PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7645
Browse
Search Results
Now showing 1 - 10 of 45
Article Citation - WoS: 101Citation - Scopus: 105Defect-Engineering Agsbte2 With High Thermoelectric Performance(Wiley, 2023) Zhang, Yu; Li, Zhi; Singh, Saurabh; Nozariasbmarz, Amin; Li, Wenjie; Genç, Aziz; Xia, YiThermoelectric (TE) generators enable the direct and reversible conversion between heat and electricity, providing applications in both refrigeration and power generation. In the last decade, several TE materials with relatively high figures of merit (zT) have been reported in the low- and high-temperature regimes. However, there is an urgent demand for high-performance TE materials working in the mid-temperature range (400–700 K). Herein, p-type AgSbTe2 materials stabilized with S and Se co-doping are demonstrated to exhibit an outstanding maximum figure of merit (zTmax) of 2.3 at 673 K and an average figure of merit (zTave) of 1.59 over the wide temperature range of 300–673 K. This exceptional performance arises from an enhanced carrier density resulting from a higher concentration of silver vacancies, a vastly improved Seebeck coefficient enabled by the flattening of the valence band maximum and the inhibited formation of n-type Ag2Te, and ahighly improved stability beyond 673 K. The optimized material is used to fabricate a single-leg device with efficiencies up to 13.3% and a unicouple TE device reaching energy conversion efficiencies up to 12.3% at a temperature difference of 370 K. These results highlight an effective strategy to engineer high-performance TE material in the mid-temperature range.Article Citation - WoS: 21Citation - Scopus: 23Engineering of Xylanases for the Development of Biotechnologically Important Characteristics(Wiley, 2023) Sürmeli, Yusuf; Şanlı Mohamed, GülşahXylanases are the main biocatalysts used for the reduction of the xylan backbone from hemicellulose, randomly splitting off β-1,4-glycosidic linkages between xylopyranosyl residues. Xylanase market has been annually estimated at 500 million US Dollars and they are potentially used in broad industrial process ranges such as paper pulp biobleaching, xylo-oligosaccharide production, and biofuel manufacture from lignocellulose. The highly stable xylanases are preferred in the downstream procedure of industrial processes because they can tolerate severe conditions. Almost all native xylanases can not endure adverse conditions thus they are industrially not proper to be utilized. Protein engineering is a powerful technology for developing xylanases, which can effectively work in adverse conditions and can meet requirements for industrial processes. This study considered state-of-the-art strategies of protein engineering for creating the xylanase gene diversity, high-throughput screening systems toward upgraded traits of the xylanases, and the prediction and comprehensive analysis of the target mutations in xylanases by in silico methods. Also, key molecular factors have been elucidated for industrial characteristics (alkaliphilic enhancement, thermal stability, and catalytic performance) of GH11 family xylanases. The present review explores industrial characteristics improved by directed evolution, rational design, and semi-rational design as protein engineering approaches for pulp bleaching process, xylooligosaccharides production, and biorefinery & bioenergy production.Article Citation - WoS: 25Citation - Scopus: 38Biodiversity: the Overlooked Source of Human Health(Elsevier, 2023) Linhares, Yuliya; Kaganski, Alexander; Agyare, Christian; Aksan Kurnaz, Işıl; Neergheen, Vidushi; Kolodziejczyk, Bartlomiej; Baran, YusufBiodiversity is the measure of the variation of lifeforms in a given ecological system. Biodiversity provides ecosystems with the robustness, stability, and resilience that sustains them. This is ultimately essential for our survival because we depend on the services that natural ecosystems provide (food, fresh water, air, climate, and medicine). Despite this, human activity is driving an unprecedented rate of biodiversity decline, which may jeopardize the life-support systems of the planet if no urgent action is taken. In this article we show why biodiversity is essential for human health. We raise our case and