PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7645
Browse
7 results
Search Results
Now showing 1 - 7 of 7
Article Citation - WoS: 23Citation - Scopus: 24Analytical Solution of Poisson-Boltzmann Equation for Interacting Plates of Arbitrary Potentials and Same Sign(Elsevier Ltd., 2010) Polat, Mehmet; Polat, HürriyetEfficient calculation of electrostatic interactions in colloidal systems is becoming more important with the advent of such probing techniques as atomic force microscopy. Such practice requires solving the nonlinear Poisson-Boltzmann equation (PBE). Unfortunately, explicit analytical solutions are available only for the weakly charged surfaces. Analysis of arbitrarily charged surfaces is possible only through cumbersome numerical computations. A compact analytical solution of the one-dimensional PBE is presented for two plates interacting in symmetrical electrolytes. The plates can have arbitrary surface potentials at infinite separation as long they have the same sign. Such a condition covers a majority of the colloidal systems encountered. The solution leads to a simple relationship which permits determination of surface potentials, surface charge densities, and electrostatic pressures as a function of plate separation H for different charging scenarios. An analytical expression is also presented for the potential profile between the plates for a given separation. Comparison of these potential profiles with those obtained by numerical analysis shows the validity of the proposed solution. © 2009 Elsevier Inc. All rights reserved.Article Citation - WoS: 29Citation - Scopus: 38Encapsulating Fly Ash and Acidic Process Waste Water in Brick Structure(Elsevier Ltd., 2010) Köseoğlu, K.; Polat, Mehmet; Polat, HürriyetFly ash contains metals such as cadmium, iron, lead, aluminum and zinc in its structure in appreciable amounts. These metals can leach out into surface and ground waters if fly ash is not properly disposed of. A similar problem also exists for acidic process waste waters discharged by numerous industries. The purpose of this study was to utilize such wastes as additives in the production of construction quality bricks for the purpose of waste elimination. The bricks produced were subjected to flexural strength and water retention capacity tests along with heavy metal leaching experiments in order to determine the applicability of the procedure and the best possible recipes. This paper summarizes the results obtained in these tests along with the possible mechanisms involved in stabilizing the two wastes in the brick structure. © 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 14Citation - Scopus: 15Neutralization of an Extremely Acidic Sludge and Stabilization of Heavy Metals in Flyash Aggregates(Elsevier Ltd., 2007) Polat, Mehmet; Güler, Erkan; Lederman, Eli; Cohen, HaimAn extremely acidic, heavy metal-rich sludge (pH = -1.2) was scrubbed with a Class-F fly ash in order to simultaneously neutralize the acidity and stabilize the heavy metals contained in both wastes. This paper outlines the leaching behavior of the aggregate material generated by scrubbing. For proper fly ash/sludge ratios, the fly ash acted as an outstanding neutralizer for the acidic waste. Leaching of heavy metals from the aggregate samples was below the environmental limits within a pH range between 3 and 9. Subsequent washing of the leached aggregate with acidic CALWET solutions did not result in an additional release of heavy metals. It is proposed that coordinative bonding of the metal cations onto neutral surface sites and electrostatic adsorption led to stabilization of the heavy metals within the aggregate structure below hydrolysis pHs.Article Citation - WoS: 57Citation - Scopus: 62Effect of Various Treatment and Glazing (coating) Techniques on the Roughness and Wettability of Ceramic Dental Restorative Surfaces(Elsevier Ltd., 2006) Aksoy, Gökhan; Polat, Hürriyet; Polat, Mehmet; Çoşkun, G.Surface treatment procedures such as grinding and polishing are needed to provide the ceramic dental restorative materials with proper fitting and occlusion. The treated surfaces are customarily glazed to improve the strength and smoothness. Though smoothness and wetting of the dental surfaces are important to minimize bacterial plaque retention, influence of the surface treatment and glazing procedures on the final surface roughness and its correlation to wettability are overlooked. In this work, effect of various treatment (diamond fraising, stoning, sanding and aluminum oxide and rubber