PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7645
Browse
35 results
Search Results
Now showing 1 - 10 of 35
Article Application of 3D Cell Culture Techniques in Nanotoxicology: How Far Are We(Springer, 2026) Shakeri, Raheleh; Mirjalili, Seyedeh Zohreh; Karakus, Ceyda Oksel; Safavi, MalihehInvestigation of toxicological profile and possible side effects of engineered nanomaterials (ENMs) is of high importance. Historically, two-dimensional (2D) cell culture was used to study the toxicity of the ENMs, but due to their inability to simulate in vivo cell behavior, three-dimensional (3D) cell culture systems have been developed. Nanotoxicity studies initiate with in vitro experiments and continue with in vivo studies, which are very challenging and sometimes accompanied by conflicting data due to the in vitro-in vivo gap. Thus, scientists are turning their attention to microfabrication techniques and engineered systems "called organ-on-a-chips", which act as an intermediate between in vivo and in vitro systems. The present account tries to review the classical study models and suitably cover the emerging 3D culture models including scaffold-free and scaffold-based 3D cell cultures, 3D co-culture with direct contact and without cell-cell contact methods as well as microfluidic-based tissue chips and organoids. Overall, this review aims to give readers a better insight about the ENMs' toxicology and fill the gaps between the knowledge and practical techniques. Hopefully, the presented information will resolve the issues of 2D in vitro cultures and display the clinically relevant responses to the concerns of therapeutic ENMs.Article Liposomal Encapsulation of a Synthetic Bromophenol for Antitumor Efficacy and Apoptotic Activity in Cancer Cells(Springer, 2026) Oztanrikulu, Bercem Dilan; Ozdemir, Ekrem; Avci, Bahri; Goksu, Suleyman; Bayrakceken, Handan Uguz; Askin, HakanA novel synthetic bromophenol (BP), inspired by marine-derived natural bromophenols, was evaluated for its antitumor activity and for the enhancement of its in vitro performance through liposomal encapsulation (LipoBP). Etoposide was used as a reference in characterization, release, and loading studies. PEGylated liposomes were employed to improve BP's solubility, bioavailability, and therapeutic potential. The cytotoxicity, apoptosis, and gene expression effects of free BP and LipoBP were assessed in A549 (lung) and MCF-7 (breast) cancer cell lines. WST-8 assays showed that encapsulation significantly increased BP's cytotoxic activity, particularly in A549 cells, while flow cytometry and Annexin V-FITC/PI analyses indicated more pronounced apoptotic induction by LipoBP compared with free BP. qRT-PCR analyses revealed upregulation of proapoptotic genes (BAX, CASP6, CASP3 and CASP9) and downregulation of antiapoptotic/survival genes (BCL-XL, IQSEC2) in both cell lines, indicating activation of intrinsic apoptotic pathways. Plain liposomes exhibited minimal cytotoxicity, confirming their biocompatibility. Liposomal bromophenol, which we have introduced to the literature for the first time, is expected to be a promising nanocarrier system that could be effective in cancer treatment by improving the therapeutic index of new drug candidates such as marine bromophenols.Article Comparative Proteomic Analysis of Dental-Origin Stem Cells: Insights Into Regenerative Potential(Springer, 2025) Tez, Banu Cicek; Durukan, Sebahat Melike; Yildir, Selin Kubra; Cokkececi, Murat; Boyvat, Dudu; Altinsoy, Nilay; Ozcan, ServetTeeth are a significant source of stem cells and have clinical importance for regenerative medicine. A human tooth harbors different kinds of stem cells in the dental pulp (DPSC) or the periodontal ligament (PDLSC). Also exfoliated teeth in childhood contain a special type of stem cells in their pulp called Stem cells from Human Exfoliated Deciduous teeth (SHED). All these stem cells have features and capacities that vary depending on their niche. Here we investigated the proteomic properties of three types of stem cells that originated from human teeth. We isolated and cultured the DPSCs, PDLSCs, and SHED cells. After validating MSC populations via immunophenotyping, we performed a mass spectrometry-based proteomic approach to identify and relatively quantify whole cell and secreted proteins. Identified proteins were evaluated by using Gene Ontology and Reactome pathway analysis tools. Our data reveal that SHED cells represented inflammation, hypoxia, and nutrient deficiency-associated ontologies in both their secretome and whole-cell proteomes. The whole-cell proteome of PDLSCs consisted of differentiation and proliferation-associated molecules while their secretory molecules were mainly associated with inflammation, ECM organization, and immune response. Among dental-originated stem cells, DPSCs