PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7645
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 13Citation - Scopus: 13Genetic and Tissue Level Muscle-Bone Interactions During Unloading and Reambulation(International Society of Musculoskeletal and Neuronal Interactions, 2016) Judex, Stefan; Zhang, Weidong; Donahue, Leah Rae; Özçivici, EnginLittle is known about interactions between muscle and bone during the removal and application of mechanical signals. Here, we applied 3wk of hindlimb unloading followed by 3wk of reambulation to a genetically heterogeneous population of 352 adult mice and tested the hypothesis that changes in muscle are associated with changes in bone at the level of the tissue and the genome. During unloading and relative to normally ambulating control mice, most mice lost muscle and cortical bone with large variability across the population. During reambulation, individual mice regained bone and muscle at different rates. Across mice, changes in muscle and trabecular/cortical bone were not correlated to each other during unloading or reambulation. For unloading, we found one significant quantitative trait locus (QTL) for muscle area and five QTLs for cortical bone without overlap between mechano-sensitive muscle and cortical bone QTLs (but some overlap between muscle and trabecular QTLs). The low correlations between morphological changes in muscle and bone, together with the largely distinct genetic regulation of the response indicate that the premise of a muscle-bone unit that co-adjusts its size during (un)loading may need to be reassessed. © 2016, International Society of Musculoskeletal and Neuronal Interactions. All rights reserved.Article Citation - WoS: 25Citation - Scopus: 27Trabecular Bone Recovers From Mechanical Unloading Primarily by Restoring Its Mechanical Function Rather Than Its Morphology(Elsevier Ltd., 2014) Özçivici, Engin; Judex, StefanUpon returning to normal ambulatory activities, the recovery of trabecular bone lost during unloading is limited. Here, using a mouse population that displayed a large range of skeletal susceptibility to unloading and reambulation, we tested the impact of changes in trabecular bone morphology during unloading and reambulation on its simulated mechanical properties. Female adult mice from a double cross of BALB/cByJ and C3H/HeJ strains (n = 352) underwent 3. wk of hindlimb unloading followed by 3. wk of reambulation. Normally ambulating mice served as controls (n = 30). As quantified longitudinally by in vivo μCT, unloading led to an average loss of 43% of trabecular bone volume fraction (BV/TV) in the distal femur. Finite element models of the μCT tomographies showed that deterioration of the trabecular structure raised trabecular peak Von-Mises (PVM) stresses on average by 27%, indicating a significant increase in the risk of mechanical failure compared to baseline. Further, skewness of the Von-Mises stress distributions (SVM) increased by 104% with unloading, indicating that the trabecular structure became inefficient in resisting the applied load. During reambulation, bone of experimental mice recovered on average only 10% of its lost BV/TV. Even though the addition of trabecular tissue was small during reambulation, PVM and SVM as indicators of risk of mechanical failure decreased by 56% and 57%, respectively. Large individual differences in the response of trabecular bone, together with a large sample size, facilitated stratification of experimental mice based on the level of recovery. As a fraction of all mice, 66% of the population showed some degree of recovery in BV/TV while in 89% and 87% of all mice, PVM and SVM decreased during reambulation, respectively. At the end of the reambulation phase, only 8% of the population recovered half of the unloading induced losses in BV/TV while 50% and 49% of the population recovered half of the unloading induced deterioration in PVM and SVM, respectively. The association between morphological and mechanical variables was strong at baseline but progressively decreased during the unloading and reambulation cycles. The preferential recovery of trabecular micromechanical properties over bone volume fraction emphasizes that mechanical demand during reambulation does not, at least initially, seek to restore bone's morphology but its mechanical integrity.Article Citation - WoS: 8Citation - Scopus: 9Quantitative Trait Loci That Modulate Trabecular Bone's Risk of Failure During Unloading and Reloading(Elsevier Ltd., 2014) Özçivici, Engin; Zhang, Weidong; Donahue, Leah Rae; Judex, StefanGenetic makeup of an individual is a strong determinant of the morphologic and mechanical properties of bone. Here, in an effort to identify quantitative trait loci (QTLs) for changes in the simulated mechanical parameters of trabecular bone during altered mechanical demand, we subjected 352. second generation female adult (16. weeks old) BALBxC3H mice to 3. weeks of hindlimb unloading followed by 3. weeks of reambulation. Longitudinal in vivo microcomputed tomography (μCT) scans tracked trabecular changes in the distal femur. Tomographies were directly translated into finite element (FE) models and subjected to a uniaxial compression test. Apparent trabecular stiffness and components of the Von Mises (VM) stress distributions were computed for the distal metaphysis