Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
29 results
Search Results
Review Citation - WoS: 17Citation - Scopus: 16Engineering Periodontal Tissue Interfaces Using Multiphasic Scaffolds and Membranes for Guided Bone and Tissue Regeneration(Elsevier, 2024) Özkendir, Özge; Karaca, İlayda; Çullu, Selin; Yaşar, Hüsniye Nur,; Erdoğan, Oğulcan; Dikici, Serkan; Dikici, Betul AldemirPeriodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.Review Citation - WoS: 30Citation - Scopus: 33Molecular Separation by Using Active and Passive Microfluidic Chip Designs: a Comprehensive Review(Wiley, 2023) Ebrahimi, Aliakbar; Didarian, Reza; Shih, Chih-Hsin; Nasseri, Behzad; Ethan Li, Yi-Chen; Shih, Steven; İçöz, Kutay; Tarım, Ergün Alperay; Akpek, Ali; Çeçen, Berivan; Bal Öztürk, Ayça; Güleç, Kadri; Tarım, Burcu Sırma; Tekin, Hüseyin CumhurSeparation and identification of molecules and biomolecules such as nucleic acids, proteins, and polysaccharides from complex fluids are known to be important due to unmet needs in various applications. Generally, many different separation techniques, including chromatography, electrophoresis, and magnetophoresis, have been developed to identify the target molecules precisely. However, these techniques are expensive and time consuming. “Lab-on-a-chip” systems with low cost per device, quick analysis capabilities, and minimal sample consumption seem to be ideal candidates for separating particles, cells, blood samples, and molecules. From this perspective, different microfluidic-based techniques have been extensively developed in the past two decades to separate samples with different origins. In this review, “lab-on-a-chip” methods by passive, active, and hybrid approaches for the separation of biomolecules developed in the past decade are comprehensively discussed. Due to the wide variety in the field, it will be impossible to cover every facet of the subject. Therefore, this review paper covers passive and active methods generally used for biomolecule separation. Then, an investigation of the combined sophisticated methods is highlighted. The spotlight also will be shined on the elegance of separation successes in recent years, and the remainder of the article explores how these permit the development of novel techniques. © 2023 The Authors. Advanced Materials Interfaces published by Wiley-VCH GmbH.Article Citation - WoS: 17Citation - Scopus: 15Antiproliferative and Apoptotic Effects of Olive Leaf Extract Microcapsules on Mcf-7 and A549 Cancer Cells(American Chemical Society, 2023) Bal, Yıldız; Sürmeli, Yusuf; Şanlı Mohamed, GülşahAlginate microcapsules are a talented means for the delivery of broad curative biomacromolecules. In this study, we immobilized olive leaf extract (OLE) by calcium alginate (CA) and chitosan-coated CA (CCA) and characterized the OLE-loaded CA and CCA. The cytotoxic effect, the cell cycle arrest, and the apoptotic effect of OLE and its microcapsules were investigated against breast adenocarcinoma (MCF-7) and lung carcinoma (A549). As a result, the loading capacity of OLE-CA and OLE-CCA was found to be 80 and 99%, respectively, in optimal conditions. Also, OLE-CA and OLE-CCA were characterized by unique FTIR peaks and morphological display relative to the empty CCA microcapsules. The cytotoxicity analysis showed that the IC50 values of OLE-CA and OLE-CCA were determined to be 312 and 0.94 μg mL-1 against A549, respectively, whereas these were found to be 865.4 and 425.5 μg mL-1 for MCF-7 cells. On the other hand, the OLE microcapsules did not possess in any concentration of cytotoxic influence on the BEAS 2B healthy cell line. Also, the exposure of OLE-CCA to MCF-7 and A549 resulted in the arrest of more MCF-7 and A549 cells at the G0/G1 phase compared to the OLE. A549 and MCF-7 cells were predominantly found in the late apoptosis phase and necrosis phase, respectively. Optical microscopy images confirmed that OLE microcapsules were more effective against MCF-7 and A549 than free OLE. The present work suggested that the OLE microcapsules might be administered as nutrition supplements for cancer therapy. © 2023 The Authors. Published by American Chemical Society.Article Citation - WoS: 2Citation - Scopus: 6Immobilization of Olive Leaf Extract With Chitosan Nanoparticles as an Adjunct To Enhance Cytotoxicity(American Chemical Society, 2023) Özdamar, Burcu; Sürmeli, Yusuf; Şanlı Mohamed, GülşahWe immobilized the olive leaf extract (OLE) with chitosannanoparticles(CNPs) by optimizing the effect of various immobilization conditions,and OLE-loaded CNPs (OLE-CNPs) were then elaborately characterizedphysicochemically