Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
9 results
Search Results
Now showing 1 - 9 of 9
Conference Object A Glucuronoxylan-Based Bio-Ink Development: Characterization and Application(Wiley, 2023) Yıldırım, Ömer; Arslan Yıldız, AhuBioprinting is a trending technique that enables the fabrication of threedimensional (3D) constructs in designed shapes and with desired properties. Bioinks are one of the most significant components of bioprinting and the successful fabrication of 3D bioprinted constructs mostly depends on the features of bioinks that would be used. New generation bioinks that are soft and viscous enough, printable under low pressure, stable in cell culture, and have fast gelation mechanisms are ideal to be used in current bioprinting techniques. Hydrocolloids have said features and have similar properties to native ECM structures. Hence bioinks that are developed from hydrocolloids can be utilized for mimicking of ECM structure of soft tissues. Polysaccharidebased hydrocolloids are ideal bioink candidates with their high waterholding capacity and biocompatibility. Here, a glucuronoxylanbased newgeneration bioink was developed, and its printability was evaluated for 3D bioprinting applications. The glucuronoxylanbased hydrocolloid was obtained by water extraction of quince seeds and its utilization in bioprinting was investigated. Bioink characterization was done by FTIR and mechanical analysis. Bioprinting parameters were optimized assessing uniformity, pore factor, and shape fidelity. Then, the characterization of bioprinted constructs was performed by pore angle measurement, waterholding capacity analysis, protein adsorption, and cell viability assays. Bioprinted structures have high mechanical strength, suitable protein adsorption behavior, and waterholding capacity as high as 20fold of its own weight, which is higher than other hydrogels that were used in soft tissue engineering. Moreover, the cell viability results of fibroblast cells in the bioink were high for longterm culture. In conclusion, findings show that the developed glucuronoxylanbased bioink is a biocompatible and promising bioink material for further tissue engineering applications.Article Citation - WoS: 1Citation - Scopus: 1The Soft Nanodots as Fluorescent Probes for Cell Imaging: Analysis of Cell and Spheroid Penetration Behavior of Single Chain Polymer Dots(Wiley, 2024) Yücel, Müge; Onbaş, Rabia; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes the formation, size control, and penetration behavior of polymer nanodots (Pdots) consisting of single or few chain polythiophene-based conjugated polyelectrolytes (CPEs) via nanophase separation between good solvent and poor solvent of CPE. Though the chain singularity may be associated with dilution nanophase separation suggests that molecules of a good solvent create a thermodynamically driven solvation layer surrounding the CPEs and thereby separating the single chains even in their poor solvents. This statement is therefore corroborated with emission intensity/lifetime, particle size, and scattering intensity of polyelectrolyte in good and poor solvents. Regarding the augmented features, Pdots are implemented into cell imaging studies to understand the nuclear penetration and to differentiate the invasive characteristics of breast cancer cells. The python based red, green, blue (RGB) color analysis depicts that Pdots have more nuclear penetration ability in triple negative breast cancer cells due to the different nuclear morphology in shape and composition and Pdots have penetrated cell membrane as well as extracellular matrix in spheroid models. The current Pdot protocol and its utilization in cancer cell imaging are holding great promise for gene/drug delivery to target cancer cells by explicitly achieving the very first priority of nuclear intake. The penetration capability of cationic soft nanodots in to tumor models of breast cancer is demonstrated. The image analysis based on fluorescence intensity variation reveals the characteristics of translocation of nanodots in dense mediums such as tumor models.imageArticle Citation - WoS: 7Citation - Scopus: 8Bioinspired Multi-Layer Biopolymer-Based Dental Implant Coating for Enhanced Osseointegration(Wiley, 2023) Üzülmez, Betül; Demirsoy, Zeynep; Can, Özge; Gülseren, GulcihanThe major drawbacks of metal-based implants are weak osseointegration and post-operational infections. These limitations