Food Engineering / Gıda Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/12
Browse
11 results
Search Results
Article Determination of the Effects of Biomaterials on Human Peripheral Blood Mononuclear Cells (pbmc)(IOS Press, 2002) Sudağıdan, Mert; Güneş, Hatice; Harsa, ŞebnemArticle Citation - WoS: 3Citation - Scopus: 3Evaluation of High Hydrostatic Pressure Effects on Bovine Red Blood Cells and Platelets(Taylor and Francis Ltd., 2009) Ceylan, Çağatay; Severcan, Mete; Bozoğlu, Faruk; Severcan, FerideThe objective of this study was to investigate the effects of high hydrostatic pressure (HHP) on the stability of red blood cells (RBCs) and platelets. Bovine blood cells (n=5) were treated with the pressure of 55, 110, 154 and 220MPa at 25°C for 5min. Light microscopy, atomic force microscopy and flow cytometry studies revealed that RBCs were morphologically stable up until the 220MPa pressure treatments, at which surface modifications were observed. The platelets were found to be less stable than RBCs. HHP application did not cause any significant change in the signal intensity, band area and frequency values of the infrared bands with the exception that a significant variation was observed in the area of the cholesterol band. No statistically significant variations were observed in the secondary structure elements due to HHP treatment according to the artificial neural network study based on the FTIR data.Article Citation - WoS: 10Citation - Scopus: 11Colloid Deposition Experiments as a Diagnostic Tool for Biomass Attachment Onto Bioproduct Adsorbent Surfaces(John Wiley and Sons Inc., 2008) Tarı, Canan; Vennapusa, Rami Reddy; Cabrera, Rosa B.; Fernandez-Lahore, MarceloBackground: Detrimental processing conditions can be expected in any downstream operation where direct contacting between a crude feedstock and a reactive solid phase is supposed to occur. In this paper we have investigated the factors influencing intact yeast cells deposition onto anion and cation exchangers currently utilized for expanded-bed adsorption of biotechnological products. The aim of this study was twofold: (a)to confirm previous findings relating biomass deposition with surface energetics according to the extended Derjaguin, Landau, Verwey and Overbeek theory (XDLVO) theory; and (b) to provide a simple experimental tool to evaluate biomass deposition onto process surfaces. Results: Biomass deposition experiments were performed on an automated workstation utilizing a packedbed format. Two commercial ion exchangers intended for the direct capture of bioproducts in the presence of suspended biological particles were employed. Intact yeast cells in the late exponential phase of growth were selected as model bio-colloids. Cell deposition was systematically evaluated as a function of fluid-phase conductivity and quantitatively expressed as a biomass deposition parameter (α). Conclusion: α ≤ 0.15 was established as a criterion to reflect negligible biomass adhesion to the process support(s). Biomass deposition experiments further confirmed predictions made on the basis of free interfacial energy calculations as per the extended DLVO approach.Article Citation - WoS: 51Citation - Scopus: 55Kinetic Modelling of Lactic Acid Production From Whey by Lactobacillus Casei (nrrl B-441)(John Wiley and Sons Inc., 2006) Altıok, Duygu; Tokatlı, Figen; Harsa, Hayriye ŞebnemThe biomass growth, lactic acid production and lactose utilisation kinetics of lactic acid production from whey by Lactobacillus casei was studied. Batch fermentation experiments were performed at controlled pH and temperature with six different initial whey lactose concentrations (9-77 g dm-3) in a 3 dm3 working volume bioreactor. Biomass growth was well described by the logistic equation with a product inhibition term. In addition, biomass and product inhibition effects were defined with corresponding power terms, which enabled adjustment of the model for low- and high-substrate conditions. The Luedeking-Piret equation defined the product formation kinetics. Substrate consumption was explained by production rate and maintenance requirements. A maximum productivity of 2.5 g dm-3 h-1 was attained with an initial lactose concentration of 35.5 g dm-3.Article Citation - WoS: 30Citation - Scopus: 42Effect of Various Process Parameters on Morphology, Rheology, and Polygalacturonase Production by Aspergillus Sojae in a Batch Bioreactor(American Institute of Chemical Engineers, 2007) Öncü, Şelale; Tarı, Canan; Ünlütürk, SevcanThe effects of pH, agitation speed, and dissolved oxygen tension (DOT), significant in common fungal fermentations, on the production of polygalacturonase (PG) enzyme and their relation to morphology and broth rheology were investigated using