PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7645
Browse
11 results
Search Results
Now showing 1 - 10 of 11
Article Citation - WoS: 2Citation - Scopus: 2Exploring the Use of Water-Extracted Flaxseed Hydrocolloids in Three-Dimensional Cell Culture(Mary Ann Liebert, inc, 2024) Yildirim-Semerci, Ozum; Bilginer-Kartal, Rumeysa; Arslan-Yildiz, AhuPlant-derived hydrocolloids offer promising prospects in biomedical applications. Among these, Flaxseed hydrocolloid (FSH) can form a soft, elastic, and biocompatible hydrocolloid with tunable viscosity and superior swelling capacity, making it an attractive scaffold. This study introduces a green extraction method for FSH, employing a single-step aqueous extraction process and fabrication of FSH scaffold. Despite growing interest, the pristine form of FSH has not been investigated for sustainable long-term three-dimensional (3D) cell culture. Here, FSH scaffolds were thoroughly characterized for their morphological, chemical, mechanical, and biological properties. 3D cell culture experiments were conducted using NIH-3T3 mouse fibroblast cells, and cell viability was assessed using live/dead and Alamar Blue assays. High cell viability was sustained for long term compared with 2D cell culture. Cell adhesion and 3D cellular morphology on FSH scaffold for 30 days were monitored by scanning electron microscopy analysis. Also, collagen type-I and F-actin expressions were analyzed by immunostaining after 30 days of culture, resulting in 5- and 4-fold increments of fluorescence intensity, respectively. Results indicate sustained cell viability in the long term and favorable cell-material interaction, demonstrating the potential of FSH as a scaffold. This study emphasizes the importance of the green extraction approach, improving the biocompatibility and functionality of FSH tissue engineering applications. Impact Statement Flaxseed hydrocolloid (FSH) is a promising scaffold for biomedical applications due to its biocompatibility and tunable properties. This study introduces a green extraction method for FSH and evaluates its use in 3D cell culture with NIH-3T3 mouse fibroblast cells. The findings indicate high cell viability and enhanced cell-material interactions over 30 days, highlighting the potential of FSH for tissue engineering.Article Citation - WoS: 10Citation - Scopus: 11Arabinoxylan-Based Psyllium Seed Hydrocolloid: Single-Step Aqueous Extraction and Use in Tissue Engineering(Elsevier B.V., 2024) Yildirim-Semerci,Ö.; Bilginer-Kartal,R.; Arslan-Yildiz,A.Biomacromolecules derived from natural sources offer superior biocompatibility, biodegradability, and water-holding capacity, which make them promising scaffolds for tissue engineering. Psyllium seed has gained attention in biomedical applications recently due to its gel-forming ability, which is provided by its polysaccharide-rich content consisting mostly of arabinoxylan. This study focuses on the extraction and gelation of Psyllium seed hydrocolloid (PSH) in a single-step water-based protocol, and scaffold fabrication using freeze-drying method. After characterization of the scaffold, including morphological, mechanical, swelling, and protein adsorption analyses, 3D cell culture studies were done using NIH-3 T3 fibroblast cells on PSH scaffold, and cell viability was assessed using Live/Dead and Alamar Blue assays. Starting from day 1, high cell viability was obtained, and it reached 90 % at the end of 15-day culture period. Cellular morphology on PSH scaffold was monitored via SEM analysis; cellular aggregates then spheroid formation were observed throughout the study. Collagen Type-I and F-actin expressions were followed by immunostaining revealing a 9- and 10-fold increase during long-term culture. Overall, a single-step and non-toxic protocol was developed for extraction and gelation of PSH. Obtained results unveiled that PSH scaffold provided a favorable 3D microenvironment for cells, holding promise for further tissue engineering applications. © 2024 Elsevier B.V.Article Citation - WoS: 3Citation - Scopus: 4Biopatterning of 3d Cellular Model by Contactless Magnetic Manipulation for