restrict the long-term use of implants that may cause severe tissue damage and replacement of the implant. Recent strategies to enhance the osseointegration process require an elaborate fabrication process and suffer from post-operative complications. To address the current challenges taking inspiration from the extracellular matrix (ECM), the current study is designed to establish enhanced osseointegration with lowered risk of infection. Natural biopolymer pectin, peptide amphiphiles, and enzyme-mimicking fullerene moieties are governed to present an ECM-like environment around the implant surfaces. This multifunctional approach promotes osseointegration via inducing biomineralization and osteoblast differentiation. Application of the biopolymer-based composite to the metal surfaces significantly enhances cellular attachment, supports the mineral deposition, and upregulates osteoblast-specific gene expression. In addition to the osteoinductive properties of the constructed layers, the inherent antimicrobial properties of multilayer coating are also used to prevent infection possibility. The reported biopolymer-artificial enzyme composite demonstrates antimicrobial activity against Escherichia coli and Bacillus subtilis as a multifunctional surface coating.Conference Object Citation - WoS: 1Immunomodulatory Mechanisms of Astragalus Saponins(Wiley, 2021) Yakuboğulları, Nilgün; Çağır, Ali; Bedir, Erdal; Sağ, DuyguConference Object Immobilized Gold Nanoparticle Based Plasmonic Assay Platform for Biomolecule and Microorganism Detection(Wiley, 2021) Sözmen, Alper Baran; Arslan Yıldız, AhuPlasmonic sensors are suitable tools for study of molecular interactions. Localized Surface Plasmon Resonance (LSPR) based sensors detect spectral changes associated with intramolecular interactions between analyte molecules and recognition elements. Due to its labelfree and highly sensitive features, LSPR based methods have high potential for biosensing applications. In this study, we aim to develop a sensitive, labelfree, rapid and simple biosensing platform. For this purpose, a novel refractive index (RI) sensitivity enhancement methodology is proposed by immobilizing gold nanoparticles (GNPs) for platformbased LSPR. Fabrication of platform was carried out by GNP synthesis, immobilization of GNPs on polystyrene solid support, and growth of GNPs. Validation of response to RI changes of developed sensor platform was carried out by tests with varying concentrations of sucrose and ethanol. Then as a proofofconcept, detection ability and detection limit determination of E.coli BL21 (DE3) and protein Bovine Serum Albumin (BSA) was carried out. Adsorption of E.coli BL21 (DE3) via bulk interactions showed that the developed LSPR platform exhibit high enough binding affinity for bacteria detection, and was able to detect down to concentrations as low as 102 CFU/ml. Immune capturing of BSA via antiBSA antibody showed that the developed LSPR platform was able to detect BSA protein–antibody interaction down to 10 µM concentration range.Article Citation - WoS: 6Citation - Scopus: 6Functional Characterization of a Novel Cyp119 Variant To Explore Its Biocatalytic Potential(Wiley, 2021) Sakallı, Tuğçe; Sürmeli, Nur BaşakBiocatalysts are increasingly applied in the pharmaceutical and chemical industry. Cytochrome P450 enzymes (P450s) are valuable biocatalysts due to their ability to hydroxylate unactivated carbon atoms using molecular oxygen. P450s catalyze reactions using nicotinamide adenine dinucleotide phosphate (NAD(P)H) cofactor and electron transfer proteins. Alternatively, P450s can utilize hydrogen peroxide (H2O2) as an oxidant, but this pathway is inefficient. P450s that show higher efficiency with peroxides are sought after in industrial applications. P450s from thermophilic organisms have more potential applications as they are stable toward high temperature, high and low pH, and organic solvents. CYP119 is an acidothermophilic P450 from Sulfolobus acidocaldarius. In our previous study, a novel T213R/T214I (double mutant [DM]) variant of CYP119 was obtained by screening a mutant library for higher peroxidation activity utilizing H2O2. Here, we characterized the substrate scope; stability toward peroxides; and temperature and organic solvent tolerance of DM CYP119 to identify its potential as an industrial biocatalyst. DM CYP119 displayed higher stability than wild-type (WT) CYP119 toward organic peroxides. It shows higher