Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
264 results
Filters
Settings
Search Results
Conference Object A Glucuronoxylan-Based Bio-Ink Development: Characterization and Application(Wiley, 2023) Yıldırım, Ömer; Arslan Yıldız, AhuBioprinting is a trending technique that enables the fabrication of threedimensional (3D) constructs in designed shapes and with desired properties. Bioinks are one of the most significant components of bioprinting and the successful fabrication of 3D bioprinted constructs mostly depends on the features of bioinks that would be used. New generation bioinks that are soft and viscous enough, printable under low pressure, stable in cell culture, and have fast gelation mechanisms are ideal to be used in current bioprinting techniques. Hydrocolloids have said features and have similar properties to native ECM structures. Hence bioinks that are developed from hydrocolloids can be utilized for mimicking of ECM structure of soft tissues. Polysaccharidebased hydrocolloids are ideal bioink candidates with their high waterholding capacity and biocompatibility. Here, a glucuronoxylanbased newgeneration bioink was developed, and its printability was evaluated for 3D bioprinting applications. The glucuronoxylanbased hydrocolloid was obtained by water extraction of quince seeds and its utilization in bioprinting was investigated. Bioink characterization was done by FTIR and mechanical analysis. Bioprinting parameters were optimized assessing uniformity, pore factor, and shape fidelity. Then, the characterization of bioprinted constructs was performed by pore angle measurement, waterholding capacity analysis, protein adsorption, and cell viability assays. Bioprinted structures have high mechanical strength, suitable protein adsorption behavior, and waterholding capacity as high as 20fold of its own weight, which is higher than other hydrogels that were used in soft tissue engineering. Moreover, the cell viability results of fibroblast cells in the bioink were high for longterm culture. In conclusion, findings show that the developed glucuronoxylanbased bioink is a biocompatible and promising bioink material for further tissue engineering applications.Article Citation - WoS: 4Citation - Scopus: 5Antioxidant and Antimicrobial Activities of Plants Grown in the Mediterranean Region(John Wiley and Sons Inc., 2022) Kaçar, D.; Bayraktar, Oğuz; Erdem, C.; Alamri, A.S.; Galanakis, C.M.Background: The main objective of this research was to identify plant species with possible bioactivities based on their total phenol content, antioxidant, and antimicrobial properties. Therefore, different parts of 42 plant species grown in the Mediterranean region were extracted with aqueous ethanol solutions to prepare extracts with antioxidant and antimicrobial activities, mainly resulting from their total phenol contents. No detailed laboratory data on the flora of this area exists regarding their total phenol contents and total antioxidant activities. Results: Yields of extraction for each plant material were determined. Extracts were characterized based on their total phenol contents, total antioxidant (both hydrophilic and lipophilic), and antimicrobial activities using Folin–Ciocalteu, Photochemiluminescence, disc diffusion, and microdilution methods, respectively. The extract of Hypericum empetrifolium had the relatively highest total water-soluble and lipid-soluble antioxidant activities. Sarcopoterium spinosum extract had relatively high total phenol content. Preliminary screening study was conducted with the disc diffusion method to evaluate the extracts' antimicrobial activities. 26 out of 42 plant species showed significant antimicrobial activities against the growth of microorganisms. Microdilution assays were performed to evaluate the most active plant species with their minimum inhibition concentrations. H. empetrifolium, Pistacia terebinthus, Arbutus unedo, and Cistus parviflorus were the most antimicrobial plant species among those investigated. CONCLUSION: The new potential sources for the isolation of bioactive natural compounds from specific plant species could be possible with the help of this present screening study. Isolated bioactive natural compounds can be utilized as raw materials in cosmetics, nutraceuticals, food supplements, and pharmaceutical industries. © 2022 Society of Chemical Industry.Conference Object Biopatterning of 3d Cellular Structures Via Contactless Magnetic Manipulation for Drug Screening(Mary Ann Liebert, 2023) Onbas, Rabia; Arslan Yıldız, AhuAnnotation On-Chip 3d Cell Culture Platform for Tumor Modeling and Drug Screening(2022) Yıldırım, Özüm; Arslan