Food Engineering / Gıda Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/12
Browse
256 results
Filters
Settings
Search Results
Article Citation - WoS: 69Citation - Scopus: 89Pectinase Enzyme-Complex Production by Aspergillus Spp. in Solid-State Fermentation: a Comparative Study(Elsevier, 2012) Heerd, Doreen; Yeğin, Sırma; Tarı, Canan; Fernandez Lahore, MarceloA comparative evaluation of three Aspergillus species according to their pectinase production in solid-state fermentation was performed. Solid-state fermentation offers several potential advantages for enzyme production by fungal strains. Utilization of agricultural by-products as low-cost substrates for microbial enzyme production resulted in an economical and promising process. The pectinolytic enzyme activities of two Aspergillus sojae strains were compared to a known producer, Aspergillus niger IMI 91881, and to A. sojae ATCC 20235, which was re-classified as Aspergillus oryzae. Evaluation of polymethylgalacturonase and polygalacturonase activity was performed as well as exo- vs. endo-enzyme activity in the crude pectinase enzyme-complex of the mentioned strains. Furthermore, a plate diffusion assay was applied to determine the presence and action of proteases in the crude extracts. A. sojae ATCC 20235 with highest polymethylgalacturonase activity and highest polygalacturonase activity both exo- and endo-enzyme activity, is a promising candidate for industrial pectinase production, a group of enzymes with high commercial value, in solid-state fermentation processes. Beside the enzymatic assays a protein profile of each strain is given by SDS-PAGE electrophoresis and in addition species-specific zymograms for pectinolytic enzymes were observed, revealing the differences in protein pattern of the A. sojae strains to the re-classified A. oryzae. (C) 2011 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.Conference Object Citation - Scopus: 2Preparation and Characterization of Hydroxyapatite/Calcium Phosphate Powders(Trans Tech Publications, 2004) Şimşek, Deniz; Çiftçioğlu, Rukiye; Harsa, ŞebnemThe preparation of calcium phosphate based powders through chemical precipitation in order to determine the optimum conditions for the preparation of stoichiometric, thermally stable hydroxyapatite (HA) powders was investigated in this work. The effects of parameters like pH, aging time, and heat treatment temperature on the phase structure and morphology of the powders were investigated by SEM and XRD.HA was prepared at a Ca/P ratio of 1.67. The precipitation pH had a profound influence on the morphology and crystallite size of the powders in the 4-11 pH range. Relatively large 5 mum prismatic particles were obtained at low pH whereas the powders were formed from agglomerates of nano sized particles at high pH. Powders had a HA dominant phase structure above a pH of 8. Phase pure HA powders were obtained with close to theoretical yields at pH = 10 and 11. The crystallite sizes of the powders varied from about 30 nm at 90degreesC to 50-90 mn at 1250degreesC with the smallest crystallite sizes obtained for pH 10 and 11 powders at 1250degreesC. The crystallite size increased significantly with aging temperature.Conference Object Photoautotrophic and Heterotrophic Micropropagation of Sugarcane Shoots in Controlled Environments(2000) Ertürk, Handan; Walker, Paul N.We achieved successful growth and multiplication of sugarcane shoots in vitro under photoautotrophic conditions aseptically for three generations in our laboratory and proposed an experimental procedure for photoautotrophic micropropagation of sugarcane in controlled environment. The growth rate of photoautotrophic cultures in sugarless MS medium was found to be half of the growth rate of heterotrophic cultures in multiplication medium after a two-week period in the same environment. Contamination with algae in some vessels was recognized as a problem for septic photoautotrophic growth. Atrazine was found to be effective in controlling algae at a concentration of 10 ppm. But, atrazine in total was not considered to be a practical solution for the algae problem as it had a negative affect on the growth of shoots.Book Part Citation - Scopus: 4Bacteria: Arcobacter(Elsevier, 2014) Atabay, Halil İbrahim; Corry, Janet E.L.; Ceylan, ÇağatayThe genus Arcobacter currently comprises many phenotypically different species isolated from diverse niches. Although some Arcobacter spp. (particularly, Arcobacter butzleri, Arcobacter skirrowii, and Arcobacter cryaerophilus) are associated with various diseases in humans and animals, their exact epidemiological and pathological role is not completely understood, and few cases of human infection are reported. The primary mode of Arcobacter transmission is thought to occur via contaminated water and food and contact with pets. As some species are difficult to cultivate and all are difficult to identify using conventional biochemical tests, nucleic acid-based techniques such as polymerase chain