Cardiotoxicity Screening(Mary Ann Liebert, Inc, 2023) Önbaş, Rabia; Arslan Yıldız, AhuPatterning cells to create three-dimensional (3D) cell culture models by magnetic manipulation is a promising technique, which is rapid, simple, and cost-effective. This study introduces a new biopatterning approach based on magnetic manipulation of cells with a bioink that consists alginate, cells, and magnetic nanoparticles. Plackett-Burman and Box-Behnken experimental design models were used to optimize bioink formulation where NIH-3T3 cells were utilized as a model cell line. The patterning capability was confirmed by light microscopy through 7 days culture time. Then, biopatterned 3D cardiac structures were formed using H9c2 cardiomyocyte cells. Cellular and extracellular components, F-actin and collagen Type I, and cardiac-specific biomarkers, Troponin T and MYH6, of biopatterned 3D cardiac structures were observed successfully. Moreover, Doxorubicin (DOX)-induced cardiotoxicity was investigated for developed 3D model, and IC50 value was calculated as 8.1 μM for biopatterned 3D cardiac structures, which showed higher resistance against DOX-exposure compared to conventional two-dimensional cell culture. Hereby, developed biopatterning methodology proved to be a simple and rapid approach to fabricate 3D cardiac models, especially for drug screening applications. Copyright 2023, Mary Ann Liebert, Inc., publishers.Review Citation - WoS: 52Citation - Scopus: 56Spheroid engineering in microfluidic devices(American Chemical Society, 2023) Tevlek, Atakan; Keçili, Seren; Özçelik, Özge Solmaz; Kulah, Haluk; Tekin, H. CumhurTwo-dimensional (2D) cell culture techniques are commonly employed to investigate biophysical and biochemical cellular responses. However, these culture methods, having monolayer cells, lack cell-cell and cell-extracellular matrix interactions, mimicking the cell microenvironment and multicellular organization. Three-dimensional (3D) cell culture methods enable equal transportation of nutrients, gas, and growth factors among cells and their microenvironment. Therefore, 3D cultures show similar cell proliferation, apoptosis, and differentiation properties to in vivo. A spheroid is defined as self-assembled 3D cell aggregates, and it closely mimics a cell microenvironment in vitro thanks to cell-cell/matrix interactions, which enables its use in several important applications in medical and clinical research. To fabricate a spheroid, conventional methods such as liquid overlay, hanging drop, and so forth are available. However, these labor-intensive methods result in low-throughput fabrication and uncontrollable spheroid sizes. On the other hand, microfluidic methods enable inexpensive and rapid fabrication of spheroids with high precision. Furthermore, fabricated spheroids can also be cultured in microfluidic devices for controllable cell perfusion, simulation of fluid shear effects, and mimicking of the microenvironment-like in vivo conditions. This review focuses on recent microfluidic spheroid fabrication techniques and also organ-on-a-chip applications of spheroids, which are used in different disease modeling and drug development studies.Article Citation - WoS: 5Citation - Scopus: 5Evaluation of Liposomal and Microbubbles Mediated Delivery of Doxorubicin in Two-Dimensional (2d) and Three-Dimensional (3d) Models for Breast Cancer(Galenos Publishing House, 2021) Aydın,M.; Özdemir,E.; Altun,Z.; Kılıç,S.; Aktaş,S.Objective: Liposomal cancer treatment strategies are useful in removing the side effects that were the main concern in recent years. In this study, we prepared microbubble (MBs) conjugated with DOX-loaded liposomes (DOX-loaded MBs) and investigated their effectiveness in in vitro breast cancer cells in two dimensions (2D) and three dimensions (3D). Materials and Methods: With this aim, breast cancer cells with different features (4T1, MDA-MB231, MCF-7) were growth in 2D and 3D dimensions. The cytotoxic and cell death effects under different conditions, durations and doses were evaluated with WST-1, trypan-blue, colony counts. Apoptotic effects were investigated with flow cytometric Annexin-V-PI