Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
33 results
Search Results
Now showing 1 - 10 of 33
Review Citation - WoS: 17Citation - Scopus: 16Engineering Periodontal Tissue Interfaces Using Multiphasic Scaffolds and Membranes for Guided Bone and Tissue Regeneration(Elsevier, 2024) Özkendir, Özge; Karaca, İlayda; Çullu, Selin; Yaşar, Hüsniye Nur,; Erdoğan, Oğulcan; Dikici, Serkan; Dikici, Betul AldemirPeriodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.Article Blank Frame and Intensity Variation Distortion Detection and Restoration Pipeline for Phase-Contrast Microscopy Time-Lapse Images(Aves, 2024) Ucar, Mahmut; Iheme, Leonardo O.; Onal, Sevgi; Pesen-Okvur, Devrim; Yalcin-Ozuysal, Ozden; Toreyin, Behcet U.; Unay, DevrimIn this study, we propose a preprocessing pipeline for the detection and correction of distorted frames in time-lapse images obtained from phase-contrast microscopy. The proposed pipeline employs the average intensities of frames as a foundational element for the analysis. In order to evaluate the degree of correction required for intensity variance, a normalization technique is applied to the difference between the average intensity of a specific frame and the median average intensity of all frames within the study. Our restoration method increases the histogram similarity between the distorted and non-distorted frames, preserves trans-passing pixels in regions of interest, and mitigates the development of additional distortions. The efficacy of the proposed method was evaluated using 15 395 time-lapse image frames from 27 experiments using our own dataset and 830 time-lapse images from four different experiments obtained from the cell tracking challenge. The results of the validation demonstrate a high degree of numerical and visual accuracy of the proposed pipeline.Article Citation - Scopus: 11Μdacs Platform: a Hybrid Microfluidic Platform Using Magnetic Levitation Technique and Integrating Magnetic, Gravitational, and Drag Forces for Density-Based Rare Cancer Cell Sorting(Elsevier, 2023) Keçili, Seren; Yılmaz, Esra; Özçelik, Özge Solmaz; Anıl İnevi, Müge; Günyüz, Zehra Elif; Yalçın Özuysal, Özden; Özçivici, Engin; Tekin, Hüseyin CumhurCirculating tumor cells (CTCs) are crucial indicators of cancer metastasis. However, their rarity in the bloodstream and the heterogeneity of their surface biomarkers present challenges for their isolation. Here, we developed a hybrid microfluidic platform (microfluidic-based density-associated cell sorting (µDACS) platform) that utilizes density as a biophysical marker to sort cancer cells from the population of white blood cells (WBCs). The platform utilizes the magnetic levitation technique on a microfluidic chip to sort cells based on their specific density ranges, operating under a continuous flow condition. By harnessing magnetic, gravitational, and drag forces, the platform efficiently separates cells. This approach involves a microfluidic chip equipped with a microseparator, which directs cells into top and bottom outlets depending on their levitation heights, which are inversely proportional to their densities. Hence, low-density cancer cells are collected from the top outlet, while high-density WBCs are collected from the bottom outlet. We optimized the sorting efficiency by varying the flow rates, and concentrations of the sorting medium's paramagnetic properties using standard densities of polymeric microspheres. To demonstrate the platform's applicability, we performed hybrid microfluidic sorting on MDA-MB-231 human breast cancer cells and U-937 human monocytes. The results showed efficient sorting of rare cancer cells (≥100 cells/mL) from serum samples, achieving a sorting efficiency of ∼70% at a fast-processing speed of 1 mL h−1. This label-free approach holds promise for rapid and cost-effective CTC sorting, facilitating in-vitro diagnosis and prognosis of cancer. © 2023 The Author(s)Research Project Erişkin kök hücrelerinde doku yönelimi ve dış mekanik etkilere bağlı gelişen altyapısal değişikliklerin karakterizasyonu(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2015) Özçivici, Engin; Yalçın Özuysal, Özden; Meşe Özçivici, GülistanMekanik titreşim uygulanması hem kemik hücrelerinde mineralizasyonu arttırdığı hem de kemik iliğindeki kök hücrelerini kemik yönelimine soktuğu için kemik kütlesini arttırıcı bir etkiye sahiptir. Mekanik sinyaller ayrıca yağ dokusu oluşumunu kemik iliği ve diğer yağ depolarında engeller özelliklere sahiptir. Kemik ve yağ hücrelerinin ortak bir hücre tipinden geldikleri düşünülürse, mekanik titreşim sinyalleri kullanılarak kemik oluşumu arttırılırken eşzamanlı olarak yağ oluşumu azaltılabilir. Halihazırda kemik iliği kök hücrelerinin bu tip mekanik titreşim sinyallerine duyarlı olup olmadığı ve eğer duyarlıysa bu sinyallere nasıl adapte olduğu henüz net olarak bilinmemektedir. Burada fare kemik iliğinden alınan mezenkimal D1-ORL-UVA kök hücreleri atıl durumda, kemik yöneliminde ya da yağ yönelimindeyken günlük mekanik