reaction (PCR) and real-time PCR are increasingly used for their simultaneous detection, identification, and quantification. Their tendency to be resistant to antibiotics, and their ability to colonize food processing environments indicate that they could cause serious disease in the human population, particularly in susceptible individuals with impaired immune response. © 2014 Elsevier Inc. All rights reserved.Book Part Citation - Scopus: 6Quality Assessment of Aquatic Foods by Machine Vision, Electronic Nose, and Electronic Tongue(Wiley, 2010) Korel, Figen; Balaban, Murat ÖmerThe increase in demand for seafood products has catalyzed the desire for higher standards regarding safety and quality issues. Since seafoods are perishable, freshness is a major quality parameter to be considered [1,2]. There is no unique freshness or spoilage indicator for seafood, therefore combinations of selected indicators need to be used to evaluate freshness [3,4]. An important and widely used method to determine freshness is sensory evaluation [5]. The Quality Index Method (QIM) uses a demerit point scoring system [6] based on the evaluation of the important sensory attributes (odour, texture, and appearance) of fish and other aquatic foods. The sensory quality is expressed by the sum of the demerit points, and a linear correlation between these points and the storage time is used to predict the freshness of the target seafood [5,7,8]. The QIM has been developed for various seafood species and products, such as Atlantic mackerel (Scomber scombrus), horse mackerel (Trachurus trachurus), European sardine (Sardina pilchardus) [9], gilthead seabream (Sparus aurata) [10], farmed Atlantic salmon (Salmo salar) [11,12], and cod (Gadus morhua) [13], etc. Even though QIM is fast and reliable in determining the freshness of seafood, it still requires experts to evaluate the quality attributes. Alternatively, appearance, odour, and taste can be measured by machine vision system (MVS), electronic nose (e-nose), and electronic tongue (e-tongue), respectively.Article Citation - WoS: 7Citation - Scopus: 11Effects of Light, Carbon Dioxide, and Hormone Levels on Transformation To Photoautotrophy of Sugarcane Shoots in Micropropagation(American Society of Agricultural Engineers, 2000) Ertürk, Handan; Walker, Paul N.Sugarcane (Saccharum spp.) shoots were transferred from a heterotrophic micropropagation environment and cultured on sugar-free Murashige and Skoog (MS) salts medium in the controlled atmosphere of a growth chamber. The purpose was to achieve photoautotrophic shoot culture to be used for micropropagation. Effects on the shoots were tested for three factors: Carbon dioxide concentration, light level, and the hormone concentration of the growth medium. Factorial design was applied for the experiment such that all combinations of high and low factor levels were utilized, and the medium level of each factor level constituted the middle point of the design. All shoots were observed to become yellowish in color and lose vigor in the sugarless environment, although the successful treatments regained their color and vigor. Average dry weights of shoots per vessel were recorded at the end of two weeks as a quantitative measure of transformation of shoots to photoautotrophy. Light and CO2 levels were found to have statistically significant and positive effects. The negative effect of hormone concentration was insignificant.Article Citation - WoS: 64Citation - Scopus: 77Development of Flexible Antimicrobial Zein Coatings With Essential Oils for the Inhibition of Critical Pathogens on the Surface of Whole Fruits: Test of Coatings on Inoculated Melons(Elsevier, 2019) Boyacı, Derya; Iorio, Gianmarco; Sözbilen, Gözde Seval; Alkan, Derya; Trabattoni, Silvia; Pucillo, Flavia; Yemenicioğlu, AhmetThis study aimed to develop essential oil (EO)-containing antimicrobial coatings for the inhibition of pathogenic bacteria contamination on fruit peels. Incorporation of eugenol (EUG), carvacrol (CAR), and thymol (THY) into films at > 1% (w/w) eliminated the typical brittleness of zein films. However, EUG outperformed CAR and THY in terms of mechanical properties. Films with >= 2% (w/w) CAR and THY and >= 3% EUG showed clear zones against L. innocua and E. coli in agar medium at 37 degrees C. All EO-containing films also inhibited L. innocua and E. coli inoculated at their surfaces by minimum 3.9 and 2.7 decimal (D) within 1 day at 10 degrees C. Moreover, 2% EUG-containing zein coatings caused 2-3 decimal reduction in L. innocua and E. coli counts of inoculated melon surfaces at 10 degrees C. Unlike the bare zein coatings, flexible EUG-containing films on melons did not show cracking or detachment. Zein films loaded with EUG showed a highly hydrophilic surface. The best oxygen barrier performance was observed for the EUG-richest formulation (i.e., EUG at 3%), and this was attributed to a homogenizing effect of the EO that eventually led to a denser and hole-free network. This work suggested