PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7645
Browse
7 results
Search Results
Now showing 1 - 7 of 7
Review Citation - WoS: 23Citation - Scopus: 24Microfluidic-Based Technologies for Diagnosis, Prevention, and Treatment of Covid-19: Recent Advances and Future Directions(Springer, 2023) Tarım, Ergün Alperay; Anıl İnevi, Müge; Özkan, İlayda; Keçili, Seren; Bilgi, Eyüp; Başlar, Muhammet Semih; Özçivici, Engin; Öksel Karakuş, Ceyda; Tekin, Hüseyin CumhurThe COVID-19 pandemic has posed significant challenges to existing healthcare systems around the world. The urgent need for the development of diagnostic and therapeutic strategies for COVID-19 has boomed the demand for new technologies that can improve current healthcare approaches, moving towards more advanced, digitalized, personalized, and patient-oriented systems. Microfluidic-based technologies involve the miniaturization of large-scale devices and laboratory-based procedures, enabling complex chemical and biological operations that are conventionally performed at the macro-scale to be carried out on the microscale or less. The advantages microfluidic systems offer such as rapid, low-cost, accurate, and on-site solutions make these tools extremely useful and effective in the fight against COVID-19. In particular, microfluidic-assisted systems are of great interest in different COVID-19-related domains, varying from direct and indirect detection of COVID-19 infections to drug and vaccine discovery and their targeted delivery. Here, we review recent advances in the use of microfluidic platforms to diagnose, treat or prevent COVID-19. We start by summarizing recent microfluidic-based diagnostic solutions applicable to COVID-19. We then highlight the key roles microfluidics play in developing COVID-19 vaccines and testing how vaccine candidates perform, with a focus on RNA-delivery technologies and nano-carriers. Next, microfluidic-based efforts devoted to assessing the efficacy of potential COVID-19 drugs, either repurposed or new, and their targeted delivery to infected sites are summarized. We conclude by providing future perspectives and research directions that are critical to effectively prevent or respond to future pandemics.Article Citation - WoS: 24Citation - Scopus: 30Hologlev: a Hybrid Magnetic Levitation Platform Integrated With Lensless Holographic Microscopy for Density-Based Cell Analysis(American Chemical Society, 2021) Delikoyun, Kerem; Yaman, Sena; Yılmaz, Esra; Sarıgil, Öykü; Anıl İnevi, Müge; Telli, Kübra; Yalçın Özuysal, ÖzdenIn clinical practice, a variety of diagnostic applications require the identification of target cells. Density has been used as a physical marker to distinguish cell populations since metabolic activities could alter the cell densities. Magnetic levitation offers great promise for separating cells at the single cell level within heterogeneous populations with respect to cell densities. Traditional magnetic levitation platforms need bulky and precise optical microscopes to visualize levitated cells. Moreover, the evaluation process of cell densities is cumbersome, which also requires trained personnel for operation. In this work, we introduce a device (HologLev) as a fusion of the magnetic levitation principle and lensless digital inline holographic microscopy (LDIHM). LDIHM provides ease of use by getting rid of bulky and expensive optics. By placing an imaging sensor just beneath the microcapillary channel without any lenses, recorded holograms are processed for determining cell densities through a fully automated digital image processing scheme. The device costs less than $100 and has a compact design that can fit into a pocket. We perform viability tests on the device by levitating three different cell lines (MDA-MB-231, U937, D1 ORL UVA) and comparing them against their dead correspondents. We also tested the differentiation of mouse osteoblastic (7F2) cells by monitoring characteristic variations in their density. Last, the response of MDA-MB-231 cancer cells to a chemotherapy drug was demonstrated in our platform. HologLev provides cost-effective, label-free, fully automated cell analysis in a compact design that could be highly desirable for laboratory and point-of-care testing applications.Book Part Citation - Scopus: 15Stem Cell Culture Under Simulated Microgravity(Springer, 2020) Anıl İnevi, Müge; Sarıgil, Öykü; Kızılkaya, Melike; Meşe, Gülistan; Tekin, Hüseyin