and immunohistochemical (Ki-67, caspase 3, 8, 9) methods. Results: After free DOX and LipoDOX were applied, the proliferation index of three cell lines reduced. Intrinsic and extrinsic apoptotic pathways were activated in both 2D and 3D models. However, this effect was observed at lower levels in the 3D model due to the difficulty of diffusion of DOX into the spheroids. Additionally, the suitability of the 3D model for breast cancer cells was supported by formation of ductus-like structures and spheroids. Cell deaths were not observed significantly with the DOX-loaded microbubbles due to rising of MBs to the surface and not reaching spheroids held in matrigel of 3D model. Conclusion: DOX and LipoDOX showed anti-proliferative and apoptosis-inducing effects in breast cancer cells. However, these effects indicated variability depending on the cell lines and 2D or 3D model types. ©Copyright 2021 by the the Turkish Federation of Breast Diseases Societies.Article Citation - WoS: 43Citation - Scopus: 46Glucuronoxylan-Based Quince Seed Hydrogel: a Promising Scaffold for Tissue Engineering Applications(Elsevier, 2021) Güzelgülgen, Meltem; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuNatural gums and mucilages from plant-derived polysaccharides are potential candidates for a tissue-engineering scaffold by their ability of gelation and biocompatibility. Herein, we utilized Glucuron-oxylanbased quince seed hydrogel (QSH) as a scaffold for tissue engineering applications. Optimization of QSH gelation was conducted by varying QSH and crosslinker glutaraldehyde (GTA) concentrations. Structural characterization of QSH was done by Fourier Transform Infrared Spectroscopy (MR). Furthermore, morphological and mechanical investigation of QSH was performed by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The protein adsorption test revealed the suitability of QSH for cell attachment. Biocompatibility of QSH was confirmed by culturing NIH-3T3 mouse fibroblast cells on it. Cell viability and proliferation results revealed that optimum parameters for cell viability were 2 mg mi(-1)of QSH and 0.03 M GTA. SEM and DAPI staining results indicated the formation of spheroids with a diameter of approximately 300 pm. Furthermore, formation of extracellular matrix (ECM) microenvironment was confirmed with the Collagen Type-I staining. Here, it was demonstrated that the fabricated QSH is a promising scaffold for 3D cell culture and tissue engineering applications provided by its highly porous structure, remarkable swelling capacity and high biocompatibility. (C) 2021 Published by Elsevier B.V.Article Citation - WoS: 16Citation - Scopus: 13Fabrication of Tunable 3d Cellular Structures in High Volume Using Magnetic Levitation Guided Assembly(American Chemical Society, 2021) Onbas, Rabia; Arslan Yıldız, AhuTunable and reproducible size with high circularity is an important limitation to obtain three-dimensional (3D) cellular structures and spheroids in scaffold free tissue engineering approaches. Here, we present a facile methodology based on magnetic levitation (MagLev) to fabricate 3D cellular structures rapidly and easily in high-volume and low magnetic field. In this study, 3D cellular structures were fabricated using magnetic levitation directed assembly where cells are suspended and self-assembled by contactless magnetic manipulation in the presence of a paramagnetic agent. The effect of cell seeding density, culture time, and paramagnetic agent concentration on the formation of 3D cellular structures was evaluated for NIH/3T3 mouse fibroblast cells. In addition, magnetic levitation guided cellular assembly and 3D tumor spheroid formation was examined for five different cancer cell lines: MCF7 (human epithelial breast adenocarcinoma), MDA-MB-231 (human epithelial breast adenocarcinoma), SHSYSY (human bone-marrow neuroblastoma), PC-12 (rat adrenal gland pheochromocytoma), and HeLa (human epithelial cervix adenocarcinoma). Moreover, formation of a 3D coculture model was successfully observed by using MDA-MB-231 dsRED and MDA-MB-231 GFP cells. Taken together, these results indicate that the developed MagLev setup