PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7645

Browse

Search Results

Now showing 1 - 10 of 16
  • Article
    Citation - WoS: 3
    Citation - Scopus: 4
    Biopatterning of 3d Cellular Model by Contactless Magnetic Manipulation for Cardiotoxicity Screening
    (Mary Ann Liebert, Inc, 2023) Önbaş, Rabia; Arslan Yıldız, Ahu
    Patterning cells to create three-dimensional (3D) cell culture models by magnetic manipulation is a promising technique, which is rapid, simple, and cost-effective. This study introduces a new biopatterning approach based on magnetic manipulation of cells with a bioink that consists alginate, cells, and magnetic nanoparticles. Plackett-Burman and Box-Behnken experimental design models were used to optimize bioink formulation where NIH-3T3 cells were utilized as a model cell line. The patterning capability was confirmed by light microscopy through 7 days culture time. Then, biopatterned 3D cardiac structures were formed using H9c2 cardiomyocyte cells. Cellular and extracellular components, F-actin and collagen Type I, and cardiac-specific biomarkers, Troponin T and MYH6, of biopatterned 3D cardiac structures were observed successfully. Moreover, Doxorubicin (DOX)-induced cardiotoxicity was investigated for developed 3D model, and IC50 value was calculated as 8.1 μM for biopatterned 3D cardiac structures, which showed higher resistance against DOX-exposure compared to conventional two-dimensional cell culture. Hereby, developed biopatterning methodology proved to be a simple and rapid approach to fabricate 3D cardiac models, especially for drug screening applications. Copyright 2023, Mary Ann Liebert, Inc., publishers.
  • Article
    Citation - WoS: 6
    Citation - Scopus: 6
    Diagnosis of Ruminant Viral Diseases With Loop-Mediated Isothermal Amplification
    (Springer, 2023) Ayaz Kök, Sanem; Üstün, Selcen; Taşkent, Hümeyra
    Infectious diseases in livestock industry are major problems for animal health, food safety, and the economy. Zoonotic diseases from farm animals are significant threat to human population as well. These are notifiable diseases listed by the World Organization for Animal Health (OIE). Rapid diagnostic methods can help keep infectious diseases under control in herds. Loop-mediated isothermal amplification (LAMP) is a simple and rapid nucleic acid amplification method that is studied widely for detection of many infectious diseases in the field. LAMP allows biosensing of target DNA or RNA under isothermal conditions with high specificity in a short period of time. An untrained user can analyze results based on color change or turbidity. Here we review LAMP assays to diagnose OIE notifiable ruminant viral diseases in literature highlighting properties of LAMP method considering what is expected from an efficient, field usable diagnostic test.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 3
    Structural and Functional Analyses of Gh51 Alpha-L of Geobacillus Vulcani Gs90 Reveal Crucial Residues for Catalytic Activity and Thermostability
    (Wiley, 2022) Sürmeli, Yusuf; Şanlı Mohamed, Gülşah
    Alpha-L-arabinofuranosidase (Abf) is of big interest in various industrial areas. Directed evolution is a powerful strategy to identify significant residues underlying Abf properties. Here, six active variants from GH51 Abf of Geobacillus vulcani GS90 (GvAbf) by directed evolution were overproduced, extracted, and analyzed at biochemical and structural levels. According to the activity and thermostability results, the most-active and the least-active variants were found as GvAbf51 and GvAbf52, respectively. GvAbf63 variant was more active than parent GvAbf by 20% and less active than GvAbf51. Also, the highest thermostability belonged to GvAbf52 with 80% residual activity after 1 h. Comparative sequence and structure analyses revealed that GvAbf51 possessed L307S displacement. Thus, this study suggested that L307 residue may be critical for GvAbf activity. GvAbf63 had H30D, Q90H, and L307S displacements, and H30 was covalently bound to E29 catalytic residue. Thus, H30D may decrease the positive effect of L307S on GvAbf63 activity, preventing E29 action. Besides, GvAbf52 possessed S215N, L307S, H473P, and G476C substitutions and S215 was close to E175 (acid–base residue). S215N may partially disrupt E175 action. Overall effect of all substitutions in GvAbf52 may result in the formation of the C–C bond between C171 and C213 by becoming closer to each other.