by scanning electron microscopy (SEM), Fourier transforminfrared (FT-IR) spectroscopy, dynamic light scattering (DLS), andatomic force microscopy (AFM). Under optimal conditions, CNPs wereable to accommodate the OLE with a loading capacity of 97.5%. Theresulting OLE-CNPs had a spherical morphology, and their average diameterwas approximately 100 nm. The cytotoxic influence, cell cycle distribution,and apoptosis stage of OLE and OLE-CNPs were analyzed on lung carcinoma(A549) and breast adenocarcinoma (MCF-7) cell lines. In an in vitrocytotoxic assay, IC50 values of OLE-CNPs were determinedto be 540 & mu;g/mL for A549 and 810 & mu;g/mL for MCF-7. Thetreatment of both A549 and MCF-7 with OLE-CNPs caused the highestcell arrest in G0/G1 in a dose-independent manner. OLE-CNPs affectedcell cycle distribution in a manner different from free OLE treatmentin both cancer cells. A549 and MCF-7 cells were predominantly foundin the late apoptosis and necrosis phases, respectively, upon treatmentof 1000 & mu;M OLE-CNPs. Our results suggest that CNPs enhance theutility of OLEs as nutraceuticals in cancer and that OLE-CNPs canbe utilized as an adjunct to cancer therapy.Article Citation - WoS: 8Citation - Scopus: 9Development of Plant-Based Biopolymer Coatings for 3d Cell Culture: Boron-Silica Quince Seed Mucilage Nanocomposites(Royal Society of Chemistry, 2023) Yılmaz, Hilal Deniz; Cengiz, Uğur; Derkuş, Burak; Arslan, Yavuz EmreSpheroid formation with spontaneous aggregation has captured interest in most cell culture studies due to its easy set-up and more reliable results. However, the economic and technical costs of the advanced systems and commercial ultra-low adhesive platforms have pushed researchers into pursuing alternatives. Nowadays, polymeric coatings, including poly-hydroxyethyl methacrylate and agar/agarose, are the commonly used polymers for non-adhesive plate fabrication, yet the costs and working solvent or heat-dependent preparation procedures maintain the need for the development of novel biomaterials. Here, we propose a greener and more economical approach for producing non-adherent surfaces and spheroid formation. For this, a plant waste-based biopolymer from quince fruit (Cydonia oblonga Miller, from Rosaceae family) seeds and boron-silica precursors were introduced. The unique water-holding capacity of quince seed mucilage (Q) was enriched with silanol and borate groups to form bioactive and hydrophilic nanocomposite overlays for spheroid studies. Moreover, 3D gel plates from the nanocomposite material were fabricated and tested in vitro as a proof-of-concept. The surface properties of coatings and the biochemical and mechanical properties of the nanocomposite materials were evaluated in-depth with techniques, and extra hydrophilic coatings were obtained. Three different cell lines were cultured on these nanocomposite surfaces, and spheroid formation with increased cellular viability was recorded on day 3 with a >200 & mu;m spheroid size. Overall, Q-based nanocomposites are believed to be a fantastic alternative for non-adherent surface fabrication due to their low-cost, easy operation, and intrinsic hydration layer forming capacity with biocompatible nature in vitro.Review Citation - WoS: 52Citation - Scopus: 56Spheroid engineering in microfluidic devices(American Chemical Society, 2023) Tevlek, Atakan; Keçili, Seren; Özçelik, Özge Solmaz; Kulah, Haluk; Tekin, H. CumhurTwo-dimensional (2D) cell culture techniques are commonly employed to investigate biophysical and biochemical cellular responses. However, these culture methods, having monolayer cells, lack cell-cell and cell-extracellular matrix interactions, mimicking the cell microenvironment and multicellular organization. Three-dimensional (3D) cell culture methods enable equal transportation of nutrients, gas, and growth factors among cells and their microenvironment. Therefore, 3D cultures show similar cell proliferation, apoptosis, and differentiation properties to in vivo. A spheroid is defined as self-assembled 3D cell aggregates, and it closely mimics a cell microenvironment in vitro thanks to cell-cell/matrix interactions, which enables its use in several important applications in medical and clinical research. To fabricate a spheroid, conventional methods such as liquid overlay, hanging drop, and so forth are available. However, these labor-intensive methods result in low-throughput fabrication and uncontrollable spheroid sizes. On the other hand, microfluidic methods enable inexpensive and rapid fabrication of spheroids with high precision. Furthermore, fabricated spheroids