titreşimlere (0.15g, 90 Hz, 15dk/gün) 7 gün boyunca maruz bırakıldı ve bu titreşimlerin hücrelerde yarattığı hücresel, morfolojik ve moleküler değişimler araştırıldı. Atıl durumdaki kök hücrelerde mekanik sinyaller hücre üremesini, hücrelerin toplam aktin miktarını ve kalınlığını arttırdığı gözlendi. Kemik yönelimi sırasında da mekanik sinyaller toplam aktin miktarı, aktin kalınlığı ve hücrelerin membran pürüzlülüklerini arttırdılar. Yağ yönelimi sırasında ise uygulanan mekanik kuvvetlerin hücrelerin yağ biriktirmesinden kaynaklanan morfolojik ve altyapısal etkileri geri çevirdiği gözlendi. Mekanik titreşimlerin ayrıca tüm yönelimler için hücrelerarası iletişimi arttırdıkları gözlendi. Sonuçlar yüksek frekanslı ve düşük genlikli mekanik titreşimlerin mezenkimal kök hücrelerin yönelimlerini belirleyen faktörlere önemli etkilerde bulunduklarını düşündürmektedir. Klinik aşamaya ulaşabilirse bu sonuçlar ilaçtan bağımsız bir etkinin kemik erimesi ve obezite için kullanılabileceğini düşündürmektedir.Conference Object Detection and Restoration Pipeline for Phase Contrast Microscopy Time Series Images(IEEE, 2022) Iheme, Leonardo O.; Uçar, Mahmut; Önal, Sevgi; Yalçın Özuysal, Özden; Pesen Okvur, Devrim; Töreyin, Behçet U.; Ünay, DevrimWe propose a pre-processing pipeline for the de-tection and restoration of distorted frames in phase-contrast microscopy time-series images. The analysis is based on the average intensity values of the frames within any given time- series image. The extent of the correction of intensity variation in frames is determined by the normalization of the difference between the current frame's average intensity and the median of average intensity of all frames. Our restoration algorithm preserves regional trans-passing pixels, does not cause new distortions, and increases the histogram similarity between the distorted and non-distorted frames. The algorithm was validated on 15,395 time-series image frames from 27 experiments and the results were found to be visually and quantitatively accurate.Article Citation - WoS: 7Citation - Scopus: 7Connexin 32 Overexpression Increases Proliferation, Reduces Gap Junctional Intercellular Communication, Motility and Epithelial-To Transition in Hs578t Breast Cancer Cells(Springer, 2022) Uğur, Deniz; Güngül, Taha Buğra; Yücel, Simge; Özçivici, Engin; Yalçın Özuysal, Özden; Meşe Özçivici, GülistanConnexins (Cx) are primary components of gap junctions that selectively allow molecules to be exchanged between adjacent cells, regulating multiple cellular functions. Along with their channel forming functions, connexins play a variety of roles in different stages of tumorigenesis and their roles in tumor initiation and progression is isoform- and tissue-specific. While Cx26 and Cx43 were downregulated during breast tumorigenesis, Cx32 was accumulated in the cytoplasm of the cells in lymph node metastasis of breast cancers and Cx32 was further upregulated in metastasis. Cx32's effect on cell proliferation, gap junctional communication, hemichannel activity, cellular motility and epithelial-to-mesenchymal transition (EMT) were investigated by overexpressing Cx32 in Hs578T and MCF7 breast cancer cells. Additionally, the expression and localization of Cx26 and Cx43 upon Cx32 overexpression were examined by Western blot and immunostaining experiments, respectively. We observed that MCF7 cells had endogenous Cx32 while Hs578T cells did not and when Cx32 was overexpressed in these cells, it caused a significant increase in the percentages of Hs578T cells at the S phase in addition to increasing their proliferation. Further, while Cx32 overexpression did not induce hemichannel activity in either cell, it decreased gap junctional communication between Hs578T cells. Additionally, Cx32 was mainly observed in the cytoplasm in both cells, where it did not form gap junction plaques but Cx32 overexpression reduced Cx43 levels without affecting Cx26. Moreover, migration and invasion potentials of Hs578T and migration in MCF7 were reduced upon Cx32 overexpression. Finally, the protein level of mesenchymal marker N-cadherin decreased while epithelial marker ZO-1 and E-cadherin increased in Hs578T cells. We observed that Cx32 overexpression altered cell proliferation, communication, migration and EMT in Hs578T, suggesting a tumor suppressor role in these cells while it had minor effects on MCF7 cells.Article Citation - WoS: 17Citation - Scopus: 22Protein Corona Formation on Silver Nanoparticles Under Different Conditions(Elsevier, 2022) Tomak, Aysel; Yılancıoğlu, Buket; Winkler, David; Öksel Karakuş, CeydaThe surfaces of nanoparticles become covered by biomolecules in biological fluids. This protein ‘corona’ modifies materials’ characteristics and biological activity. The composition of the protein corona is dynamic, abundant biomolecules that bind first are subsequently replaced by less abundant but more tightly bound ones. Here, we explore the formation of the silver nanoparticle protein corona on exposure