Yıldız, AhuArticle Citation - WoS: 14Citation - Scopus: 163D Bioprinting of mouse pre-osteoblasts and human MSCs using bioinks consisting of gelatin and decellularized bone particles(Iop Publishing Ltd, 2024) Kara, Aylin; Distler, Thomas; Akkineni, Ashwini Rahul; Tihminlioglu, Funda; Gelinsky, Michael; Boccaccini, Aldo R.One of the key challenges in biofabrication applications is to obtain bioinks that provide a balance between printability, shape fidelity, cell viability, and tissue maturation. Decellularization methods allow the extraction of natural extracellular matrix, preserving tissue-specific matrix proteins. However, the critical challenge in bone decellularization is to preserve both organic (collagen, proteoglycans) and inorganic components (hydroxyapatite) to maintain the natural composition and functionality of bone. Besides, there is a need to investigate the effects of decellularized bone (DB) particles as a tissue-based additive in bioink formulation to develop functional bioinks. Here we evaluated the effect of incorporating DB particles of different sizes (<= 45 and <= 100 mu m) and concentrations (1%, 5%, 10% (wt %)) into bioink formulations containing gelatin (GEL) and pre-osteoblasts (MC3T3-E1) or human mesenchymal stem cells (hTERT-MSCs). In addition, we propose a minimalistic bioink formulation using GEL, DB particles and cells with an easy preparation process resulting in a high cell viability. The printability properties of the inks were evaluated. Additionally, rheological properties were determined with shear thinning and thixotropy tests. The bioprinted constructs were cultured for 28 days. The viability, proliferation, and osteogenic differentiation capacity of cells were evaluated using biochemical assays and fluorescence microscopy. The incorporation of DB particles enhanced cell proliferation and osteogenic differentiation capacity which might be due to the natural collagen and hydroxyapatite content of DB particles. Alkaline phosphatase activity is increased significantly by using DB particles, notably, without an osteogenic induction of the cells. Moreover, fluorescence images display pronounced cell-material interaction and cell attachment inside the constructs. With these promising results, the present minimalistic bioink formulation is envisioned as a potential candidate for bone tissue engineering as a clinically translatable material with straightforward preparation and high cell activity.Review Citation - WoS: 17Citation - Scopus: 16Engineering Periodontal Tissue Interfaces Using Multiphasic Scaffolds and Membranes for Guided Bone and Tissue Regeneration(Elsevier, 2024) Özkendir, Özge; Karaca, İlayda; Çullu, Selin; Yaşar, Hüsniye Nur,; Erdoğan, Oğulcan; Dikici, Serkan; Dikici, Betul AldemirPeriodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.Article Citation - Scopus: 3Development of Chrono-Spectral Gold Nanoparticle Growth Based Plasmonic Biosensor Platform(Elsevier, 2024) Sözmen, Alper Baran; Elveren, Beste; Erdoğan, Duygu; Mezgil, Bahadır; Baştanlar, Yalın; Yıldız, Ümit Hakan; Arslan Yıldız, AhuPlasmonic sensor platforms are designed for rapid, label-free, and real-time detection and they excel as the next generation biosensors. However, current methods such as Surface Plasmon Resonance require expertise and well-equipped laboratory facilities. Simpler methods such as Localized Surface Plasmon Resonance (LSPR) overcome those limitations, though they lack sensitivity. Hence, sensitivity enhancement plays a crucial role in the future of plasmonic sensor platforms. Herein, a refractive index (RI) sensitivity enhancement methodology is reported utilizing growth of gold nanoparticles (GNPs) on solid support and it is backed up with artificial neural network (ANN) analysis. Sensor platform fabrication was initiated with GNP immobilization onto solid support; immobilized GNPs were then used as seeds for chrono-spectral growth, which was carried out using NH2OH at varied incubation times. The response to RI change of the platform was investigated with varied concentrations of sucrose and ethanol. The detection of bacteria E.coli BL21 was carried out for validation as a model microorganism and results showed that detection was possible at 102 CFU/ml. The data acquired by spectrophotometric measurements were analyzed by ANN and bacteria classification with percentage error rates near 0% was achieved. The proposed LSPR-based, label-free sensor application proved that the developed methodology promises utile sensitivity enhancement potential for similar sensor platforms. © 2024 The Author(s)Conference Paper 3d Printing-Assisted Fabrication of Microfluidic Pneumatic