can also be cultured in microfluidic devices for controllable cell perfusion, simulation of fluid shear effects, and mimicking of the microenvironment-like in vivo conditions. This review focuses on recent microfluidic spheroid fabrication techniques and also organ-on-a-chip applications of spheroids, which are used in different disease modeling and drug development studies.Article Citation - WoS: 17Citation - Scopus: 18Development of a Hydrocolloid Bio-Ink for 3d Bioprinting(Royal Society of Chemistry, 2022) Yıldırım, Özüm; Arslan Yıldız, AhuA new generation of bio-inks that are soft, viscous enough, stable in cell culture, and printable at low printing pressures is required in the current state of 3D bioprinting technology. Hydrogels can meet these features and can mimic the microenvironment of soft tissues easily. Hydrocolloids are a group of hydrogels which have a suitable gelling capacity and rheological properties. According to the literature, polysaccharide-based hydrocolloids are used in the food industry, wound healing technologies, and tissue engineering. Quince seed hydrocolloids (QSHs), which consist of mostly glucuronoxylan, can easily be obtained from quince seeds by water extraction. In this study, the use of a QSH as a bio-ink was investigated. The suitability of QSH for the printing process was assessed by rheological, uniformity and pore factor analyses. Appropriate printing parameters were determined and the characterization of the bioprinted QSHs was performed by SEM analysis, water uptake capacity measurement, and protein adsorption assay. The bioprinted QSHs had excellent water uptake capacity and showed suitable protein adsorption behaviour. Analyses of the biocompatibility and cellular viability of bioprinted QSHs were conducted using NIH-3T3 fibroblast cells and the results were found to be high during short and long-term cell culture periods. It was proved that QSH is a highly promising bio-ink for 3D bioprinting and further tissue engineering applications.Conference Object Computational Nanotoxicology: a Case Study With Silver and Zinc Nanomaterials(Elsevier, 2022) Bilgi, Eyüp; Öksel Karakuş, CeydaNanomaterials (NMs) have been the focus of basic and applied research for more than two decades. According to the updated consumer materials inventory, over 1800 commercial NMs have taken their place in the market, 42% of which are in health and wellness category1. The widespread use of NMs in health-related products made not only the human exposure to the (residues of) NMs inevitable but also the long-recognized concerns over their safety a priority. Despite this pressing need, more than 70% of commercially available nano-containing products do not include sufficient information about their physicochemical and/or toxicological characteristics.Conference Object Citation - WoS: 1Green Synthesis of Nanostructured Bioactive Glass for Dental Applications(Elsevier, 2022) Tüncer, Melisa; Yücesoy, Deniz Tanıl; Öksel Karakuş, CeydaCalcium sodium phosphosilicate (known as bioactive glass) is a biomaterial commonly used in dental care products and bone tissue engineering applications due to biocompatibility, bone-forming and dentin sensitivity reduction capability. Bioactive 45S5 glass, so-called NovaMin, comprises of 45% SiO2, 24.5% Na2O, 24.5% CaO, and 6% P2O5 (wt%). It is traditionally synthesized by wet chemical methods such as melt-quenching and sol-gel which requires high temperature heating and the use of a strong acid catalyst, which brings into the question of the possibility of introducing toxic acid residues into the final product. Therefore, there is a clear need to develop environmental-friendly bioactive glass synthesis methods or to modify existing ones in a way to uplift their environmental friendliness.Conference Object Comparative Study of the Cytotoxicity of Hydroxyapatite, Tricalcium Phosphate and Calcium Phosphate Nanomaterials on Panc-1 and Hek293 Cell Line(Elsevier, 2022) Çeşmeli, Selin; Öksel Karakuş, CeydaCalcium phosphate-based bioceramic nanoparticles have been actively used in a range of therapeutic applications. Although they are mostly considered as biocompatible materials, the circulation of nanoparticles in the bloodstream raise further questions as to what degree of cellular damage they are capable of causing once carried out to vital organs such as kidney and pancreas. Therefore, there is a clear need to explore potential cellular damage induced by commercially used bioceramic nanoparticles such as hydroxyapatite (HAp), tricalcium phosphate (TCP) and calcium phosphate (CaP).
- «
- 1 (current)
- 2
- 3
- »