focus on the biomedicine services that are enabled by biodiversity, and we present known and novel approaches to promote biodiversity conservation.Article Citation - WoS: 2Citation - Scopus: 2Tuning the Solid Phase Fluorescence Emission From Long Wavelength Visible To Near-Infrared in Oxazol-5 Derivatives: Structure–property Relationship, Theoretical and Experimental Studies(Springer, 2023) Nazlı, İbrahim Hanif; Yakalı, Gül; Topkaya, Derya; İzmirli, Merve; Uzun, Sema Demirci; Alp, SerapMost of the fluorescent molecules among organic π-conjugated materials show blue or green emission in the solid phase but few of them emit red-shifted visible and near-infrared light in the material science. To create molecules emitting for this feature, two π-conjugated oxazol-5-one derivatives containing donor (OCH3) and acceptor groups (NO2) were synthesized. Their optical and charge-transport properties were investigated through experimental and theoretical methods including the single crystal X-ray crystallography, Hirshfeld Surface Analysis, photophysical studies and Density Functional Theory (DFT), respectively. In addition, FT-IR, 1H-NMR, 13C-NMR spectroscopy, cyclic voltammetry (CV) measurements were performed. According to our results, both molecules may provide the significant pathway of development of long wavelength visible and red emissive features in solid phase with the aggregation induced enhanced emission (AIEE) properties particularly in the fields of OLEDs, optical communication, defence and bioimaging.Article Citation - WoS: 9Citation - Scopus: 9Fabrication and Development of a Microfluidic Paper-Based Immunosorbent Assay Platform (μpisa) for Colorimetric Detection of Hepatitis C(Royal Society of Chemistry, 2023) Özefe, Fatih; Arslan Yıldız, AhuPaper-based microfluidics is an emerging analysis tool used in various applications, especially in point-of-care (PoC) diagnostic applications, due to its advantages over other types of microfluidic devices in terms of simplicity in both production and operation, cost-effectiveness, rapid response time, low sample consumption, biocompatibility, and ease of disposal. Recently, various techniques have been developed and utilized for the fabrication of paper-based microfluidics, such as photolithography, micro-embossing, wax and PDMS printing, etc. In this study, we offer a fabrication methodology for a microfluidic paper-based immunosorbent assay (μPISA) platform and the detection of Hepatitis C Virus (HCV) was carried out to validate this platform. A laser ablation technique was utilized to form hydrophobic barriers easily and rapidly, which was the major advantage of the developed fabrication methodology. The characterization of the μPISA platform was performed in terms of micro-channel properties using bright-field (BF) microscopy, and surface properties using scanning electron microscopy (SEM). At the same time, sample volume and liquid handling capacity were analyzed quantitatively. Ablation speed (S) and laser power (P) were optimized, and it was shown that one combination (10P60S) provided minimal deviation in micro-channel dimensions and prevented deterioration of hydrophobic barriers. Also, the minimum hydrophobic barrier width, which prevents cross-barrier bleeding, was determined to be 255.92 ± 10.01 μm. Furthermore, colorimetric HCV NS3 detection was implemented to optimize and validate the μPISA platform. Here, HCV NS3 in both PBS and human blood plasma was successfully detected by the naked eye at concentrations as low as 1 ng mL−1 and 10 ng mL−1, respectively. Moreover, the limit of detection (LoD) values for HCV NS3 were acquired as 0.796 ng mL−1 in PBS and 2.203 ng mL−1 in human blood plasma with a turnaround time of 90 min. In comparison with conventional ELISA, highly sensitive and rapid HCV NS3 detection was accomplished colorimetrically on the developed μPISA platform.Article Citation - WoS: 11Citation - Scopus: 12Investigation of the Best Possible Methods for Wind Turbine Blade Waste Management by Using Gis and Fahp: Turkey Case(Springer, 2022) Öztürk, Samet; Karipoğlu, FatihThe aim of this study is to present the status and projections of wind turbine blade retirement in Turkey; to investigate the number of retiring WT blades in the regional, manufacturer, and