Valves(IEEE, 2023) Keleş, Şeyda; Karakuzu, Betül; Tekin, Hüseyin CumhurPneumatic valves have a crucial place in the fluidic control in microfluidic systems. Pneumatic valves containing polydimethylsiloxane (PDMS) membrane structures are used in microfluidic systems such as cell separation, and cell manipulation due to their flexible structure, and ease of production. This study demonstrates the rapid and straightforward fabrication of pneumatic valve structures using PDMS membranes, achieved through the utilization of 3D-printed molds. As a result of our experiments, we observed valve closure in a fluidic channel with a height of 150 μm. This closure was achieved by utilizing 400 μm × 800 μm PDMS membrane with a thickness of 66 μm positioned between the fluidic and control channels, while applying 1.5 bar of pressure to the control channel. When the pressure is removed, the opening time of the valve is only 0.02 s, and this response time allows rapid valving function. The presented valve fabrication strategy would allow easy and low-cost production of sophisticated microfluidic chips. © 2023 IEEE.Article Citation - WoS: 1Citation - Scopus: 1The Soft Nanodots as Fluorescent Probes for Cell Imaging: Analysis of Cell and Spheroid Penetration Behavior of Single Chain Polymer Dots(Wiley, 2024) Yücel, Müge; Onbaş, Rabia; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes the formation, size control, and penetration behavior of polymer nanodots (Pdots) consisting of single or few chain polythiophene-based conjugated polyelectrolytes (CPEs) via nanophase separation between good solvent and poor solvent of CPE. Though the chain singularity may be associated with dilution nanophase separation suggests that molecules of a good solvent create a thermodynamically driven solvation layer surrounding the CPEs and thereby separating the single chains even in their poor solvents. This statement is therefore corroborated with emission intensity/lifetime, particle size, and scattering intensity of polyelectrolyte in good and poor solvents. Regarding the augmented features, Pdots are implemented into cell imaging studies to understand the nuclear penetration and to differentiate the invasive characteristics of breast cancer cells. The python based red, green, blue (RGB) color analysis depicts that Pdots have more nuclear penetration ability in triple negative breast cancer cells due to the different nuclear morphology in shape and composition and Pdots have penetrated cell membrane as well as extracellular matrix in spheroid models. The current Pdot protocol and its utilization in cancer cell imaging are holding great promise for gene/drug delivery to target cancer cells by explicitly achieving the very first priority of nuclear intake. The penetration capability of cationic soft nanodots in to tumor models of breast cancer is demonstrated. The image analysis based on fluorescence intensity variation reveals the characteristics of translocation of nanodots in dense mediums such as tumor models.imageArticle Anthraquinones and Macrocyclic Lactones From Endophytic Fungus Penicillium Roseopurpureum and Their Bioactivities(ACG Publications, 2024) Dizmen,B.; Üner,G.; Küçüksolak,M.; Gören,A.C.; Kırmızıbayrak,P.B.; Bedir,E.Endophytic fungi colonize the internal and distinct tissues of the host plants. In recent years, there has been growing interest in endophytic fungi as valuable sources for drug discovery based on their rich metabolic profiles consisting of novel and bioactive compounds. Accordingly, our preliminary study demonstrated that an endophyte, namely Penicillium roseopurpureum isolated from Astragalus angustifolius, had high chemical diversity with an antiproliferative effect. Herein, fermentation of P. roseopurpureum resulted in the production of five new anthraquinone-type compounds (2, 4, 6, 7, 8) together with several known compounds [11-methoxycurvularin (1: epimeric mixture of 1a and 1b), carviolin (3), 11-hydroxycurvularin (5: diastereoisomeric mixture of 5a and 5b) and 1-O-methylemodin (9)]. The structures of the new compounds were established by NMR spectroscopy and HR-MS analysis. Cytotoxicity studies demonstrated that none of the compounds except for 1 and 5 had antiproliferative activity against prostate cancer cell lines. Interestingly, 1 was found as cytotoxic, whereas 5 exhibited cytostatic properties. Also, 7-AAD/Annexin V staining supported these results by showing that 1 caused cellular death, while 5 did not show any increase in dead cell content in comparison to the control. Lastly, cell cycle analysis showed that compounds had distinctive cell cycle arrest patterns. © 2024 ACG Publications.