peroxidation activity for non-natural substrates and higher affinity for progesterone and other bioactive potential substrates compared to WT CYP119. DM CYP119 emerges as a new biocatalyst with a wide range of potential applications in the pharmaceutical and chemical industry.Article Citation - WoS: 22Citation - Scopus: 26Magnetic Levitation Assisted Biofabrication, Culture, and Manipulation of 3d Cellular Structures Using a Ring Magnet Based Setup(Wiley, 2021) Anıl İnevi, Müge; Delikoyun, Kerem; Meşe Özçivici, Gülistan; Tekin, Hüseyin Cumhur; Özçivici, EnginDiamagnetic levitation is an emerging technology for remote manipulation of cells in cell and tissue level applications. Low-cost magnetic levitation configurations using permanent magnets are commonly composed of a culture chamber physically sandwiched between two block magnets that limit working volume and applicability. This work describes a single ring magnet-based magnetic levitation system to eliminate physical limitations for biofabrication. Developed configuration utilizes sample culture volume for construct size manipulation and long-term maintenance. Furthermore, our configuration enables convenient transfer of liquid or solid phases during the levitation. Before biofabrication, we first calibrated/ the platform for levitation with polymeric beads, considering the single cell density range of viable cells. By taking advantage of magnetic focusing and cellular self-assembly, millimeter-sized 3D structures were formed and maintained in the system allowing easy and on-site intervention in cell culture with an open operational space. We demonstrated that the levitation protocol could be adapted for levitation of various cell types (i.e., stem cell, adipocyte and cancer cell) representing cells of different densities by modifying the paramagnetic ion concentration that could be also reduced by manipulating the density of the medium. This technique allowed the manipulation and merging of separately formed 3D biological units, as well as the hybrid biofabrication with biopolymers. In conclusion, we believe that this platform will serve as an important tool in broad fields such as bottom-up tissue engineering, drug discovery and developmental biology.Article Citation - WoS: 2Citation - Scopus: 2Cloning, Expression, and Characterization of a Novel Sericin-Like Protein(Wiley, 2022) Bostan, Fatmanur; Sürmeli, Nur BaşakSilk consists of two proteins called fibroin and sericin. While fibroin is used in the textile industry and has various biomaterial applications, sericin has been considered as waste material until recently. Sericin is a multicomponent protein and it has important properties such as biocompatibility, biodegradability, cryoprotectivity, and antioxidant. Sericin from silkworm cocoons can be obtained by chemical, enzymatic, and heat treatment methods. However, sericin obtained with these treatment methods is not of consistent and high quality. Moreover, the exposure of sericin to harsh conditions during extraction leads to inconsistencies in the composition and structure of the sericin obtained. The inconsistencies in sericin structure and composition decrease application of sericin as a biomaterial. Here, we produce a sericin-like protein (Ser4mer) with native sequence of sericin encoding four repeats of the conserved 38 amino acid motif recombinantly in Escherichia coli and characterize its structural properties. Ser4mer protein shows similar structure to native sericin and higher solubility than previously obtained recombinant sericin-like proteins. Recombinant production of a soluble sericin-like protein will significantly expand its applications as a biomaterial. In addition, recombinant production of silk proteins will allow us to understand sequence-structure relationships in these proteins.Conference Object Evaluation of Anti-Inflammatory Potential and Lc-ms/Ms Analysis of Different Standards(Wiley, 2018) Sözmen, Alper Baran; Canbay, E.; Yıldırım Sözmen, Eser; Övez, BikemStandardization of a LC-MS/MS method for phenolic compound content of biomass originated extracts was aimed in this study, Chlorella miniata extracts, which were cultivated solely for this study, were used for this purpose. The first step of the study was to compare external standard method, added standard method, and conventional standard method the qualitative identification of phenolic compounds of the extracts were performed by using LC-MS/MS system.