material aspects; and to discuss the management methods for retired WT blades. To determine the best possible wind turbine blade waste management methods for Turkey, a combined application of Geographical Information Systems (GIS) and the Fuzzy Analytical Hierarchy Process (FAHP) is used in this study. It is found that around nine thousand WT blades will become waste between 2020 and 2039 in Turkey, corresponding to around 80,500 tons of waste. On average, 52,325 tons of glass/carbon and 28,175 tons of polymers will be accumulated between 2020 and 2039 from wind turbine blades. More than half of the WT blade waste will come from two WT manufacturers, namely, Enercon and Nordex. Aegean and Marmara regions will provide 74% of the blade waste, where 33% of them will be 2 MW and 2.5 MW sizes of WT blades. Furthermore, a case study is applied to Izmir city to demonstrate the results of FAHP for finding the best available method to dispose of WT blades. The results show that using blade waste as filling material is the best alternative, while waste-to-energy is the last favorable option for blade waste management. Finally, sensitivity analyses are applied to demonstrate the robustness of the results for the inclusion of new alternatives and the bias of experts’ judgments.Article Citation - WoS: 11Citation - Scopus: 10Redefining methods for augmenting lactic acid bacteria robustness and phenyllactic acid biocatalysis: Integration valorizes simplicity(Taylor & Francis, 2022) Meruvu, HarithaThe production of phenyllactic acid (PLA) has been reported by several researchers, but so far, no mention has been made of augmented PLA production using an orchestrated assembly of simple techniques integrated to improve lactic acid bacteria (LAB) metabolism for the same. This review summarizes sequentially tailoring LAB growth and metabolism for augmented PLA catalysis through several strategies like monitoring LAB sustenance by choosing appropriate starter PLA-producing LAB strains isolated from natural environments, with desirably fastidious growth rates, properties like acidification, proteolysis, bacteriophage-resistance, aromatic/texturing-features, etc.; entrapping chosen LAB strains in novel cryogels and/or co-cultivating two/more LAB strains to improve their biotransformation potential and promote growth dependency/sustainability; adopting adaptive evolution methods designed to improve LAB strains under selection pressure inducing desired phenotypes tolerant to stress factors like heat, salt, acid, and solvent; monitoring physico-chemical LAB fermentation factors like temperature, pH, dissolved oxygen content, enzymes, and cofactors for PLA biosynthesis; and modulating purification/downstream processes to extract substantial PLA yields. This review paper serves as a comprehensive preliminary guide that can evoke a strategic experimental plan to produce industrial-scale PLA yields using simple techniques orchestrated together in the pursuit of conserving time, effort, and resources.Article Citation - WoS: 14Citation - Scopus: 18The use of video clickstream data to predict university students’ test performance: A comprehensive educational data mining approach(Springer, 2022) Yürüm, Ozan Raşit; Taşkaya Temizel, Tuğba; Yıldırım, SonerVideo clickstream behaviors such as pause, forward, and backward offer great potential for educational data mining and learning analytics since students exhibit a significant amount of these behaviors in online courses. The purpose of this study is to investigate the predictive relationship between video clickstream behaviors and students’ test performance with two consecutive experiments. The first experiment was performed as an exploratory study with 22 university students using a single test performance measure and basic statistical techniques. The second experiment was performed as a conclusive study with 16 students using repeated measures and comprehensive data mining techniques. The findings show that a positive correlation exists between the total number of clicks and students’ test performance. Those students who performed a high number of clicks, slow backward speed or doing backwards or pauses achieved better test performance than those who performed a lower number of clicks, or who used