Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
15 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 4Biopatterning of 3d Cellular Model by Contactless Magnetic Manipulation for Cardiotoxicity Screening(Mary Ann Liebert, Inc, 2023) Önbaş, Rabia; Arslan Yıldız, AhuPatterning cells to create three-dimensional (3D) cell culture models by magnetic manipulation is a promising technique, which is rapid, simple, and cost-effective. This study introduces a new biopatterning approach based on magnetic manipulation of cells with a bioink that consists alginate, cells, and magnetic nanoparticles. Plackett-Burman and Box-Behnken experimental design models were used to optimize bioink formulation where NIH-3T3 cells were utilized as a model cell line. The patterning capability was confirmed by light microscopy through 7 days culture time. Then, biopatterned 3D cardiac structures were formed using H9c2 cardiomyocyte cells. Cellular and extracellular components, F-actin and collagen Type I, and cardiac-specific biomarkers, Troponin T and MYH6, of biopatterned 3D cardiac structures were observed successfully. Moreover, Doxorubicin (DOX)-induced cardiotoxicity was investigated for developed 3D model, and IC50 value was calculated as 8.1 μM for biopatterned 3D cardiac structures, which showed higher resistance against DOX-exposure compared to conventional two-dimensional cell culture. Hereby, developed biopatterning methodology proved to be a simple and rapid approach to fabricate 3D cardiac models, especially for drug screening applications. Copyright 2023, Mary Ann Liebert, Inc., publishers.Conference Object Biofabrication of Scaffold-Free 3d Cellular Structures Using Magnetic Levitational Assembly To Study Cardiac Toxicity(Mary Ann Liebert, 2023) Yıldız, Ahu Arslan; Arslan Yıldız, Ahu; Onbaş, RabiaSpheroids are one of the well-characterized 3D cell culture approaches for drug screening and therapeutic studies. Magnetic levitation (MagLev) is a newly developing approach to form 3D cellular structures and spheroids [1,2,3]. Magnetic levitational assembly of cells provides rapid, simple, cost-effective 3D cell culture formation while ensuring scaffold-free microenvironment. Here, our efforts are summarized in designing new magnetic levitation platform and biofabrication of 3D cellular entities via magnetic levitation for tissue engineering. Magnetic levitation and guidance of cells were provided by using a paramagnetic agent to fabricate scaffold-free 3D cellular structures. The parameters of cell density, paramagnetic agent concentration, and culturing time were optimized to obtain 3D cardiac cellular structures with tunable size, circularity, and high cell viability. Cellular and extracellular components of the 3D cellular structures were demonstrated via immunofluorescent staining. Also, 3D cardiac cellular structures showed more resistance to drug exposure compared to 2D control. In conclusion, MagLev methodology offers an easy and efficient way to fabricate 3D cellular structures for drug screening studies.Conference Object Biopatterning of 3d Cellular Structures Via Contactless Magnetic Manipulation for Drug Screening(Mary Ann Liebert, 2023) Önbaş, Rabia; Arslan Yıldız, Ahu"Patterning and manipulation techniques have been used to fabricate 3D cell cultures in tissue engineering. The contactless magnetic manipulation approach is a rapid, simple, and cost-effective method that requires paramagnetic agents [1-3] or magnetic materials [4]. Here, to obtain patterned 3D cellular structures a new alginate-based bio-ink formulation was developed to fabricate 3D cellular structures using contactless magnetic manipulation. 3D cardiac model was obtained by patterning rat cardiomyocytes. Cellular and extracellular components and cardiac-specific markers of patterned 3D cellular structures were indicated successfully. Drug response of patterned 3D cellular structures was evaluated by applying doxorubicin. Patterned 3D cardiac cellular structures showed significantly different drug response compared to conventional 2D cell cultures. In conclusion, this technique provides an easy, efficient, and low-cost methodology to fabricate 3D cardiac structures for drug screening.Book Part Citation - Scopus: 2Bioprinting of Hydrogels for Tissue Engineering and Drug Screening Applications(Elsevier, 2022) Özmen, Ece; Yıldırım, Özüm; Arslan Yıldız, AhuIn tissue engineering, the 3-dimensional (3D) bioprinting method that enables the production of 3D structures by combining bioinks and cells has become one of the most promising technique. Over the last few years, 3D cell culture models gained importance in the development of disease model and drug development studies. The successful production of the 3D structures by 3D bioprinting mostly depends on the properties of the bioink to be used. Hydrogels, which are natural or synthetic polymers, are generally preferred as bioink materials with their high swelling ability, biocompatibility, biodegradability, and easy gelation ability. The convenience of hydrogels for varied bioprinting applications make them proper bioink materials for bioprinting of artificial tissues, tumor models, and tissue grafts. Bioprinting of functional tissues is successfully performed for years, and hydrogels are utilized as bioink in bone, vascular, neural, cartilage, cardiac, skin tissue engineering, and drug screening. In this chapter, bioprinting methodology, bioinks, hydrogel bioinks, and their applications are discussed in detail. © 2023 Elsevier Inc. All rights reserved.Review Citation - WoS: 52Citation - Scopus: 56Spheroid engineering in microfluidic devices(American Chemical Society, 2023) Tevlek, Atakan; Keçili, Seren; Özçelik, Özge Solmaz; Kulah, Haluk; Tekin, H. CumhurTwo-dimensional (2D) cell culture techniques are commonly employed to investigate biophysical and biochemical cellular responses. However, these culture methods, having monolayer cells, lack cell-cell and cell-extracellular matrix interactions, mimicking the cell microenvironment and multicellular organization. Three-dimensional (3D) cell culture methods enable equal transportation of nutrients, gas, and growth factors among cells and their microenvironment. Therefore, 3D cultures show similar cell proliferation, apoptosis, and differentiation properties to in vivo. A spheroid is defined as self-assembled 3D cell aggregates, and it closely mimics a cell microenvironment in vitro thanks to cell-cell/matrix