell formed on curcumin-loaded mesoporous silica nanoparticles (MSNs). A novel synthesis approach was employed to facilitate precipitation of negatively charged xylan on negatively charged MSNs by concurrent chitosan polymerization. Curcumin-loaded xylan/chitosan-coated MSNs (C-MSNs) were determined to contain nearly 42% xylan by the inclusion of chitosan in a one-to-one ratio with xylan. The xylan/chitosan composite shell demonstrated excellent stability in the acidic upper GI tract. The hydrolysis of glycosidic bonds by resident microbiota was the triggering mechanism for xylan degradation and curcumin release in the colon. The presence of xylan has the further benefit of increasing the number of beneficial bacteria and improving short-chain fatty acid production for improved colon health.Conference Object Computational Nanotoxicology: a Case Study With Silver and Zinc Nanomaterials(Elsevier, 2022) Bilgi, Eyüp; Öksel Karakuş, CeydaNanomaterials (NMs) have been the focus of basic and applied research for more than two decades. According to the updated consumer materials inventory, over 1800 commercial NMs have taken their place in the market, 42% of which are in health and wellness category1. The widespread use of NMs in health-related products made not only the human exposure to the (residues of) NMs inevitable but also the long-recognized concerns over their safety a priority. Despite this pressing need, more than 70% of commercially available nano-containing products do not include sufficient information about their physicochemical and/or toxicological characteristics.Conference Object Citation - WoS: 1Green Synthesis of Nanostructured Bioactive Glass for Dental Applications(Elsevier, 2022) Tüncer, Melisa; Yücesoy, Deniz Tanıl; Öksel Karakuş, CeydaCalcium sodium phosphosilicate (known as bioactive glass) is a biomaterial commonly used in dental care products and bone tissue engineering applications due to biocompatibility, bone-forming and dentin sensitivity reduction capability. Bioactive 45S5 glass, so-called NovaMin, comprises of 45% SiO2, 24.5% Na2O, 24.5% CaO, and 6% P2O5 (wt%). It is traditionally synthesized by wet chemical methods such as melt-quenching and sol-gel which requires high temperature heating and the use of a strong acid catalyst, which brings into the question of the possibility of introducing toxic acid residues into the final product. Therefore, there is a clear need to develop environmental-friendly bioactive glass synthesis methods or to modify existing ones in a way to uplift their environmental friendliness.Conference Object Comparative Study of the Cytotoxicity of Hydroxyapatite, Tricalcium Phosphate and Calcium Phosphate Nanomaterials on Panc-1 and Hek293 Cell Line(Elsevier, 2022) Çeşmeli, Selin; Öksel Karakuş, CeydaCalcium phosphate-based bioceramic nanoparticles have been actively used in a range of therapeutic applications. Although they are mostly considered as biocompatible materials, the circulation of nanoparticles in the bloodstream raise further questions as to what degree of cellular damage they are capable of causing once carried out to vital organs such as kidney and pancreas. Therefore, there is a clear need to explore potential cellular damage induced by commercially used bioceramic nanoparticles such as hydroxyapatite (HAp), tricalcium phosphate (TCP) and calcium phosphate (CaP).