Cumhur; Özçivici, EnginChallenging environment of space causes several pivotal alterations in living systems, especially due to microgravity. The possibility of simulating microgravity by ground-based systems provides research opportunities that may lead to the understanding of in vitro biological effects of microgravity by eliminating the challenges inherent to spaceflight experiments. Stem cells are one of the most prominent cell types, due to their self-renewal and differentiation capabilities. Research on stem cells under simulated microgravity has generated many important findings, enlightening the impact of microgravity on molecular and cellular processes of stem cells with varying potencies. Simulation techniques including clinostat, random positioning machine, rotating wall vessel and magnetic levitation-based systems have improved our knowledge on the effects of microgravity on morphology, migration, proliferation and differentiation of stem cells. Clarification of the mechanisms underlying such changes offers exciting potential for various applications such as identification of putative therapeutic targets to modulate stem cell function and stem cell based regenerative medicine. © Springer Nature Switzerland AG 2020.Article Citation - WoS: 14Citation - Scopus: 15Development and Verification of a Three-Dimensional (3d) Breast Cancer Tumor Model Composed of Circulating Tumor Cell (ctc) Subsets(Springer, 2020) Anıl İnevi, Müge; Sağlam Metiner, Pelin; Kabak, Evrim Ceren; Gülce İz, SultanBreast cancer is one of the most common cancer types among women in which early tumor invasion leads to metastases and death. EpCAM (epithelial cellular adhesion molecule) and HER2 (human epidermal growth factor receptor 2) are two main circulating tumor cell (CTC) subsets in HER2+ breast cancer patients. In this regard, the main aim of this study is to develop and characterize a three-dimensional (3D) breast cancer tumor model composed of CTC subsets to evaluate new therapeutic strategies and drugs. For this reason, EpCAM(+) and HER2(+) sub-populations were isolated from different cell lines to establish 3D tumor model that mimics in situ (in vivo) more closely than two-dimensional (2D) models. EpCAM(+)/HER2(+) cells had a high proliferation rate and low tendency to attach to the surface in comparison with parental MDA-MB-453 cells as CTC subsets. Aggressive breast cancer subpopulations cultured in 3D porous chitosan scaffold had enhanced cell-cell and cell-matrix interactions compared to 2D cultured cells and these 3D models showed more aggressive morphology and behavior, expressed higher levels of pluripotency marker genes, Nanog, Sox2 and Oct4. For the verification of the 3D model, the effects of doxorubicin which is a chemotherapeutic agent used in breast cancer treatment were examined and increased drug resistance was determined in 3D cultures. The 3D tumor model comprising EpCAM(+)/HER2(+) CTC subsets developed in this study has a promising potential to be used for investigation of an aggressive CTC microenvironment in vitro that mimics in vivo characteristics to test new drug candidates against CTCs.Article Citation - WoS: 79Citation - Scopus: 93Magnetic Force-Based Micro Fluidic Techniques for Cellular and Tissue Bioengineering(Frontiers Media S.A., 2018) Yaman, Sena; Anıl İnevi, Müge; Özçivici, Engin; Tekin, Hüseyin CumhurLive cell manipulation is an important biotechnological tool for cellular and tissue level bioengineering applications due to its capacity for guiding cells for separation, isolation, concentration, and patterning. Magnetic force-based cell manipulation methods offer several advantages, such as low adverse effects on cell viability and low interference with the cellular environment. Furthermore, magnetic-based operations can be readily combined with microfluidic principles by precisely allowing control over the spatiotemporal distribution of physical and chemical factors for cell manipulation. In this review, we present recent applications of magnetic force-based cell manipulation in cellular and tissue bioengineering with an emphasis on applications with microfluidic components. Following an introduction of the theoretical background of magnetic manipulation, components of magnetic force-based cell manipulation systems are described. Thereafter, different applications, including separation of certain cell fractions, enrichment