interactions, which enables its use in several important applications in medical and clinical research. To fabricate a spheroid, conventional methods such as liquid overlay, hanging drop, and so forth are available. However, these labor-intensive methods result in low-throughput fabrication and uncontrollable spheroid sizes. On the other hand, microfluidic methods enable inexpensive and rapid fabrication of spheroids with high precision. Furthermore, fabricated spheroids can also be cultured in microfluidic devices for controllable cell perfusion, simulation of fluid shear effects, and mimicking of the microenvironment-like in vivo conditions. This review focuses on recent microfluidic spheroid fabrication techniques and also organ-on-a-chip applications of spheroids, which are used in different disease modeling and drug development studies.Conference Object Development of Novel Nanotoxicity Assessment Method Utilizing 3d Printing System(Elsevier, 2022) Başlar, Muhammet Semih; Öksel Karakuş, Ceyda; Aldemir Dikici, BetülUnique physicochemical properties of nanomaterials (NMs) make them a material of choice in various applications but also raise concerns about their potential toxicity. While the commercial use of nano-enabled materials is growing rapidly, their interaction with biological systems and environment are not yet fully understood [1, 2]. Traditionally, toxicity of nano-sized materials are assessed by 2D cell culture models due to their time and cost-related advantages but their simplicity often comes at the cost of accuracy. While these methods are considered as the first step in toxicological assessment of both nanosized and bulk-form materials, they fall short in mimicking the complexity of in vivo physiological environments.Conference Object On-Chip 3d Cell Culture Platform for Tumor Modeling and Drug Screening(Mary Ann Liebert, 2022) Yıldırım, Özüm; Arslan Yıldız, AhuThree-dimensional (3D) cell culture allows cell-cell and cellmatrix interactions and provides more in vivo like models rather than 2D cell culture which cannot fully mimic native tissue. 3D cell culture on microfluidics allows formation of 3D structures that mimic the physiological and chemical microenvironment for cells[1]. These microfluidic platforms also downsize bench-top laboratory to a microchip, require miniaturized reagent, and are convenient for dynamic drug screening[2]. In this study, a microfluidic platform was designed which is housing a PLLCL scaffold fabricated by electrospinning methodology.Conference Object Biofabrication by Magnetic Levitational Assembly of Cells Into Defined 3d Cellular Structures(Mary Ann Liebert, 2022) Arslan Yıldız, AhuIn the field of tissue engineering 3D (three dimensional) cell culture studies have increased over the years since they are the closest models of real tissues. Compared to the 2D models, there is a big improvement on cell growth, morphology, differentiation, gene and protein expression when 3D system is utilized. Because of these advantages 3D cell culture is commonly used for tissue engineering, artificial organ technologies, regenerative medicine, drug development, drug screening and stem cell studies. Despite promising advances in these areas, there are still unmet needs to completely fulfill all requirements. Sophisticated tools, methodologies and materials are still required for further development in tissue engineering; especially for cellular assembly, single cell level control, easy control over biofabrication system, direct forward cellular imaging and analysis. Recently, magnetic levitation technology that overcomes most of the above mentioned problems, has been utilized for the formation of 3D cellular structures. Magnetic levitational assembly of cells provide rapid, simple, cost-effective 3D cell culture formation while ensuring scaffold-free microenvironment.Conference Object Development of New Generation Hydrocolloid Bio-Ink for 3d Bioprinting(Mary Ann Liebert, 2022) Arslan Yıldız, AhuBioprinting enables the production of 3-dimensional (3D) structures by combining bioinks, living cells, extracellular matrix (ECM) components, biochemical factors, proteins, drugs; and it has recently become one of the most promising techniques in the field of tissue engineering. The successful production of the 3D structure to be created by 3D bioprinting technology depends on the properties of the bio-ink to be used. Hydrogel/hydrocolloid materials used as bio-inks are developed using synthetic and natural polymers where they have the necessary rheological properties for printing, they also have biocompatibility, low toxicity and support for cell attachment. Natural hydrogels, which have the ability to mimic the extracellular matrix structure and function at a high rate, are highly preferred bioink materials for bioprinting applications.Article Citation - WoS: 43Citation - Scopus: 46Glucuronoxylan-Based Quince Seed Hydrogel: a Promising Scaffold for Tissue Engineering Applications(Elsevier, 2021) Güzelgülgen, Meltem; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuNatural gums and mucilages from plant-derived polysaccharides are potential candidates for a tissue-engineering scaffold by their ability of gelation and biocompatibility. Herein, we utilized Glucuron-oxylanbased quince seed hydrogel (QSH) as a scaffold for tissue engineering applications. Optimization of QSH gelation was conducted by varying QSH and crosslinker glutaraldehyde (GTA) concentrations. Structural characterization of QSH was done by Fourier Transform Infrared Spectroscopy (MR). Furthermore, morphological and mechanical investigation of QSH was performed by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The protein adsorption test revealed the suitability of QSH for cell attachment. Biocompatibility of QSH was confirmed by culturing NIH-3T3 mouse fibroblast cells on it. Cell viability and proliferation results revealed that optimum parameters for cell viability were 2 mg mi(-1)of QSH and 0.03 M GTA. SEM and DAPI staining results indicated the formation of spheroids with a diameter of approximately 300 pm. Furthermore, formation of extracellular matrix (ECM) microenvironment was confirmed with the Collagen Type-I staining. Here, it was demonstrated that the fabricated QSH is a promising scaffold for 3D cell culture and tissue engineering applications provided by its highly porous structure, remarkable swelling capacity and high biocompatibility. (C) 2021 Published by Elsevier B.V.