appeared to be the healthiest and clinically relevant in terms of proteomic properties with their proliferation, growth factor signaling, and stemness-associated molecules in their secretome and whole-cell proteome. Obtained results demonstrated that every type of stem cell from dental origin has unique proteomic features that are altered by their location and physiological conditions. The findings may help researchers improve the dental stem-cell-based regenerative medicine approaches.Article Citation - WoS: 4Citation - Scopus: 4Estimation of Heat Production Rate Using Thermal Data During Exercise in Indoor Environments: a Study of Heat Storage Rate in Male Athletes(Springer, 2024) Balci, Gorkem Aybars; Avci, Ali Berkay; Colakoglu, Muzaffer; Basaran, Tahsin; Balcı, Görkem Aybars; Avcı, Ali Berkay; Çolakoğlu, Muzaffer; Başaran, TahsinThe increasing preference for indoor exercise spaces highlights the relationship between indoor thermal environments and physiological responses, particularly concerning thermal comfort during physical activity. Determining the metabolic heat production rate during exercise is essential for optimizing the thermal comfort, well-being, and performance of individuals engaged in physical activities. This value can be determined during the activity using several methods, including direct calorimetry measurement, indirect calorimetry that uses analysis of respiratory gases, or approximations using collected data such as speed, body mass, and heart rate. The study aimed to calculate the metabolic heat production rate by infrared thermal evaluation (ITE) based on the body's thermal balance approach and compare it with the values determined by indirect calorimetry (IC). Fourteen participants volunteered for the study, using a cycling ergometer in a controlled climatic chamber. After the familiarization sessions, maximal O-2 intake levels (VO2max) were determined through maximal graded exercise tests. Subsequently, constant work rate exercise tests were performed at 60% of VO2max for 20 min. The metabolic heat production rates were calculated by IC and ITE for each athlete individually. Respiratory gases were used to determine IC, while body skin and core temperatures, along with physical environmental data, were applied to calculate ITE using the human body thermal balance approximation of ASHRAE. According to the results, heat storage rates were misleading among the body's heat transfer modes, particularly during the first 8 min of the exercise. ITE showed a moderate level of correlation with IC (r: 0.03-0.86) with a higher level of dispersion relative to the mean (CV%: 12-84%). Therefore, a new equation (ITEnew) for the heat storage rates was proposed using the experimental data from this study. The results showed that ITEnew provided more precise estimations for the entire exercise period (p > 0.05). Correlations between ITEnew and IC values were consistently strong throughout the exercise period (r: 0.62-0.85). It can be suggested that ITEnew values can predict IC during the constant work rate steady-state exercise.Article Estimation of Heat Production Rate Using Thermal Data During Exercise in Indoor Environments: a Study of Heat Storage Rate in Male Athletes(Springer, 2024) Balcı, Görkem Aybars; Avcı, Ali Berkay; Çolakoğlu, Muzaffer; Başaran, TahsinThe increasing preference for indoor exercise spaces highlights the relationship between indoor thermal environments and physiological responses, particularly concerning thermal comfort during physical activity. Determining the metabolic heat production rate during exercise is essential for optimizing the thermal comfort, well-being, and performance of individuals engaged in physical activities. This value can be determined during the activity using several methods, including direct calorimetry measurement, indirect calorimetry that uses analysis of respiratory gases, or approximations using collected data such as speed, body mass, and heart rate. The study aimed to calculate the metabolic heat production rate by infrared thermal evaluation (ITE) based on the body's thermal balance approach and compare it with the values determined by indirect calorimetry (IC). Fourteen participants volunteered for the study, using a cycling ergometer in a controlled climatic chamber. After the familiarization sessions, maximal O2 intake levels (VO2max) were determined through maximal graded exercise tests. Subsequently, constant work rate exercise tests were performed at 60% of VO2max for 20 min. The metabolic heat production rates were calculated by IC and ITE for each athlete individually. Respiratory gases were used to determine IC, while body skin and core temperatures, along with physical environmental data, were applied to calculate ITE using the human body thermal balance approximation of