Food Engineering / Gıda Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/12
Browse
7 results
Search Results
Conference Object Citation - Scopus: 1Short Wave Ultraviolet Light (uvc) Disinfection of Surface - Inhibition of Alicyclobacillus Acidoterrestris Spores on Agar Medium(Technical Research Center of Finland, 2008) Baysal, Ayşe Handan; Ünlütürk, SevcanAlicyclobacillus species are thermoacidophilic spoilage spore-formers found in soil. The spores can survive the normal hot fill processes that are carried out on commercial fruit juices. It seems likely that fruit in contact with soil are susceptible to contamination by Alicyclobacillus. Beverage ingredients e.g. liquid sugar are also a potential contamination sources. Alicyclobacillus has also been isolated from citrus processing lines.Conference Object Quantitative risk assessment models for food pathogens(Technical Research Center of Finland, 2009) Baysal, Ayşe Handan; Ünlütürk, SevcanRisk assessment (RA) which is a holistic approach involves hazard identification, exposure assessment, dose-response assessment, and risk characterization (Oscar, 2004). Microbiological risk assessments (MRAs) have been subdivided into four steps, which comprise, hazard identification, hazard characterization, exposure assessment and risk characterization. RAs are well developed for chemical hazards, and much effort has been put into the application of this type analysis to microbial food safety risks, especially for human foodborne diseases. The methods used for MRA, as well as the underlying concepts for evaluating risk derived from foodborne organisms and the effects of control measures on reducing risk are still new to many countries including developing countries. It is important to demonstrate examples of practical data generation and modelling even if they are limited in data size.Article Citation - WoS: 51Citation - Scopus: 58Rheological Properties of Liquid Egg Products (leps)(Taylor and Francis Ltd., 2008) Atılgan, Mehmet Reşat; Ünlütürk, SevcanRheological properties were determined at 4°C (refrigerated temperature), 25°C (room temperature), 60°C (pasteurization temperature) for liquid whole egg (LWE) and liquid egg yolk (LEY) and 4, 25, 55.6°C for liquid egg white (LEW) by using concentric cylinder viscometer. The shear rate range was 8 to 53.7 s-1 for LEW and LWE, and 1 to 34 s-1 for LEY. Selected physical properties (e.g., density) of LEPs were studied at broad range of temperatures from 4°C to 60°C. All liquid egg products (LEPs) exhibited mildly shear thinning (pseudoplastic) behavior. Experimental data of LWE and LEW successfully fitted Herschel-Bulkley model, LEY data were well described by power law model. LEW and LWE showed thixotropy and time-dependency at their pasteurization temperatures (55.6°C for LEW, 60°C for LWE) and considered being time-independent below these temperatures. LEY exhibited time-dependent behavior at 4°C and 60°C. But its rheological behavior showed no thixotropy and time-dependency at room temperature. The density of all three products decreased with increasing temperature. Density data were correlated by polynomial models (r2 > 0.99).Article Citation - WoS: 124Citation - Scopus: 144Use of Uv-C Radiation as a Non-Thermal Process for Liquid Egg Products (lep)(Elsevier Ltd., 2008) Ünlütürk, Sevcan; Atılgan, Mehmet Reşat; Baysal, Ayşe Handan; Tarı, CananThe efficacy of short wave ultraviolet light (UV-C) as a non-thermal process for liquid egg products (LEP) was investigated. Non-pathogenic Escherichia coli strain (ATCC 8739), which shows lower sensitivity to UV-C light than E. coli O157:H7 and Salmonella typhimurium, was chosen as a target microorganism. The inactivation of UV resistant strain of E. coli in LEP was examined by evaluating the effects of depth of liquid food medium (0.5, 0.3 and 0.153 cm), UV light intensity (1.314, 0.709 and 0.383 mW/cm2) and exposure time (0, 5, 10, and 20 min) by using a collimated beam apparatus. The best reduction (>2-log) was achieved in liquid egg white (LEW) when the fluid depth and UV intensity were 0.153 cm and 1.314 mW/cm2, respectively. Maximum inactivation was 0.675-log CFU/ml in liquid egg yolk (LEY) and 0.316-log CFU/ml in liquid whole egg (LWE) at the same conditions. The kinetics of UV inactivation of E. coli in LEP was nonlinear. Our results emphasize that UV-C radiation can be used as a pre-treatment process or combined with mild heat treatment to reduce the adverse effects of thermal pasteurization of LEP.Article Citation - WoS: 8Citation - Scopus: 8Differential Scanning Calorimetry as a Tool To Detect Antibiotic Residues in Ultra High Temperature Whole Milk(John Wiley