Food Engineering / Gıda Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/12
Browse
5 results
Search Results
Article Citation - WoS: 105Citation - Scopus: 133Water Vapor and Oxygen-Barrier Performance of Corn-Zein Coated Polypropylene Films(Elsevier Ltd., 2010) Tıhmınlıoğlu, Funda; Atik, İsa Doğan; Özen, BanuA novel corn-zein coating structure on polypropylene (PP) films was developed to examine its feasibility as an alternative water vapor and oxygen-barrier for flexible packaging industry. The barrier properties of the resulting films were evaluated as affected by coating formulation (solvent, corn-zein, plasticizer concentration and plasticizer type). Corn-zein with different amounts (5% and 15%) was dissolved in 70% and 95% aqueous ethanol solution at 50 °C, respectively. Solutions of corn-zein plasticized by polyethylene glycol (PEG) and glycerol (GLY) with various levels (20% and 50%) were applied on corona-discharged-treated PP by using solvent-casting method. The significant improvements in water vapor and oxygen-barrier properties of uncoated PP films were obtained with corn-zein coating. Water vapor permeability (WVP) of the coated films decreased significantly with increasing corn-zein concentration. The application of plasticized corn-zein coating on PP films showed nearly more than three order of reduction in oxygen permeability (OP). The high water vapor and oxygen-barriers were obtained for films coated with coating formulation consisting of higher amounts of corn-zein plasticized by GLY. The statistical analysis defined the key parameters of coating formulation that had major effect on the final properties of coated PP films as corn-zein, plasticizer concentration, and plasticizer type. © 2009 Elsevier Ltd. All rights reserved.Article Citation - WoS: 13Citation - Scopus: 18Effect of Corn-Zein Coating on the Mechanical Properties of Polypropylene Packaging Films(John Wiley and Sons Inc., 2011) Tıhmınlıoğlu, Funda; Atik, İsa Doğan; Özen, BanuIn this study, a novel film structure of corn zein coated on polypropylene (PP) synthetic films for food packaging applications was developed, and the mechanical properties of the resulting coated film, as affected by the coating formulation, were investigated. Composite structures of PP films coated with corn zein were obtained through a simple solvent casting method. Different amounts of corn zein (5 and 15%) were dissolved in 70 and 95% aqueous ethanol solution at 50 C. Solutions of corn zein plasticized with poly(ethylene glycol) and glycerol (GLY) at various levels (20 and 50%) were applied on corona-discharge-treated PP. A statistical analysis based on full factorial design was performed to examine the influence of the coating formulation on the final properties of the corn-zein-coated PP films. A significant (p < 0.05) improvement in the coated film’s mechanical properties was observed compared to those of the uncoated PP. The effect of the plasticization of the coating solutions was also quite significant. In general, GLY provided better improvements in the mechanical properties of the corn-zein-coated PP films. The statistical analysis of the results showed that the corn-zein and plasticizer concentrations and plasticizer type used in the coating formulations were more effective parameters and had significant effects on the mechanical behavior of the coated PP films. In conclusion, corn-zein coatings could have potential as alternatives to conventional synthetic polymers used in composite multilayer structures for food packaging applications.Article Citation - WoS: 11Citation - Scopus: 13Water Vapour Barrier Performance of Corn-Zein Coated Polypropylene (pp) Packaging Films(Springer Verlag, 2008) Atik, İsa Doğan; Özen, Fatma Banu; Tıhmınlıoğlu, FundaThe novel film structure of corn-zein coated on polypropylene (PP) synthetic film for packaging industry was developed to examine the feasibility of resulting coated films as an alternative water barrier performance for food packaging. The effects of coating formulation (solvent, corn-zein, plasticizer concentration and plasticizer type) on final properties of films were observed. Corn-zein is the most important protein of corn and has good film forming property. Composites structures of PP films coated with corn-zein were obtained through a simple solvent casting method. Polyethylene glycol (PEG) and glycerol (GLY) were used as plasticizer to increase film flexibility. Statistical analysis based on full factorial design was performed to observe coating formulation effects. The high water vapour barriers were obtained for films coated with coating formulation consisting of higher amounts of corn-zein plasticized by GLY. The lower glass transition temperatures (T g) of films were obtained by plasticization of films and T g decreased by increasing plasticizer content. The statistical analysis defined the key parameters of coating formulation that had major effects on the final properties of coated PP films as corn-zein, plasticizer concentration and plasticizer type. In conclusion, corn-zein coatings could have potential as an alternative to conventional synthetic polymers used in composite multilayer structures for food packaging applications.Article Citation - WoS: 35Citation - Scopus: 39Optimisation of the Effect of Colemanite as a New Synergistic Agent in an Intumescent System(Elsevier Ltd., 2006) Atikler, Ulaş; Demir, Hasan; Tokatlı, Figen; Tıhmınlıoğlu, Funda; Balköse, Devrim; Ülkü, SemraAn intumescent system including ammonium polyphosphate (APP) as an acid source and blowing agent, pentaerythritol (PER) as a carbonific agent and colemanite as a synergistic agent is used to enhance flame retardancy of polypropylene (FR-PP). In order to investigate the synergism between colemanite and the flame retardant materials (APP and PER), D-optimal mixture design was employed. The limiting oxygen index (LOI) and amount of residue (AoR) were accepted as response 1 and response 2, respectively. Applying D-optimal strategy, 18 experiments were performed. Filler content was fixed at 30 wt% of total amounts of flame retardant PP composites. Constraints were determined according to the ratio of APP/PER ranging between 1 and 3. Statistical analysis of the cubic model revealed that lack of fit (LoF) was not significant for the cubic and linear model for both responses. The model suggested an optimum composite formulation with concentration levels 65% of APP, 28% of PER and 7% of colemanite that gives an LOI of 40.3. The experimental LOI and AoR of optimum formulation were achieved as 39.3 and 21.4 with 2.5% and 2.2% errors, respectively.Conference Object Citation - WoS: 10Citation - Scopus: 13Preparation and Characterization of Polylactide-Hydroxyapatite Biocomposites(Trans Tech Publications, 2004) Gültekin, Naz; Tıhmınlıoğlu, Funda; Çiftçioğlu, Rukiye; Çiftçioğlu, Muhsin; Harsa, Hayriye ŞebnemIn the present study, the preparation and characterization of polylactide-Hydroxyapatite(HA) composite films for biomedical applications have been studied. The effects of number of parameters such as polymer type, HA loading, surface modification and its concentration on the mechanical and microstructural properties of the composites were investigated. Poly-L-Lactide and 96/4 Poly(L-Lactide co D-Lactide) copolymer-HA composites containing 10-40 wt% HA particles have been prepared by solvent casting technique. The HA powder was synthesized by precipitation technique. Interfacial interactions between HA and polylactide polymer were modified to improve filler compatibility and mechanical properties of the composites by surface treatment of the HA with two different silane coupling agents; 3-aminopropyltriemoxysilane (AMPTES) and 3-mercaptopropyltrimethoxysilane (MPTMS) at three different concentrations(0.5-2 wt%). Silane treatment indicated improvements in the mechanical properties of the composites compared to the untreated HA loaded polylactide composites. Tensile test results showed that the maximum improvement in the mechanical properties of the composites was obtained for PLA composites containing 1 wt% aminofunctional silane treated HA and 0.5-wt% mercaptopropyltrimethoxy silane treated HA for PDLA composites. Scanning electron microscopy studies also revealed better dispersion of silane treated HA particles in the polymer matrix.