of rare cells, and guidance of cells into specific macro- or micro-arrangements to mimic natural cell organization and function, are explained. Finally, we discuss the current challenges and limitations of magnetic cell manipulation technologies in microfluidic devices with an outlook on future developments in the field.Article Citation - WoS: 79Citation - Scopus: 94Biofabrication of in Situ Self Assembled 3d Cell Cultures in a Weightlessness Environment Generated Using Magnetic Levitation(Nature Publishing Group, 2018) Anıl İnevi, Müge; Yaman, Sena; Arslan Yıldız, Ahu; Meşe, Gülistan; Yalçın Özuysal, Özden; Tekin, Hüseyin Cumhur; Özçivici, EnginMagnetic levitation though negative magnetophoresis is a novel technology to simulate weightlessness and has recently found applications in material and biological sciences. Yet little is known about the ability of the magnetic levitation system to facilitate biofabrication of in situ three dimensional (3D) cellular structures. Here, we optimized a magnetic levitation though negative magnetophoresis protocol appropriate for long term levitated cell culture and developed an in situ 3D cellular assembly model with controlled cluster size and cellular pattern under simulated weightlessness. The developed strategy outlines a potential basis for the study of weightlessness on 3D living structures and with the opportunity for real-time imaging that is not possible with current ground-based simulated weightlessness techniques. The low-cost technique presented here may offer a wide range of biomedical applications in several research fields, including mechanobiology, drug discovery and developmental biology.Article Citation - WoS: 6Citation - Scopus: 7A Biodesign Approach To Obtain High Yields of Biosimilars by Anti-Apoptotic Cell Engineering: A Case Study To Increase the Production Yield of Anti-Tnf Alpha Producing Recombinant Cho Cells(Humana Press, 2018) Gülce İz, Sultan; Anıl İnevi, Müge; Sağlam Metiner, Pelin; Ayyıldız Tamiş, Duygu; Kisbet, NazlıRecent developments in medical biotechnology have facilitated to enhance the production of monoclonal antibodies (mAbs) and recombinant proteins in mammalian cells. Human mAbs for clinical applications have focused on three areas, particularly cancer, immunological disorders, and infectious diseases. Tumor necrosis factor alpha (TNF-α), which has both proinflammatory and immunoregulatory functions, is an important target in biopharmaceutical industry. In this study, a humanized anti-TNF-α mAb producing stable CHO cell line which produces a biosimilar of Humira (adalimumab) was used. Adalimumab is a fully human anti-TNF mAb among the top-selling mAb products in recent years as a biosimilar. Products from mammalian cell bioprocesses are a derivative of cell viability and metabolism, which is mainly disrupted by cell death in bioreactors. Thus, different strategies are used to increase the product yield. Suppression of apoptosis, also called anti-apoptotic cell engineering, is the most remarkable strategy to enhance lifetime of cells for a longer production period. In fact, using anti-apoptotic cell engineering as a BioDesign approach was inspired by nature; nature gives prolonged life span to some cells like stem cells, tumor cells, and memory B and T cells, and researchers have been using this strategy for different purposes. In this study, as a biomimicry approach, anti-apoptotic cell engineering was used to increase the anti-TNF-α mAb production from the humanized anti-TNF-α mAb producing stable CHO cell line by Bcl-xL anti-apoptotic protein. It was shown that transient transfection of CHO cells by the Bcl-xL anti-apoptotic protein expressing plasmid prolonged the cell survival rate and protected cells from apoptosis. The transient expression of Bcl-xL using CHO cells enhanced the anti-TNF-α production. The production of anti-TNF-α in CHO cells was increased up to 215 mg/L with an increase of 160% after cells were transfected with Bcl-xL expressing plasmid with polyethylenimine (PEI) reagent at the ratio of 1:6 (DNA:PEI). In conclusion, the anti-apoptotic efficacy of the Bcl-xL expressing plasmid in humanized anti-TNF-α MAb producing stable CHO cells is compatible with curative effect for high efficiency recombinant protein production. Thus, this model can be used for large-scale production of biosimilars through transient Bcl-xL gene expression as a cost-effective method.