  • Article
    Citation - WoS: 1
    Citation - Scopus: 1
    Exploring the Heterogeneity of Ige-Mediated Food Allergy Through Latent Class Analysis
    (S. Karger AG, 2022) Akarsu, Ayşegül; Öksel Karakuş, Ceyda; Ocak, Melike; Oral, Nihan; Bilgi, Eyüp; Şahiner, Ümit Murat; Soyer, Özge; Şekerel, Bülent Enis
    Introduction: Food allergy (FA) is a heterogeneous disease with multiple morbidities and a huge burden for patients and healthcare systems. Variable manifestations, comorbidities (atopic dermatitis [AD], asthma, and/or allergic rhinitis [AR]), severity (anaphylaxis), and outcomes suggest the existence of different endotypes that cluster analyses may reveal. In this study, we aimed to investigate distinct subgroups among patients with FAs using data from 524 children/adolescents. Methods: 524 patients with IgE-mediated FA (353 male [67%]; median age 4.4 years [IQR:3.0-6.8]), 354 (68%) had multiple FA. The history of AD, asthma, AR, and anaphylaxis was recorded in 59.4%, 35.5%, 24.2%, and 51.2% of the patients, respectively. Latent class analysis was carried out to distinguish clinical FA phenotypes using five potential markers of allergy severity (single/multiple FA, never/inactive/current asthma and AD, AR, and anaphylaxis). Results: Three distinct phenotypes were identified: (1) multiple FA with eczema and respiratory multimorbidity (42%), (2) multiple FA with persistent eczema (34%), and (3) single FA with respiratory multimorbidity without eczema (24%). Compared with the single FA cluster, the prevalence of AD was significantly higher in multiple FA groups. Cluster 1 had the highest frequency of AR and allergic asthma, and the lowest rate of total tolerance of FA. Discussion: We put forward the hypothesis of underlying pathogenesis according to the clinical phenotypes. While skin barrier defect may play a dominant role in the pathogenesis in Cluster 2, immune dysregulation may be dominant in Cluster 3. In Cluster 1, the most severe group, a combination of both skin barrier defects and immune dysregulation may be responsible for the clinical features.
  • Article
    Citation - WoS: 25
    Citation - Scopus: 30
    Fabrication of 3d Printed Poly(lactic Acid) Strut and Wet-Electrospun Cellulose Nano Fiber Reinforced Chitosan-Collagen Hydrogel Composite Scaffolds for Meniscus Tissue Engineering
    (SAGE Publications, 2022) Güneş, Oylum Çolpankan; Kara, Aylin; Baysan, Gizem; Hüsemoğlu, Reşit Buğra; Akokay, Pınar; Ziylan Albayrak, Aylin; Ergür, Bekir Uğur; Havitçioğlu, Hasan
    The main goal of the study was to produce chitosan-collagen hydrogel composite scaffolds consisting of 3D printed poly(lactic acid) (PLA) strut and nanofibrous cellulose for meniscus cartilage tissue engineering. For this purpose, first PLA strut containing microchannels was incorporated into cellulose nanofibers and then they were embedded into chitosan-collagen matrix to obtain micro- and nano-sized topographical features for better cellular activities as well as mechanical properties. All the hydrogel composite scaffolds produced by using three different concentrations of genipin (0.1, 0.3, and 0.5%) had an interconnected microporous structure with a swelling ratio of about 400% and water content values between 77 and 83% which is similar to native cartilage extracellular matrix. The compressive strength of all the hydrogel composite scaffolds was found to be similar (∼32 kPa) and suitable for cartilage tissue engineering applications. Besides, the hydrogel composite scaffold comprising 0.3% (w/v) genipin had the highest tan δ value (0.044) at a frequency of 1 Hz which is around the walking frequency of a person. According to the in vitro analysis, this hydrogel composite scaffold did not show any cytotoxic effect on the rabbit mesenchymal stem cells and enabled cells to attach, proliferate and also migrate through the inner area of the scaffold. In conclusion, the produced hydrogel composite scaffold holds great promise for meniscus tissue engineering.