ASHRAE. According to the results, heat storage rates were misleading among the body's heat transfer modes, particularly during the first 8 min of the exercise. ITE showed a moderate level of correlation with IC (r: 0.03-0.86) with a higher level of dispersion relative to the mean (CV%: 12-84%). Therefore, a new equation (ITEnew) for the heat storage rates was proposed using the experimental data from this study. The results showed that ITEnew provided more precise estimations for the entire exercise period (p > 0.05). Correlations between ITEnew and IC values were consistently strong throughout the exercise period (r: 0.62-0.85). It can be suggested that ITEnew values can predict IC during the constant work rate steady-state exercise.Article Citation - WoS: 5Citation - Scopus: 5Differences and Similarities in Biophysical and Biological Characteristics Between U87 Mg Glioblastoma and Astrocyte Cells(Springer, 2023) Özdil, Berrin; Çalık Kocatürk, Duygu; Altunayar Ünsalan, Çisem; Açıkgöz, Eda; Oltulu, Fatih; Görgülü, Volkan; Uysal, Ayşegül; Öktem, Gülperi; Ünsalan, Ozan; Güler, Günnur; Aktuğ, HüseyinCurrent cancer studies focus on molecular-targeting diagnostics and interactions with surroundings; however, there are still gaps in characterization based on topological differences and elemental composition. Glioblastoma (GBM cells; GBMCs) is an astrocytic aggressive brain tumor. At the molecular level, GBMCs and astrocytes may differ, and cell elemental/topological analysis is critical for identifying potential new cancer targets. Here, we used U87 MG cells for GBMCS. U87 MG cell lines, which are frequently used in glioblastoma research, are an important tool for studying the various features and underlying mechanisms of this aggressive brain tumor. For the first time, atomic force microscopy (AFM), scanning electron microscopy (SEM) accompanied by energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) are used to report the topology and chemistry of cancer (U87 MG) and healthy (SVG p12) cells. In addition, F-actin staining and cytoskeleton-based gene expression analyses were performed. The degree of gene expression for genes related to the cytoskeleton was similar; however, the intensity of F-actin, anisotropy values, and invasion-related genes were different. Morphologically, GBMCs were longer and narrower while astrocytes were shorter and more disseminated based on AFM. Furthermore, the roughness values of these cells differed slightly between the two call types. In contrast to the rougher astrocyte surfaces in the lamellipodial area, SEM-EDS analysis showed that elongated GBMCs displayed filopodial protrusions. Our investigation provides considerable further insight into rapid cancer cell characterization in terms of a combinatorial spectroscopic and microscopic approach.Article Citation - WoS: 7Citation - Scopus: 6Visceral Leishmaniasis Caused by Leishmania Tropica(Springer, 2023) Özbilgin, Ahmet; Tunalı, Varol; Çavuş, İbrahim; Vardarlı Tetik, Aslı; Dinç, Melike; Yalçın, Talat; Gündüz, Cumhur; Beyaz, Merve; Köse, ŞükranPurposeIn Turkey, the main causative agent of visceral leishmaniasis (VL) is Leishmania. infantum and the main causative agent of cutaneous leishmaniasis (CL) is Leishmania tropica. In this study, we aimed to discuss the possible mechanisms, clinical aspects, and threat of visceralizing L. tropica.MethodsThis study includes seven cases of VL caused by L. tropica.Five patients were male (71%) and four were adults (57%).ResultsAll the VL patients complained of fever and splenomegaly. Fatigue, pancytopenia, and hepatomegaly were present in six patients each (86%), while weight loss and gastrointestinal system (GIS) symptoms were present in 5 patients (71%).ConclusionsIn this study, we have evaluated seven cases of visceralized L. tropica (VLT) in the context of the changing leishmaniasis epidemiology in Turkey. We have evaluated the possible mechanisms of visceralization; inter- and intraspecies genetic exchange with all the old world leishmaniasis agents present in the region, stress induced by inappropriate use of drugs, and possible ongoing adaptation mechanisms of Leishmania spp. The threat posed by VLT is significant as L. tropica is the most widespread and most common cause of leishmaniasis in Turkey. We do not know the vectorial capacity of the sand flies for the transmission of VLT strains or if these strains are in circulation in Turkey. Future studies should be carried out to investigate these issues as the transition of L. tropica from a mild disease-causing agent to a mortal one poses a significant public health concern for Turkey and Europe.Article Citation - WoS: 4Citation - Scopus: 4Mapping of Quantitative Trait Loci for the Nutritional Value of Fresh Market Tomato(Springer, 2023) Gürbüz Çolak, Nergiz; Tek