to cell culture media containing 10 % fetal bovine serum supplemented Dulbecco's Modified Eagle's medium. Sodium dodecyl-sulfate polyacrylamide gel electrophoresis and liquid chromatography-mass spectrometry/mass spectrometry analysis were used to monitor how different parameters such as incubation time, heating duration, cell culture medium, incubation temperature, and the number of washes affect the nanoparticle–protein corona complex. silver nanoparticles with and without bound proteins were characterized by electron microscopy, dynamic light scattering, and ultraviolet-visible-near-IR spectroscopy. The tetrazolium-based MTT assay was used to determine viability of A549 human lung adenocarcinoma cells treated with silver nanoparticles. Characterization of the nanoparticles before and after protein binding provided insights into their changing morphology on corona formation. Our results confirmed that the physiological environment directly affects protein corona formation on nanoparticle surfaces. In particular, incubation condition-dependent differences in the amount of bound proteins were observed. This work highlights the importance of environmental drivers of protein adsorption, which should be considered when predicting and/or controlling protein targets of silver nanoparticles.Article Citation - WoS: 12Citation - Scopus: 12Sema6d Differentially Regulates Proliferation, Migration, and Invasion of Breast Cell Lines(American Chemical Society, 2022) Günyüz, Zehra Elif; Sahi İlhan, Ece; Küçükköse, Cansu; İpekgil, Doğaç; Tok, Güneş; Meşe, Gülistan; Özçivici, Engin; Yalçın Özuysal, ÖzdenSemaphorin 6D (SEMA6D), a member of the class 6 semaphorin family, is a membrane-associated protein that plays a key role in the development of cardiac and neural tissues. A growing body of evidence suggests that SEMA6D is also involved in tumorigenesis. In breast cancer, high SEMA6D levels are correlated with better survival rates. However, very little is known about the functional significance of SEMA6D in breast tumorigenesis. In the present study, we aimed to investigate the effects of SEMA6D expression on the normal breast cell line MCF10A and the breast cancer cell lines MCF7 and MDA MB 231. We demonstrated that SEMA6D expression increases the proliferation of MCF10A cells, whereas the opposite effect was observed in MCF7 cells. SEMA6D expression induced anchorage-independent growth in both cancer cell lines. Furthermore, migration of MCF10A and MCF7 cells and invasion of MDA MB 231 cells were elevated in response to SEMA6D overexpression. Accordingly, the genes related to epithelial-mesenchymal transition (EMT) were altered by SEMA6D expression in MCF10A and MCF7 cell lines. Finally, we provided evidence that SEMA6D levels were associated with the expression of the cell cycle, EMT, and Notch signaling pathway-related genes in breast cancer patients' data. We showed for the first time that SEMA6D overexpression has cell-specific effects on the proliferation, migration, and invasion of normal and cancer breast cell lines, which agrees with the gene expression data of clinical samples. This study lays the groundwork for future research into understanding the functional importance of SEMA6D in breast cancerConference Object Citation - Scopus: 1Magnetic Levitation-Based Adipose Tissue Engineering Using Horizontal Magnet Deployment(IEEE, 2020) Sarıgil, Öykü; Tekin, Hüseyin Cumhur; Anıl İnevi, Müge; Anıl İnevi, Müge; Yılmaz, Esra; Sarıgil, Öykü; Özçelik, Özge; Meşe Özçivici, Gülistan; Meşe, Gülistan; Meşe Özçivici, Gülistan; Tekin, H. CumhurMagnetic levitation is a promising technique for tissue engineering with contact- and label-free approach. Levitation-based biofabrication systems emerge as a simple, rapid and versatile alternative to traditional tissue culture systems, since biofabrication specs can easily be tailored via magnet shape and configuration. This study aims at possible magnetic levitation systems for culture of adipose tissue cells. In this study, we performed two different magnet configurations, vertical and horizontal deployment, in an effort to be utilized in adipose tissue engineering.Conference Object Assessment of Cell Cycle and Viability of Magnetic Levitation Assembled Cellular Structures(IEEE, 2020) Anıl İnevi, Müge; Ünal, Yağmur Ceren; Yaman, Sena; Tekin, H. Cumhur; Meşe, Gülistan; Meşe, GülistanLabel-free magnetic levitation is one of the most recent Earth-based in vitro techniques that simulate the microgravity. This technique offers a great opportunity to biofabricate scaffold-free 3-dimensional (3D) structures and to study the effects of microgravity on these structures. In this study, self-assembled 3D living structures were fabricated in a paramagnetic medium by magnetic levitation technique and effects of the technique on cellular health was assessed. This magnetic force-assisted assembly system applied here offers broad applications in several fields, such as space biotechnology and bottom-up tissue engineering.