and associated with QTLs. At baseline, five QTLs explained 20% of the variation in trabecular peak stresses across the mouse population. During unloading, three QTLs accounted for 14% of the variability in peak stresses. During reambulation, one QTL accounted for 5% of the variability in peak stresses. QTLs were also identified for mechanically induced changes in stiffness, median stress values and skewness of stress distributions. There was little overlap between QTLs identified for baseline and QTLs for longitudinal changes in mechanical properties, suggesting that distinct genes may be responsible for the mechanical response of trabecular bone. Unloading related QTLs were also different from reambulation related QTLs. Further, QTLs identified here for mechanical properties differed from previously identified QTLs for trabecular morphology, perhaps revealing novel gene targets for reducing fracture risk in individuals exposed to unloading and for maximizing the recovery of trabecular bone's mechanical properties during reambulation.Article Citation - WoS: 57Citation - Scopus: 61Viewpoints: Feeding Mechanics, Diet, and Dietary Adaptations in Early Hominins(John Wiley and Sons Inc., 2013) Daegling, David J.; Judex, Stefan; Özçivici, Engin; Ravosa, Matthew J.; Taylor, Andrea B.; Grine, Frederick E.; Teaford, Mark F.; Ungar, Peter S.Inference of feeding adaptation in extinct species is challenging, and reconstructions of the paleobiology of our ancestors have utilized an array of analytical approaches. Comparative anatomy and finite element analysis assist in bracketing the range of capabilities in taxa, while microwear and isotopic analyses give glimpses of individual behavior in the past. These myriad approaches have limitations, but each contributes incrementally toward the recognition of adaptation in the hominin fossil record. Microwear and stable isotope analysis together suggest that australopiths are not united by a single, increasingly specialized dietary adaptation. Their traditional (i.e., morphological) characterization as "nutcrackers" may only apply to a single taxon, Paranthropus robustus. These inferences can be rejected if interpretation of microwear and isotopic data can be shown to be misguided or altogether erroneous. Alternatively, if these sources of inference are valid, it merely indicates that there are phylogenetic and developmental constraints on morphology. Inherently, finite element analysis is limited in its ability to identify adaptation in paleobiological contexts. Its application to the hominin fossil record to date demonstrates only that under similar loading conditions, the form of the stress field in the australopith facial skeleton differs from that in living primates. This observation, by itself, does not reveal feeding adaptation. Ontogenetic studies indicate that functional and evolutionary adaptation need not be conceptually isolated phenomena. Such a perspective helps to inject consideration of mechanobiological principles of bone formation into paleontological inferences. Finite element analysis must employ such principles to become an effective research tool in this context. © 2013 Wiley Periodicals, Inc.Article Citation - WoS: 18Citation - Scopus: 21Genetic Loci That Control the Loss and Regain of Trabecular Bone During Unloading and Reambulation(John Wiley and Sons Inc., 2013) Judex, Stefan; Zhang, Weidong; Donahue, Leah Rae; Özçivici, EnginChanges in trabecular morphology during unloading and reloading are marked by large variations between individuals, implying that there is a strong genetic influence on the magnitude of the response. Here, we subjected more than 350 second-generation (BALBxC3H) 4-month-old adult female mice to 3 weeks of hindlimb unloading followed by 3 weeks of reambulation to identify the quantitative trait loci (QTLs) that define an individual's propensity to either lose trabecular bone when weight bearing is removed or to gain trabecular bone when weight bearing is reintroduced. Longitudinal in vivo micro-computed tomography (μCT) scans demonstrated that individual mice lost between 15% and 71% in trabecular bone volume fraction (BV/TV) in the distal femur during unloading (average: -43%). Changes in trabecular BV/TV during the 3-week reambulation period ranged from a continuation of bone loss (-18%) to large additions (56%) of tissue (average: +10%). During unloading, six QTLs accounted for 21% of the total variability in changes in BV/TV whereas one QTL accounted for 6% of the variability in changes in BV/TV during reambulation. QTLs were also identified for changes in trabecular architecture. Most of the QTLs defining morphologic changes during unloading or reambulation did not overlap with those QTLs identified at baseline, suggesting that these QTLs harbor genes that are specific for sensing changes in the levels of weight bearing. The lack of overlap in QTLs between unloading and reambulation also emphasizes that the genes modulating the trabecular response to unloading are distinct from those regulating tissue recovery during reloading. The identified QTLs contain the regulatory genes underlying the strong genetic regulation of trabecular bone's sensitivity to weight bearing and may help to identify individuals that are most susceptible to unloading-induced bone loss and/or the least capable of recovering.