Food Engineering / Gıda Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/12
Browse
3 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 9A Screen-Printed Electrode Modified With Gold Nanoparticles/ Cellulose Nanocrystals for Electrochemical Detection of 4,4'-methylene Diphenyl Diamine(Elsevier, 2023) Büyüktaş, Duygu; Ghaani, Masoud; Rovera, Cesare; Carullo, Daniele; Olsson, Richard T.; Korel, Figen; Farris, StefanoDeveloping simple, cost-effective, easy-to-use, and reliable analytical devices if of utmost importance for the food industry for rapid in-line checks of their products that must comply with the provisions set by the current legislation. The purpose of this study was to develop a new electrochemical sensor for the food packaging sector. More specifically, we propose a screen -printed electrode (SPE) modified with cellulose nanocrystals (CNCs) and gold nanoparticles (AuNPs) for the quantification of 4,4'-methylene diphenyl diamine (MDA), which is one of the most important PAAs that can transfer from food packaging materials into food stuffs. The electrochemical performance of the proposed sensor (AuNPs/CNCs/SPE) in the presence of 4,4'- MDA was evaluated using cyclic voltammetry (CV). The modified AuNPs/CNCs/SPE showed the highest sensitivity for 4,4'-MDA detection, with a peak current of 9.81 mu A compared with 7.08 mu A for the bare SPE. The highest sensitivity for 4,4'-MDA oxidation was observed at pH = 7, whereas the detection limit was found at 57 nM and the current response of 4,4'-MDA rose linearly as its concentration increased from 0.12 mu M to 100 mu M. Experiments using real packaging materials revealed that employing nanoparticles dramatically improved both the sensitivity and the selectivity of the sensor, which can be thus considered as a new analytical tool for quick, simple, and accurate measurement of 4,4 '-MDA during converting operations.Article Citation - WoS: 39Citation - Scopus: 41Novel Edible Films of Pectins Extracted From Low-Grade Fruits and Stalk Wastes of Sun-Dried Figs: Effects of Pectin Composition and Molecular Properties on Film Characteristics(Elsevier, 2023) Çavdaroğlu, Elif; Büyüktaş, Duygu; Farris, Stefano; Yemenicioğlu, AhmetThis study aimed to explore the characteristics of novel fig pectin films. For this purpose, films of crude fig pectin (CFP) extracted from low-grade sun-dried fruits and films of crude (CSP) and purified (PSP) stalk pectins extracted from stalk waste of processed high-quality sun-dried figs were evaluated for their physicochemical properties. The properties of pristine (CFP, CSP, and PSP films) and CaCl2 cross-linked films (CFP–Ca++, CSP-Ca++and PSP-Ca++ films) of fig pectins were also compared with films of commercial citrus (CP and CP-Ca++) and apple (AP, AP-Ca++) pectins. The cross-linking improved the mechanical strength and barrier properties of most films. CP, CP-Ca++, PSP, and PSP-Ca++ films showed greater mechanical strength and stiffness than other films. PSP-Ca++, PSP and CP-Ca++ films showed the lowest water vapor permeability (6.28, 12.85, 14.96 g.mm.m−2.day−1.kPa−1, respectively) while CSP-Ca++, CP-Ca++, CP, PSP-Ca++ films showed the lowest oxygen permeability coefficients (5403, 8265, 10776, 11124 mL.μm.m−2.24h−1.atm−1, respectively). All cross-linked fig pectin films showed 2–3 fold lower degree of swelling than CP-Ca++ film. The CFP-Ca++ film showed the highest surface hydrophobicity (contact angle = 101.8°) but the lowest water solubility (32.8%) and degree of swelling. Analysis of Pearson's correlations between pectin properties and film characteristics revealed that galacturonic acid (GA) content affects the mechanical properties, while GA content, degree of esterification (DE), and acetylation affect the moisture barrier performance; finally, GA content and DE affect the oxygen barrier performance of pectin films. Films of stalk waste pectins showed some properties beyond the limits of those obtained from commercial pectins.Article Citation - WoS: 7Citation - Scopus: 6Development of a Nano-Modified Glassy Carbon Electrode for the Determination of 2,6-Diaminotoluene (tda)(Elsevier, 2021) Büyüktaş, Duygu; Ghaani, Masoud; Rovera, Cesare; Olsson, Richard T.; Korel, Figen; Farris, StefanoThe objective of this study was to improve the overall performance of a glassy carbon electrode (GCE) for the detection of 2,6-diaminotoluene (TDA), a possibly carcinogenic primary aromatic amines (PAAs) that poses a serious risk for the consumer' health because they can transfer from multilayer food packages including adhesives based on aromatic polyurethane (PU) systems, to the food. The modification of the electrode surface was made by means of multi-walled carbon nanotubes (MWCNTs) and mesopomus carbon nanoparticles (MCNs). The MWCNTs-MCNs/GCE allowed achieving the best performance in terms of sensitivity, as revealed by cyclic voltammetry - CV, with an oxidation peak of 20.95 mu A over 0.079 mu A of the bare GCE. The pH of the medium influenced the oxidation of 2,6-TDA, with highest sensitivity at pH similar to 7. Amperometry experiments led to an estimated detection limit of 0.129 mu M, and three linear ranges were obtained for 2,6-TDA: 0.53-11.37 mu M, 11.37-229.36 mu M, and 229.36-2326.60 mu M. Chronoamperometry experiments combined with Cottrell's theory allowed estimating a diffusion coefficient of 2,6-TDA of 1.34 x 10(-4) cm(2) s(-1). The number of electrons (n similar to 1) involved in the catalytic oxidation of 2,6-TDA was determined according to the Lavimn's theory. Real sample tests demonstrated that the modification of the sensor using nanoparticls allowed to obtain a highly sensitive and selective sensor, which can possibly used as an alternative analytical device for the rapid, easy, and reliable determination of 2,6-TDA.