Eken, Neslihan; Ülger, Mehmet; Frary, Anne; Doğanlar, SamiThe incidence of many diseases, such as cancer, cardiovascular diseases, and diabetes, is associated with malnutrition and an unbalanced daily diet. Vegetables are an important source of vitamins and essential compounds for human health. As a result, such metabolites have increasingly become the focus of breeding programs. Tomato is one of the most popular components of our daily diet. Therefore, the improvement of tomato's nutritional quality is an important goal. In the present study, we performed targeted metabolic profiling of an interspecific Solanum pimpinellifolium x S. lycopersicum inbred backcross line (IBL) population and identified quantitative trait loci responsible for the nutritional value of tomato. Transgressive segregation was apparent for many of the nutritional compounds such that some IBLs had extremely high levels of various amino acids and vitamins compared to their parents. A total of 117 QTLs for nutritional traits including 62 QTLs for amino acids, 18 QTLs for fatty acids, 12 QTLs for water-soluble vitamins, and 25 QTLs for fat-soluble vitamins were identified. Moreover, almost 24% of identified QTLs were confirmed in previous studies, and 40 possible gene candidates were found for 18 identified QTLs. These findings can help breeders to improve the nutritional value of tomato.Review Citation - WoS: 23Citation - Scopus: 24Microfluidic-Based Technologies for Diagnosis, Prevention, and Treatment of Covid-19: Recent Advances and Future Directions(Springer, 2023) Tarım, Ergün Alperay; Anıl İnevi, Müge; Özkan, İlayda; Keçili, Seren; Bilgi, Eyüp; Başlar, Muhammet Semih; Özçivici, Engin; Öksel Karakuş, Ceyda; Tekin, Hüseyin CumhurThe COVID-19 pandemic has posed significant challenges to existing healthcare systems around the world. The urgent need for the development of diagnostic and therapeutic strategies for COVID-19 has boomed the demand for new technologies that can improve current healthcare approaches, moving towards more advanced, digitalized, personalized, and patient-oriented systems. Microfluidic-based technologies involve the miniaturization of large-scale devices and laboratory-based procedures, enabling complex chemical and biological operations that are conventionally performed at the macro-scale to be carried out on the microscale or less. The advantages microfluidic systems offer such as rapid, low-cost, accurate, and on-site solutions make these tools extremely useful and effective in the fight against COVID-19. In particular, microfluidic-assisted systems are of great interest in different COVID-19-related domains, varying from direct and indirect detection of COVID-19 infections to drug and vaccine discovery and their targeted delivery. Here, we review recent advances in the use of microfluidic platforms to diagnose, treat or prevent COVID-19. We start by summarizing recent microfluidic-based diagnostic solutions applicable to COVID-19. We then highlight the key roles microfluidics play in developing COVID-19 vaccines and testing how vaccine candidates perform, with a focus on RNA-delivery technologies and nano-carriers. Next, microfluidic-based efforts devoted to assessing the efficacy of potential COVID-19 drugs, either repurposed or new, and their targeted delivery to infected sites are summarized. We conclude by providing future perspectives and research directions that are critical to effectively prevent or respond to future pandemics.Article Citation - WoS: 2Citation - Scopus: 2Tuning the Solid Phase Fluorescence Emission From Long Wavelength Visible To Near-Infrared in Oxazol-5 Derivatives: Structure–property Relationship, Theoretical and Experimental Studies(Springer, 2023) Nazlı, İbrahim Hanif; Yakalı, Gül; Topkaya, Derya; İzmirli, Merve; Uzun, Sema Demirci; Alp, SerapMost of the fluorescent molecules among organic π-conjugated materials show blue or green emission in the solid phase but few of them emit red-shifted visible and near-infrared light in the material science. To create molecules emitting for this feature, two π-conjugated oxazol-5-one derivatives containing donor (OCH3) and acceptor groups (NO2) were synthesized. Their optical and charge-transport properties were investigated through experimental and theoretical methods including the single crystal X-ray crystallography, Hirshfeld Surface Analysis, photophysical studies and Density Functional Theory (DFT), respectively. In addition, FT-IR, 1H-NMR, 13C-NMR spectroscopy, cyclic voltammetry (CV) measurements were performed. According to our results, both molecules may provide the significant pathway of development of long wavelength visible and red emissive features in solid phase with the aggregation induced enhanced emission (AIEE) properties particularly in the fields of OLEDs, optical communication, defence and bioimaging.