Aspergillus sojae in a batch bioreactor. All three factors were effective on the response parameters under study. An uncontrolled pH increased biomass and PG activity by 27% and 38%, respectively, compared to controlled pH (pH 6) with an average pellet size of 1.69 ± 0.48 mm. pH did not significantly affect the broth rheology but created an impact on the pellet morphology. Similarly, at constant agitation speed the maximum biomass obtained at 500 rpm and at 30 h was 3.27 and 3.67 times more than at 200 and 350 rpm, respectively, with an average pellet size of 1.08 ± 0.42 mm. The maximum enzyme productivity of 0.149 U mL-1 h-1 was obtained at 200 rpm with an average pellet size of 0.71 ± 0.35 mm. Non-Newtonian and pseudoplastic broth rheology was observed at 500 rpm agitation speed, broth rheology exhibited dilatant behavior at the lower agitation rate (200 rpm), and at the medium agitation speed (350 rpm) the broth was close to Newtonian. Furthermore, a DOT range of 30-50% was essential for maximum biomass formation, whereas only 10% DOT was required for maximum PG synthesis. Non-Newtonian shear thickening behavior (n > 1.0) was depicted at DOT levels of 10% and 30%, whereas non-Newtonian shear thinning behavior (n < 1.0) was dominant at 50% DOT. The overall fermentation duration (50-70 h) was considerably shorter compared to common fungal fermentations, revealing the economic feasibility of this particular process. As a result this study not only introduced a new strain with a potential of producing a highly commercially significant enzyme but also provided certain parameters significant in the design and mathematical modeling of fungal bioprocesses.Article Citation - WoS: 68Citation - Scopus: 76Differentiation of Mixtures of Monovarietal Olive Oils by Mid-Infrared Spectroscopy and Chemometrics(John Wiley and Sons Inc., 2007) Gürdeniz, Gözde; Tokatlı, Figen; Özen, Fatma BanuFourier transform infrared (FT-IR) spectroscopy in combination with chemometric techniques has become a useful tool for authenticity determination of extra-virgin olive oils. Spectroscopic analysis of monovarietal extra-virgin olive oils obtained from three different olive cultivars (Erkence, Ayvalik and Nizip) and mixtures (Erkence-Nizip and Ayvalik-Nizip) of monovarietal olive oils was performed with an FT-IR spectrometer equipped with a ZnSe attenuated total reflection sample accessory and a deuterated tri-glycine sulfate detector. Using spectral data, principal component analysis successfully classified each cultivar and differentiated the mixtures from pure mono-varietal oils. Quantification of two different monovarietal oil mixtures (2-20%) is achieved using partial least square (PLS) regression models. Correlation coefficients (R2) of the proposed PLS regression models are 0.94 and 0.96 for the Erkence-Nizip and Ayvalik-Nizip mixtures, respectively. Cross-validation was applied to check the goodness of fit for the PLS regression models, and R 2 of the cross-validation was determined as 0.84 and 0.91, respectively, for the two mixtures.Article Citation - WoS: 40Citation - Scopus: 38Homofermentative Lactic Acid Bacteria of a Traditional Cheese, Comlek Peyniri From Cappadocia Region(Cambridge University Press, 2005) Bulut, Çisem; Güneş, Hatice; Okuklu, Burcu; Harsa, Hayriye Şebnem; Kılıç, Sevda; Çoban, Hatice S.; Yenidünya, Ali FazılComlek peyniri is a typical artisanal cheese in Central Anatolia. This type of cheese was made by using the indigenous lactic acid bacteria (LAB) flora of cow or ewes' milk. Majority of the samples were taken from fresh cheese because the aim was to isolate homofermentative LAB. Initially 661 microbial isolates were obtained from 17 cheese samples. Only 107 were found to be homofermentative LAB. These isolates were selected and identified by using both phenotypic and molecular methods. Phenotypic identification included curd formation from skim milk, catalase test, Gram staining and light microscopy, growth at different temperatures and salt concentrations, arginine hydrolysis, gas production from glucose, and carbohydrate fermentation. Molecular identification was based on the polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) of the 16S rRNA gene-ITS (internally transcribed spacer) region. By combining the phenotypic and molecular identification results, isolates belonging to each of the following genera were determined at species or subspecies level: 54 Lactococcus lactis subsp. lactis, 21 Enterococcus faecium, 3 Ec. faecalis, 2 Ec. durans, 10 Ec. sp., 15 Lactobacillus paracasei subsp. paracasei, and 2 Lb. casei strains. Technological characterisation was also performed by culturing each of the strains in UHT skim milk, and by monitoring pH change and lactic acid