PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7645
Browse
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Airborne and Dust-Bound PBDEs Indoors and Outdoors in Izmir, Türkiye: A Multi-Route Exposure - Risk Assessment(Elsevier Sci Ltd, 2025) Genişoğlu, Mesut; Sofuoğlu, Aysun; Sofuoğlu, Sait Cemil; Turgut, Cafer; Sofuoglu, Sait C.; 01. Izmir Institute of Technology; 03. Faculty of Engineering; 03.02. Department of Chemical Engineering; 03.07. Department of Environmental EngineeringPhased-out flame retardants, e.g., polybrominated diphenyl ethers (PBDEs), persist in environmental media due to their resistance to degradation and ongoing emissions from PBDE containing materials and industrial activities. This study addresses a notable data gap in a unique setting, i.e., & Idot;zmir, T & uuml;rkiye, by investigating PBDE levels at homes, schools, and caf & eacute;/bar/restaurants, and assessing exposure and associated health risks. Indoor and outdoor air and dust samples were collected from rural, suburban, and urban areas. Exposure through ingestion, dermal absorption, and inhalation routes, and associated chronic-toxic and carcinogenic risks were estimated with Monte Carlo Simulation. Despite having been phase-out, house-dust Sigma BDE concentrations remained prevalent with average levels of >2000 ng/g in schools and homes, while outdoors they were <500 ng/g. BDE-209 was the predominant congener with an indoor air concentration of 486 pg/m(3) in schools and 56.7 pg/m(3) in homes. BDE-209 contributed 83.5-90.4 % of the indoor air Sigma BDE concentration in schools, while in homes this contribution ranged from 70.8 to 75.8 %. Aggregate exposure estimates show the predominant PBDE congener, BDE-209, was primarily exposed by accidental ingestion (58.6 %) followed by dermal absorption (21.9 %) and inhalation (19.5 %). Chronic-toxic risk (CTR, for BDE-47, BDE-99, BDE-153, and BDE-209) and carcinogenic risk (CR, for BDE-209) for the ingestion and dermal absorption routes indicated that house-dust and indoor-air PBDE exposures are not found to be considerable for human health. However, the contribution of inhalation route to the aggregate exposure of BDE-28, BDE-47, BDE-100, BDE-99 (87.0 %, 60.5 %, 54.3 %, and 57.3 %, respectively) may indicate the evermore PBDE exposure by inhalation for lower brominated congeners as they become more significant through environmental debromination of the predominant BDE-209.Article Citation - WoS: 2Citation - Scopus: 2Determination of Retrorsine in Thyme Via Molecularly Imprinted Electrochemical Sensor: Validation and Comparison With Chromatographic Technique(Elsevier Sci Ltd, 2025) Tunc-Ata, Melek; Akturk, Ezgi Zekiye; Njjar, Muath; Kaya, Ahmet; Akdogan, Abdullah; Onac, Canan; 01. Izmir Institute of TechnologyPyrrolizidine alkaloid (PA) toxicity is a growing public health concern, especially with rising herbal product use during the pandemic, highlighting the need for accurate exposure data. Retrorsine (RTS), a retronecine-based PA, is highly toxic, causing liver damage, mutagenicity, and DNA cross-linking through metabolic activation. In the light of the need for a practical alternative to monitor pyrrolizidine alkaloid contamination in herbal products, a molecularly-imprinted-polymer sensor (MIPs-GCE) was used for exploring the electrochemical behavior of RTS electrochemical behavior using cyclic voltammetry and the selective detection of RTS using square wave voltammetry. The sensor demonstrated a linear-detection range of 0.05-2 nM, with a LOD of 0.02869 nM. The sensor's accuracy was validated by analyzing thyme samples, detecting RTS concentrations of 0.5168 and0.5345 nM with RSD of 2.4 % and 1.9 %. These results closely aligned LC-MS/MS values of 0.5142 and 0.5267 nM, confirming the sensor's precision. The sensor demonstrated high selectivity, low detection limits, and practical applicability, ensuring reliable and efficient RTS detection in the presence of twenty-eight different PA compounds. This study introduces a novel, reliable, and straightforward method for detecting PAs, with a specific focus on RTS, offering an enhancement to existing analytical techniques and presenting a complementary alternative in chromatographic applications such as LC-MS/MS, HPLC and GC-MS.Article Citation - WoS: 2Citation - Scopus: 2Surface Sediments as a Sink and Risk Source for Legacy Pops During Waste Management Practices(Elsevier Sci Ltd, 2025) Demirtepe, Hale; Demirtepe, Hale; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyPersistent organic pollutants (POPs) such as polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) are globally recognized contaminants due to their persistence, bioaccumulative properties, and toxicity. Despite regulatory efforts, these compounds continue to enter the environment through improper waste management practices, including shipbreaking activities. This study investigates the PCB and PBDE contamination of marine sediments along a 30 km coastline in Aliaga, T & uuml;rkiye, involving one of the world's largest shipbreaking yards. Sixteen surface sediment samples were analyzed for 46 PCB and 23 PBDE congeners. The results revealed Sigma 46PCBs ranging from 5.17 to 4750 ng/g and Sigma 23PBDEs from non-detectable to 5053 ng/g. Shipbreaking activities exhibited the highest concentrations, while the sediments sampled close to beaches had the lowest POP contamination. Source apportionment using principal component analysis (PCA) identified distinct contamination patterns, associating higher-chlorinated PCBs with shipbreaking and lower-chlorinated PCBs and PBDEs with land-based industrial emissions and urban runoff. Ecological risk evaluation showed that most sediment samples exceeded sediment quality guidelines, with some PCB and PBDE congeners posing moderate to high risks to benthic ecosystems. Particularly, PCBs 28 and 52 exhibited low to high risk for almost all sediment samples. This study emphasizes the urgent need for improved waste management practices, particularly for POP-containing materials, to mitigate ecological risks. Shipbreaking yards are identified as hotspots for legacy POP contamination, necessitating international collaboration and stricter enforcement of environmental regulations as shipbreaking operations encompass cross-country transfer of wastes. Findings highlight the critical importance of remediation strategies to protect marine environments.