  • Article
    Citation - WoS: 14
    Citation - Scopus: 14
    Development of Biological Meniscus Scaffold: Decellularization Method and Recellularization With Meniscal Cell Population Derived From Mesenchymal Stem Cells
    (SAGE Publications, 2021) Kara, Aylin; Koçtürk, Semra; Bilici, Gökçen; Havıtçıoğlu, Hasan
    Tissue engineering approaches which include a combination of cells and scaffold materials provide an alternative treatment for meniscus regeneration. Decellularization and recellularization techniques are potential treatment options for transplantation. Maintenance of the ultrastructure composition of the extracellular matrix and repopulation with cells are important factors in constructing a biological scaffold and eliminating immunological reactions. The aim of the study is to develop a method to obtain biological functional meniscus scaffolds for meniscus regeneration. For this purpose, meniscus tissue was decellularized by our modified method, a combination of physical, chemical, and enzymatic methods and then recellularized with a meniscal cell population composed of fibroblasts, chondrocytes and fibrochondrocytes that obtained from mesenchymal stem cells. Decellularized and recellularized meniscus scaffolds were analysed biochemically, biomechanically and histologically. Our results revealed that cellular components of the meniscus were successfully removed by preserving collagen and GAG structures without any significant loss in biomechanical properties. Recellularization results showed that the meniscal cells were localized in the empty lacuna on the decellularized meniscus, and also well distributed and proliferated consistently during the cell culture period (p < 0.05). Furthermore, a high amount of DNA, collagen, and GAG contents (p < 0.05) were obtained with the meniscal cell population in recellularized meniscus tissue. The study demonstrates that our decellularization and recellularization methods were effective to develop a biological functional meniscus scaffold and can mimic the meniscus tissue with structural and biochemical features. We predict that the obtained biological meniscus scaffolds may provide avoidance of adverse immune reactions and an appropriate microenvironment for allogeneic or xenogeneic recipients in the transplantation process. Therefore, as a promising candidate, the obtained biological meniscus scaffolds might be verified with a transplantation experiment.
  • Article
    Citation - WoS: 6
    Citation - Scopus: 6
    Functional Characterization of a Novel Cyp119 Variant To Explore Its Biocatalytic Potential
    (Wiley, 2021) Sakallı, Tuğçe; Sürmeli, Nur Başak
    Biocatalysts are increasingly applied in the pharmaceutical and chemical industry. Cytochrome P450 enzymes (P450s) are valuable biocatalysts due to their ability to hydroxylate unactivated carbon atoms using molecular oxygen. P450s catalyze reactions using nicotinamide adenine dinucleotide phosphate (NAD(P)H) cofactor and electron transfer proteins. Alternatively, P450s can utilize hydrogen peroxide (H2O2) as an oxidant, but this pathway is inefficient. P450s that show higher efficiency with peroxides are sought after in industrial applications. P450s from thermophilic organisms have more potential applications as they are stable toward high temperature, high and low pH, and organic solvents. CYP119 is an acidothermophilic P450 from Sulfolobus acidocaldarius. In our previous study, a novel T213R/T214I (double mutant [DM]) variant of CYP119 was obtained by screening a mutant library for higher peroxidation activity utilizing H2O2. Here, we characterized the substrate scope; stability toward peroxides; and temperature and organic solvent tolerance of DM CYP119 to identify its potential as an industrial biocatalyst. DM CYP119 displayed higher stability than wild-type (WT) CYP119 toward organic peroxides. It shows higher peroxidation activity for non-natural substrates and higher affinity for progesterone and other bioactive potential substrates compared to WT CYP119. DM CYP119 emerges as a new biocatalyst with a wide range of potential applications in the pharmaceutical and chemical industry.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Cloning, Expression, and Characterization of a Novel Sericin-Like Protein
    (Wiley, 2022) Bostan, Fatmanur; Sürmeli, Nur Başak
    Silk consists of two proteins called fibroin and sericin. While fibroin is used in the textile industry and has various biomaterial applications, sericin has been considered as waste material until recently. Sericin is a multicomponent protein and it has important properties such as biocompatibility, biodegradability, cryoprotectivity, and antioxidant. Sericin from silkworm cocoons can be obtained by chemical, enzymatic, and heat treatment methods. However, sericin obtained with these treatment methods is not of consistent and high quality. Moreover, the exposure of sericin to harsh conditions during extraction leads to inconsistencies in the composition and structure of the sericin obtained. The inconsistencies in sericin structure and composition decrease application of sericin as a biomaterial. Here, we produce a sericin-like protein (Ser4mer) with native sequence of sericin encoding four repeats of the conserved 38 amino acid motif recombinantly in Escherichia coli and characterize its structural properties. Ser4mer protein shows similar structure to native sericin and higher solubility than previously obtained recombinant sericin-like proteins. Recombinant production of a soluble sericin-like protein will significantly expand its applications as a biomaterial. In addition, recombinant production of silk proteins will allow us to understand sequence-structure relationships in these proteins.