and Sons Inc., 2009) Yıldız, Özge; Ünlütürk, SevcanDetection of penicillin G, ampicillin and tetracycline in ultra high temperature whole milk was studied by differential scanning calorimetry (DSC). Thermal parameters including the heat of fusion, the evaporation temperature, the heat of evaporation and the melting temperature obtained from DSC analysis were used to characterise thermal behaviour of antibiotic free milk samples and milk samples fortified with Penicillin G, Ampicillin and Tetracycline. DSC curves of these antibiotics at selected concentrations (0, 2, 4, 8 ppb for Penicillin G and Ampicillin; 0, 100, 250, 500 ppb for Tetracycline) show big endothermic peaks in the temperature range of -30 °C and 200 °C. It was concluded that the antibiotic concentration had a significant effect on the thermal parameters at a 95% confidence level. The differences between the melting temperatures and the peak areas in heat flow curves provided a basis for detection of antibiotic residues in UHT whole milk.Article Citation - WoS: 33Citation - Scopus: 37Relationship Between Morphology, Rheology and Polygalacturonase Production by Aspergillus Sojae Atcc 20235 in Submerged Cultures(Elsevier Ltd., 2006) Göğüş, Nihan; Tarı, Canan; Öncü, Şelale; Ünlütürk, Sevcan; Tokatlı, FigenA full factorial statistical design, with the factors of, two taxonomically different strains, seven types of seed culture formulations (slants) and two types of fermentation media were used to investigate the effect of these parameters on the morphology and polygalacturonase production. The rheology of the final fermentation medium was analyzed and appropriate mathematical model was applied to calculate suspension viscosity. It was found that most fermentation broths showed non-Newtonian flow behavior. According to statistical analysis, factors of strain types and fermentation media and the interaction between them were found significant on the enzyme activity. The effect of seed culture formulations (slants) were found insignificant at the significance level of 1%. Interaction of slants with strain types and fermentation media were also found insignificant. Considering the morphology of the final culture, Aspergillus sojae with the desired pellet morphology in a complex media, inoculated with a seed culture prepared from molasses resulted in maximum polygalacturonase enzyme activity (0.2 U/ml) and lowest suspension viscosity with a broth rheology close to Newtonian flow behavior.Article Citation - WoS: 30Citation - Scopus: 42Effect of Various Process Parameters on Morphology, Rheology, and Polygalacturonase Production by Aspergillus Sojae in a Batch Bioreactor(American Institute of Chemical Engineers, 2007) Öncü, Şelale; Tarı, Canan; Ünlütürk, SevcanThe effects of pH, agitation speed, and dissolved oxygen tension (DOT), significant in common fungal fermentations, on the production of polygalacturonase (PG) enzyme and their relation to morphology and broth rheology were investigated using Aspergillus sojae in a batch bioreactor. All three factors were effective on the response parameters under study. An uncontrolled pH increased biomass and PG activity by 27% and 38%, respectively, compared to controlled pH (pH 6) with an average pellet size of 1.69 ± 0.48 mm. pH did not significantly affect the broth rheology but created an impact on the pellet morphology. Similarly, at constant agitation speed the maximum biomass obtained at 500 rpm and at 30 h was 3.27 and 3.67 times more than at 200 and 350 rpm, respectively, with an average pellet size of 1.08 ± 0.42 mm. The maximum enzyme productivity of 0.149 U mL-1 h-1 was obtained at 200 rpm with an average pellet size of 0.71 ± 0.35 mm. Non-Newtonian and pseudoplastic broth rheology was observed at 500 rpm agitation speed, broth rheology exhibited dilatant behavior at the lower agitation rate (200 rpm), and at the medium agitation speed (350 rpm) the broth was close to Newtonian. Furthermore, a DOT range of 30-50% was essential for maximum biomass formation, whereas only 10% DOT was required for maximum PG synthesis. Non-Newtonian shear thickening behavior (n > 1.0) was depicted at DOT levels of 10% and 30%, whereas non-Newtonian shear thinning behavior (n < 1.0) was dominant at 50% DOT. The overall fermentation duration (50-70 h) was considerably shorter compared to common fungal fermentations, revealing the economic feasibility of this particular process. As a result this study not only introduced a new strain with a potential of producing a highly commercially significant enzyme but also provided certain parameters significant in the design and mathematical modeling of fungal bioprocesses.