provides an easy and efficient way to fabricate 3D cellular structures and may be a feasible alternative to conventional methodologies for cellular/multicellular studies.Article Citation - WoS: 10Citation - Scopus: 11A New Drug Testing Platform Based on 3d Tri-Culture in Lab-On Devices(Elsevier, 2020) Gökçe, Begüm; Akçok, İsmail; Çağır, Ali; Pesen Okvur, DevrimDrug discovery has a 90% rate of failure because preclinical platforms for drug testing do not mimic the in vivo conditions. Doxorubicin (DOX) is a commonly used drug to treat breast cancer patients even though it has side effects. Lab-on-a-chip (LOC) devices provide spatial control at the micrometer scale and can thus emulate the cancer microenvironment. Here, using a multidisciplinary approach, a new drug testing platform based on 3D tri-culture in LOC devices was developed. Breast cancer cells alone or with normal mammary epithelial cells and macrophages were cultured in matrigel in LOC devices. The platform was used to test DOX and (R)-4'-methylklavuzon (KLA), which is a new anti-cancer drug candidate. Results showed that DOX and KLA were equally effective on breast cancer cells in 3D monoculture. KLA produced 26% less death for breast cancer cells than DOX in 3D tri-culture. More importantly, DOX was not selective between breast cancer cells and normal mammary epithelial cells in 3D tri- culture whereas KLA caused 56% less cell death than DOX for normal mammary epithelial cells. Results strongly recommend that 3D tri-culture in LOC devices be used for assessment of drug toxicity at the preclinical stage.Article Citation - WoS: 34Citation - Scopus: 36Biomimetic Hybrid Scaffold Consisting of Co-Electrospun Collagen and Pllcl for 3d Cell Culture(Elsevier Ltd., 2019) Türker, Esra; Yıldız, Ümit Hakan; Arslan Yıldız, AhuElectrospun collagen is commonly used as a scaffold in tissue engineering applications since it mimics the content and morphology of native extracellular matrix (ECM) well. This report describes "toxic solvent free" fabrication of electrospun hybrid scaffold consisting of Collagen (Col) and Poly(L-lactide-co-epsilon-caprolactone) (PLLCL) for three-dimensional (3D) cell culture. Biomimetic hybrid scaffold was fabricated via co-spinning approach where simultaneous electrospinning of PLLCL and Collagen was mediated by polymer sacrificing agent Polyvinylpyrrolidone (PVP). Acidified aqueous solution of PVP was used to solubilize collagen without using toxic solvents for electrospinning, and then PVP was readily removed by rinsing in water. Mechanical characterizations, protein adsorption, as well as biodegradation analysis have been conducted to investigate feasibility of biomimetic hybrid scaffold for 3D cell culture applications. Electrospun biomimetic hybrid scaffold, which has 3D-network structure with 300-450 nm fiber diameters, was found to be maximizing cell adhesion through assisting NIH 3T3 mouse fibroblast cells. 3D cell culture studies confirmed that presence of collagen in biomimetic hybrid scaffold have created a major impact on cell proliferation compared to conventional 2D systems on long-term, also cell viability increased with the increasing amount of collagen. (c) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 46Citation - Scopus: 57Recent Advances in Magnetic Levitation: a Biological Approach From Diagnostics To Tissue Engineering(American Chemical Society, 2018) Türker, Esra; Arslan Yıldız, AhuThe magnetic levitation technique has been utilized to orientate and manipulate objects both in two dimensions (2D) and three dimensions (3D) to form complex structures by combining various types of materials. Magnetic manipulation holds great promise for several applications such as self-assembly of soft substances and biological building blocks, manipulated tissue engineering, as well as cell or biological molecule sorting for diagnostic purposes. Recent studies are proving the potential of magnetic levitation as an emerging tool in biotechnology. This review outlines the advances of newly developing magnetic levitation technology on biological applications in aqueous environment from the biotechnology perspective.