that flexible coatings of zein containing EOs could inhibit pathogens embedded in the rough peel surface of melons.Article Citation - WoS: 11Citation - Scopus: 10Ir Spectroscopy and Chemometrics for Physical Property Prediction of Structured Lipids Produced by Interesterification of Beef Tallow(Academic Press, 2019) Aktaş, Ayşe Burcu; Alamprese, Cristina; Fessas, Dimitrios; Özen, BanuThe aim of this study was the application of infrared spectroscopy and chemometrics to predict slip melting point (SMP), melting points at different melted fat percentages (MP85, MP90, MP95), and consistency of structured lipids to provide fast and reliable methods for their characterization. Tallow was chemically or enzymatically interesterified with corn, canola, or safflower oils, at different ratios. Fourier-transform mid-infrared (FT-IR) and near-infrared (FT-NIR) spectra of melted and solid samples were collected. Partial-least-square regression models constructed after different spectra pre-treatments and variable selection were satisfactory. The best models were obtained with solid sample FT-NIR spectra: in cross-validation, determination coefficients and root mean square errors were, respectively, 0.85 and 1.7 degrees C for SMP, 0.85 and 2.8 degrees C for MP90, and 0.91 and 14 MPa for consistency. Infrared spectroscopy can be considered a promising tool to determine physical properties of interesterified fats.Article Citation - WoS: 17Citation - Scopus: 23Pasteurization of Verjuice by Uv-C Irradiation and Mild Heat Treatment(Wiley, 2019) Kaya, Zehra; Ünlütürk, SevcanVerjuice is a highly acidic juice and more prone to yeast spoilage. In this study, the efficacy of individual and combination processes of UV-C irradiation (UV) and mild heat treatment (MH) for pasteurization of verjuice were assessed. Saccharomyces cerevisiae (NRRL Y-139) was selected as the target microorganism and kinetic parameters for MH, UV, and combined UV + MH inactivation treatments were determined. The UV treatment alone at a UV dose of 0.57 J/cm(2) (energy of 2.30 J/mL), provided only 0.54 +/- 0.02 log CFU/mL reduction of S. cerevisiae. In contrast, the combined treatment (UV + MH2) substantially reduced the number of S. cerevisiae in verjuice, 5.16 +/- 0.24 log CFU/mL reduction was achieved at 0.25 J/cm(2) UV dose (energy of 1.01 J/mL) and 51.25 +/- 1.47 degrees C. The percentage of synergism for the UV + MH inactivation of S. cerevisiae in verjuice was maximized at 51.25 degrees C (50.79% of synergistic effect). Inactivation kinetics of S. cerevisiae was best described by Weibull model with the smallest RMSE and AIC values. D value was decreased from 13.66 to 1.94 min when UV was combined with mild heating. The results showed that UV-C light assisted by mild heat treatment can be a potential alternative to thermal pasteurization of verjuice. Practical applications Fruit juices are prone to spoilage by yeasts, molds, and some acid-tolerant bacteria. Saccharomyces cerevisiae is a heat resistant spoilage microorganism and found in some spoiled juices. Thermal pasteurization is widely used for the preservation of fruit juices but results in losses of essential nutrients and changes in physicochemical and organoleptic properties. This study illustrated that the combined UV-C light assisted by mild heat treatment can deliver the required microbial reduction in verjuice. The synergistic effect of two processing methods is suggested for controlling the growth of spoilage microflora of fruit juices.Article Citation - WoS: 61Citation - Scopus: 70Use of Ftir and Uv-Visible Spectroscopy in Determination of Chemical Characteristics of Olive Oils(Elsevier, 2019) Uncu, Oğuz; Özen, Banu; Tokatlı, FigenIt was aimed to predict fatty acid ethyl ester (FAEE), wax, diacylglycerol (DAG) and color pigment contents of olive oils by using rapid and non-destructive spectroscopic techniques (FTIR and UV-vis) individually and in combination. Prediction models were constructed by using partial least squares (PLS) regression with cross and external validation. FAEEs were estimated best with FTIR + UV-Vis spectroscopy (R-cv.(2) = 0.84, R-pred(2) = 0.90, and RPD = 3.0). PLS model with R-cv.(2) = 0.79, R-pred(2) = 0.71, and RPD = 1.9 was obtained for the estimation of 1,2 DAG using FTIR spectral data. Major pigments, lutein, pheophytin a and their derivatives and total xanthophylls were quantified successfully by FTIR + UV-Vis with a range of R-cv.(2) of 0.71-0.85, R-pred(2) of 0.70-0.84, and RPD = 1.5-2.5 values but the prediction of the rest of the pigments were poor (R-cv(2) = 0.60-0.76, R-pred(2) = 0.42-0.62, and RPD = 1.2-1.5). Combination of two spectral data resulted in average prediction of wax content of oils (R-cal(2) = 0.95, R-pred(2) = 0.75, and RPD = 1.9). FTIR and UV-vis spectroscopic techniques in combination with PLS regression provided promising results for the prediction of several chemical parameters of olive oils; therefore, they could be alternatives to traditional analysis methods.