production at certain time intervals through the 24 h incubation. Results of the technological characterisation indicated that 33% of the isolates (35 strains) were capable of lowering the pH of UHT milk below 5.3 after 6 h incubation at 30°C. Thirty four of these strains were Lc. lactis subsp. lactis, and only one was an Ec. faecium strain.Article Citation - WoS: 39Citation - Scopus: 49Production of Antimicrobial Films by Incorporation of Partially Purified Lysozyme Into Biodegradable Films of Crude Exopolysaccharides Obtained From Aureobasidium Pullulans Fermentation(University of Zagreb, 2005) Kandemir, Nilay; Yemenicioğlu, Ahmet; Mecitoğlu, Çiğdem; Elmacı, Zehra Seda; Arslanoğlu, Alper; Göksungur, Mehmet Yekta; Baysal, TanerAntimicrobial films were produced by incorporating partially purified lysozyme into films of crude exopolysaccharides (59% pullulan) obtained from Aureobasidium pullulans fermentation. After film making, the films containing lysozyme at 100, 260, 520 and 780 μg/cm2 showed 23 to 70% of their expected enzyme activities. The highest recovery of enzyme activity (65-70%) after the film making was obtained in films prepared by incorporating lysozyme at 260 μg/cm2 (1409 U/cm2). The incorporation of disodium EDTA·2H2O and sucrose did not affect the initial lysozyme activity of the films significantly. With or without the presence of disodium EDTA·2H2O at 52 or 520 μg/cm2, lysozyme activity showed sufficient stability in the films during 21 days of cold storage. However, the presence of sucrose at 10 mg/cm2 in the films caused the destabilization of part of enzyme activity (almost 35%) at the end of storage. The combinational incorporation of lysozyme at 780 μg/cm 2 (4227 U/cm2) and disodium EDTA·2H2O at 520 μg/cm2 gave antimicrobial films effective on Escherichia coli. However, in the studied lysozyme concentration range the films did not show any antimicrobial activity against Lactobacillus plantarum. This study clearly showed that the partially purified lysozyme and crude exopolysaccharides from Aureobasidium pullulans may be used to obtain antimicrobial films to increase the safety of foods.Article Citation - WoS: 29Citation - Scopus: 32Optimization of Lactic Acid Production From Whey by L Casei Nrrl B-441 Immobilized in Chitosan Stabilized Ca-Alginate Beads(John Wiley and Sons Inc., 2005) Göksungur, Mehmet Yekta; Gündüz, Meltem; Harsa, Hayriye ŞebnemThe production of lactic acid from whey by Lactobacillus casei NRRL B-441 immobilized in chitosan-stabilized Ca-alginate beads was investigated. Higher lactic acid production and lower cell leakage were observed with alginate-chitosan beads compared with Ca-alginate beads. The highest lactic acid concentration (131.2 g dm-3) was obtained with cells entrapped in 1.3-1.7 mm alginate-chitosan beads prepared from 2% (w/v) Na-alginate. The gel beads produced lactic acid for five consecutive batch fermentations without marked activity loss and deformation. Response surface methodology was used to investigate the effects of three fermentation parameters (initial sugar, yeast extract and calcium carbonate concentrations) on the concentration of lactic acid. Results of the statistical analysis showed that the fit of the model was good in all cases. Initial sugar, yeast extract and calcium carbonate concentrations had a strong linear effect on lactic acid production. The maximum lactic acid concentration of 136.3 g dm-3 was obtained at the optimum concentrations of process variables (initial sugar 147.35 g dm-3, yeast extract 28.81 g dm-3, CaCO3 97.55 g dm-3). These values were obtained by fitting of the experimental data to the model equation. The response surface methodology was found to be useful in optimizing and determining the interactions among process variables in lactic acid production using alginate-chitosan-immobilized cells.Article Citation - WoS: 72Citation - Scopus: 83Batch Production of L(+) Lactic Acid From Whey by Lactobacillus Casei (nrrl B-441)(John Wiley and Sons Inc., 2004) Büyükkileci, Ali Oğuz; Harsa, Hayriye ŞebnemThe effects of temperature, pH, and medium composition on lactic acid production by Lactobacillus casei were investigated. The highest lactic acid productivity values were obtained at 37 °C and pH 5.5. The productivity was 1.87 g dm-3 h-1 at 37 °C in shake flasks. In the fermenter, a productivity of 3.97 g dm-3 h-1 was obtained at pH 5.5. The most appropriate yeast extract concentration was 5.0 g dm-3. Whey yielded a higher productivity value than the analytical lactose and glucose. Initial whey lactose concentration did not affect lactic acid productivity. MnSO4·H2O was necessary for lactic acid production by L casei from whey. Product yields were approximately 0.93 g lactic acid g lactose-1.