polishing) and glazing (auto and overglazing) techniques on the final roughness and the resulting wettability of dental ceramic surfaces were investigated using scanning electron microscopy (SEM) observations and atomic force microscopy (AFM) scans, 75 scans per sample. The surfaces were characterized and assigned an average roughness measure, Ra. The wettability of the same surfaces was evaluated using micro-contact angle measurements (25 micro-bubbles placed on a grid on each surface) to correlate the final surface roughness and wettability. The results show that overglazing prevails over surface irregularities from different treatment procedures and provides homegeneously smooth surfaces with mean Ra < 10 nm. It also produces uniformly wetted surfaces with low contact angles around 20°. The autoglazed surfaces are less smooth (mean Ra around 50 nm) and displays sporadic topographic irregularities. They display larger and less uniform contact angles ranging between 35° and 50°. The results suggest that overglazing should be preferred after surface treatment to obtain a smooth and well-wetted dental ceramic surface.Article Citation - WoS: 1Citation - Scopus: 2Kinetic Estimation of the Adsorbate Distribution on the Surface From Adsorbed Amounts(Elsevier Ltd., 2006) Polat, MehmetA phenomenological multilayer adsorption model for a well-dispersed, homogeneous, nonporous adsorbent and a molecular adsorbate is presented. The model provides explicit kinetic expressions associating the adsorbed amounts to the fraction of the surface occupied and reduces to the first- and second-order adsorption models for special cases. Parameters of the model are a pair of true rate constants related to the adsorbate-adsorbent and adsorbate-surface adsorbate affinities. A general graphical procedure and analytical equations for special cases are provided to estimate the rate constants from kinetic adsorption data. Data from the adsorption of sodium stearate onto α-alumina from water were used to test the model. The predicted values of the rate constants suggested that the stearate was distributed homogeneously on the alumina surface and essentially adsorbed as a monolayer before starting to form the second layer.Article Citation - WoS: 24Citation - Scopus: 29Effect of Ph and Hydration on the Normal and Lateral Interaction Forces Between Alumina Surfaces(Elsevier Ltd., 2006) Polat, M.; Sato, K.; Nagaoka, T.; Watari, K.Interaction forces between alumina surfaces were measured using an AFM-colloid probe method at different pHs. For an α-alumina-sapphire system at acidic pH, the force curve exhibited a well-defined repulsive barrier and an attractive minimum. At basic pH, the interactive force was repulsive at all separations with no primary minimum. Lateral force measurements under the same conditions showed that frictional forces were nearly an order of magnitude smaller at basic pH than those observed at acidic pH. This behavior was attributed to the hydration of the alumina surface. Normal and lateral force measurements with the strongly hydrated ρ-alumina surfaces supported these findings. © 2006 Elsevier Inc. All rights reserved.Article An Investigation of the Presence of Methane and Other Gases at the Uzundere-Izmir Solid Waste Disposal Site, Izmir, Turkey(Elsevier Ltd., 2003) Onargan, Turgay; Küçük, Kerim; Polat, MehmetIzmir is a large metropolitan city with a population of 3,114,860. The city consists of 27 townships, each township has a population of not less than 10,000 inhabitants. The two major solid waste disposal sites are in the townships of Uzundere and Harmandali. The amount of solid waste that is disposed at each of these sites is about 800 and 1800 t/day, respectively. In Uzundere, compost is produced from the organic fraction of urban solid wastes while the residual material is deposited at a disposal site with a remaining capacity of 700,000 m3 as of 2001. Gas monitoring and measurements were carried out at the disposal site in Uzundere. For this purpose, nine sampling wells were drilled on selected locations. Each well was furnished with perforated metal pipes suitable for gas monitoring and measurements. The following gases were monitored: O2, CH4, CO, CO 2, and H2S. The most important finding was that the concentrations of CH4 in the wells ranged from 7 to 57%. Dilution of the CH4 by O2 down to the LEL levels (5-15%) is always possible and poses a continuing risk at the site. Furthermore, the levels of O2 require that access to the site be limited to only authorized personnel