  • Article
    Citation - WoS: 8
    Citation - Scopus: 12
    Adjuvant Potency of Astragaloside Vii Embedded Cholesterol Nanoparticles for H3n2 Influenza Vaccine
    (TÜBİTAK, 2020) Genç, Rukan; Yakuboğulları, Nilgün; Nalbantsoy, Ayşe; Coven, Fethiye; Bedir, Erdal
    Adjuvants are substances that increase the immune response to a given antigen. In the development of novel vaccine adjuvants/systems, saponins are one of the most attractive molecules due to their altered immunomodulatory activities. In this study, we tried to develop PEG (polyethylene glycol)/cholesterol-based lipid nanoparticles (LNPs) to deliver the Astragaloside VII (AST-VII) and potentiate adjuvant properties of AST-VII for the influenza vaccine. In the formation of PEG/cholesterol/AST-VII-based LNPs (PEG300: Chol-AST-VII LNPs), 3 different primary solvents (acetone, ethanol, and chloroform) were evaluated, employing their effects on hydrodynamic particle size, distribution, surface chemistry, and colloidal stability. Prepared nanoparticles were simply admixtured with inactivated influenza antigen (H3N2) and applied to PMA (phorbol 12-myristate 13-acetate)-ionomycin treated human whole blood to evaluate their cytokine release profile. PEG300: Chol-AST-VII LNPs (80.2 +/- 7.7 nm) were obtained using chloroform as a desolvation agent. Co-treatment of PMA-ionomycin with AST-VII and PEG300: Chol-AST-VII LNPs significantly increased the levels of IL-2 and IFN-gamma, compared to PMA-ionomycin alone. In the presence of H3N2, AST-VII was able to augment IL-17A, while PEG300: Chol-AST-VII LNPs stimulated the production of IFN-gamma. Hemolysis was only observed in PEG300: Chol-AST-VII LNPs (250 mu g/mL) treatment. AST-VII and AST-VII-integrated LNPs could be used as efficacious adjuvants for an inactivated H3N2 vaccine in vitro, and cytokine response through Th1/Th17 route was reported.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 5
    Low Magnitude High Frequency Vibrations Expedite the Osteogenesis of Bone Marrow Stem Cells on Paper Based 3d Scaffolds
    (Springer, 2020) Karadaş, Özge; Meşe, Gülistan; Özçivici, Engin
    Anabolic effects of low magnitude high frequency (LMHF) vibrations on bone tissue were consistently shown in the literature in vivo, however in vitro efforts to elucidate underlying mechanisms are generally limited to 2D cell culture studies. Three dimensional cell culture platforms better mimic the natural microenvironment and biological processes usually differ in 3D compared to 2D culture. In this study, we used laboratory grade filter paper as a scaffold material for studying the effects of LHMF vibrations on osteogenesis of bone marrow mesenchymal stem cells in a 3D system. LMHF vibrations were applied 15 min/day at 0.1 g acceleration and 90 Hz frequency for 21 days to residing cells under quiescent and osteogenic conditions. mRNA expression analysis was performed for alkaline phosphatase (ALP) and osteocalcin (OCN) genes, Alizarin red S staining was performed for mineral nodule formation and infrared spectroscopy was performed for determination of extracellular matrix composition. The highest osteocalcin expression, mineral nodule formation and the phosphate bands arising from the inorganic phase was observed for the cells incubated in osteogenic induction medium with vibration. Our results showed that filter paper can be used as a model scaffold system for studying the effects of mechanical loads on cells, and LMHF vibrations induced the osteogenic differentiation of stem cells.