fast-backward or fast-forward. In addition, students’ test performance could be predicted using video clickstream data with a good level of accuracy (Root Mean Squared Error Percentage (%RMSE) ranged between 15 and 20). Furthermore, the mean of backward speed, number of pauses, and number/percentage of backwards were found to be the most important indicators in predicting students’ test performance. These findings may help educators or researchers identify students who are at risk of failure. Finally, the study provides design suggestions based on the findings for the preparation of video-based lectures.Article Citation - WoS: 3Citation - Scopus: 3Structural and Functional Analyses of Gh51 Alpha-L of Geobacillus Vulcani Gs90 Reveal Crucial Residues for Catalytic Activity and Thermostability(Wiley, 2022) Sürmeli, Yusuf; Şanlı Mohamed, GülşahAlpha-L-arabinofuranosidase (Abf) is of big interest in various industrial areas. Directed evolution is a powerful strategy to identify significant residues underlying Abf properties. Here, six active variants from GH51 Abf of Geobacillus vulcani GS90 (GvAbf) by directed evolution were overproduced, extracted, and analyzed at biochemical and structural levels. According to the activity and thermostability results, the most-active and the least-active variants were found as GvAbf51 and GvAbf52, respectively. GvAbf63 variant was more active than parent GvAbf by 20% and less active than GvAbf51. Also, the highest thermostability belonged to GvAbf52 with 80% residual activity after 1 h. Comparative sequence and structure analyses revealed that GvAbf51 possessed L307S displacement. Thus, this study suggested that L307 residue may be critical for GvAbf activity. GvAbf63 had H30D, Q90H, and L307S displacements, and H30 was covalently bound to E29 catalytic residue. Thus, H30D may decrease the positive effect of L307S on GvAbf63 activity, preventing E29 action. Besides, GvAbf52 possessed S215N, L307S, H473P, and G476C substitutions and S215 was close to E175 (acid–base residue). S215N may partially disrupt E175 action. Overall effect of all substitutions in GvAbf52 may result in the formation of the C–C bond between C171 and C213 by becoming closer to each other.Article Citation - WoS: 1Citation - Scopus: 1Exploring the Heterogeneity of Ige-Mediated Food Allergy Through Latent Class Analysis(S. Karger AG, 2022) Akarsu, Ayşegül; Öksel Karakuş, Ceyda; Ocak, Melike; Oral, Nihan; Bilgi, Eyüp; Şahiner, Ümit Murat; Soyer, Özge; Şekerel, Bülent EnisIntroduction: Food allergy (FA) is a heterogeneous disease with multiple morbidities and a huge burden for patients and healthcare systems. Variable manifestations, comorbidities (atopic dermatitis [AD], asthma, and/or allergic rhinitis [AR]), severity (anaphylaxis), and outcomes suggest the existence of different endotypes that cluster analyses may reveal. In this study, we aimed to investigate distinct subgroups among patients with FAs using data from 524 children/adolescents. Methods: 524 patients with IgE-mediated FA (353 male [67%]; median age 4.4 years [IQR:3.0-6.8]), 354 (68%) had multiple FA. The history of AD, asthma, AR, and anaphylaxis was recorded in 59.4%, 35.5%, 24.2%, and 51.2% of the patients, respectively. Latent class analysis was carried out to distinguish clinical FA phenotypes using five potential markers of allergy severity (single/multiple FA, never/inactive/current asthma and AD, AR, and anaphylaxis). Results: Three distinct phenotypes were identified: (1) multiple FA with eczema and respiratory multimorbidity (42%), (2) multiple FA with persistent eczema (34%), and (3) single FA with respiratory multimorbidity without eczema (24%). Compared with the single FA cluster, the prevalence of AD was significantly higher in multiple FA groups. Cluster 1 had the highest frequency of AR and allergic asthma, and the lowest rate of total tolerance of FA. Discussion: We put forward the hypothesis of underlying pathogenesis according to the clinical phenotypes. While skin barrier defect may play a dominant role in the pathogenesis in Cluster 2, immune dysregulation may be dominant in Cluster 3. In Cluster 1, the most severe group, a combination of both skin barrier defects and immune dysregulation may be responsible for the clinical features.