Architecture / Mimarlık
Permanent URI for this collectionhttps://hdl.handle.net/11147/24
Browse
19 results
Search Results
Article Citation - Scopus: 1Factors Affecting Tourist Visits To Archaeological Sites in Turkey: a Spatial Regression Analysis(Lodz University Press, 2023) Toköz, Ö.D.; Avci, A.B.; Duran, H.E.The study focuses on the factors affecting visitor numbers to archaeological sites in Turkey. The aim is to investigate the geographical, economic, and demographic factors underlying the visits using statistical methods. The study covers 117 archaeological site visits in 2019. Although existing studies analysed determinants of visits to archaeological sites of different countries, the evidence needs to be explicit. Methodologically, the classical linear regression models are primarily applied in the literature, whereas the incorporation of spatial dependence has largely been ignored. This study contributes to the literature by employing demographic, economic, and climatic factors and spatial relations between the sites. Therefore, spatial autoregressive (SAR) and spatial error models (SEM) are developed in the analyses. According to the results, WHL inscription and distance to the city centre are crucial factors for the visits. In addition, the study emphasizes the significant negative effect of spatial dependence on visitor numbers of archaeological sites near each other. © by the author, licensee Łódź University – Łódź University Press, Łódź, Poland.Article Citation - Scopus: 6A Field Study on Adaptive Thermal Comfort in a Naturally Ventilated Design Studio Class in the Post-Pandemic Period(Universiti Putra Malaysia Press, 2022) Pekdoğan, Tuğçe; Avcı, Ali BerkayDesign studios are where design students spend most of their time learning theory and practices. For this reason, thermal comfort conditions in studios are crucial to provide a suitable environment for education. Especially in the post-pandemic period, thermal comfort conditions have become more critical in educational buildings. The present study focuses on the adaptive thermal comfort condition in an architectural design studio in the Mediterranean climate of Izmir/Turkey. The study aims to evaluate the comfort conditions of the students and determine the effect of mask use on thermal sensation in the post-pandemic period. For this purpose, air temperature, relative humidity, and air velocity measurements were collected during the studio hours in the spring semester when the heating and cooling systems were not working. Additionally, a thermal sensation survey was conducted with 42 students. The results showed that the thermal comfort level was within the 90% acceptability limits according to the ASHRAE Standard-55. According to the survey results, the use of masks by the students did not have a significant effect on thermal perception. © 2022, Alam Cipta. All Rights Reserved.Article Citation - WoS: 5Citation - Scopus: 6An Investigation of the Design Process's Effect on a High-Performance Building's Actual Energy System Performance(Ios Press, 2022) Terim Çavka, Belgin; Çavka, Hasan Burak; Salehi, M. MahdiThe design intent and the performance targets of projects may sometimes fail to match a building's actual post-occupancy performance. The mismatch of intended and actual building performance can be attributed to multifarious reasons. This study focuses on the role of project decisions made during design as one of the reasons of shortfall. The aim of the study is to unveil the design decision-making process of a state-of-the-art research building through the analysis of project's available set of IDP (Integrated Design Process) documentation. To understand the relationship and correlation between the energy performance gap and the decision-making process of the case building, we investigated the design decisions' effect on the actual performance. The particular emphasis is on the decisions that were based on assumptions rather than measured actual test data for the proposed innovative building systems. The designed heat recovery system, which was dependent on recovered heat from the neighboring research building, had a significant effect on the building's poor energy performance. We investigated collected project data from coordination meetings, thoroughly analyzed project documentation, and quantified the building's actual energy performance data. The analysis of the project information shows the ripple effect of decisions that were made based on assumptions, that triggered shortfalls in the building's overall actual performance. Our qualitative analysis indicates that the poor system performance during operations was related with the design decisions that were not based on the measurement of the actual performance of the existing systems in the neighboring building. The performance of the heat recovery from the neighboring building as a highly dependent Energy Conservation Measure (ECM) analyzed through collected documents and data. The ambiguity of the available heat potential from the neighboring building and related testing issues defined on an explanatory timeline of process coding. The conclusion includes recommendations for the design decision-making process for innovative system integrations for high-performance buildings, and underlines the importance of IDP for complex buildings.Data Paper Dataset of Virtual and Real-Life Visual Experiences Inside a Museum: Survey on Visual Perception With Objective and Subjective Measures(Elsevier, 2023) Salvadori, Giacomo; Tambellini, Giuseppe; Çevik, Aslıhan; Kazanasmaz, Zehra Tuğçe; Leccese, FrancescoOccupants’ perception of a space depends on their experience [1–3]. Four kinds of visiting experiences were carried out inside the Natural History Museum of the University of Pisa [4]. The museum is housed, together with the National Museum of the Charterhouse [5], inside the Monumental Charterhouse of Calci, near Pisa. Four of the permanent exhibition halls of the Museum were selected for the survey: Historical Gallery, Mammal's Hall, Ungulates’ Gallery and Cetaceans’ Gallery. A total of 117 participants were divided into four groups depending on their visiting experience: real-life, or virtual based respectively on videos, photos or computer-generated photorealistic images (renders). Experiences are compared. The comparison comprehends objective data (measured illuminance levels) and subjective data (questionnaire outcomes on the perception of the space). The illuminance levels were measured using a photoradiometer: datalogger Delta Ohm HD2102.2 equipped with LP 471 PHOT probe. The probe was placed 1.20 m above floor level, and it was set to measure vertical illuminance at 10 seconds intervals. To evaluate participants’ perception of the space questionnaires were used. The presented data refer to the article: “Perception of light in museum environments: comparison between real-life and virtual visual experiences” [1]. This kind of data provides a base to assess if virtual kinds of experience can be implemented in museum environments as an alternative to the real-life experience, and to understand if such an implementation is detrimental or not in terms of participants’ perception of the space. Virtual experiences can be particularly useful for spreading culture, making it accessible even in presence of moving restrictions for people, such as those in force today due to the SARS-CoV-2 emergency.Article Geleneksel Konutlarda Günışığı Aydınlığının Değerlendirilmesi: Kula Geleneksel Konutlarında Başoda(Gazi Üniversitesi, 2023) Battal, Cansu; Kazanasmaz, Zehra Tuğçe; İpekoğlu, BaşakDaylighting is one of the main factors among the features that determine the original space qualities in traditional houses. Illuminating the space with daylight also determines its ambience. Daylighting criteria should be considered among the features to be preserved in the usage decisions. In traditional dwellings in Anatolia, the main room is the most lavish room, which has projections and is surrounded by windows on three sides. Therefore, in the buildings which are conserved for reuse, the main room should maintain its original daylighting features. The aim of this study is to draw attention to the maintenance of daylighting features in the restoration decisions of traditional dwellings. Within the scope of the study, daylight performance of the main rooms of Kaçiklar and Zabunlar Houses selected in Kula, Manisa was evaluated. The daylight illuminance of the main rooms was measured during the four seasons; by calculating the ratio of the window area to the floor and wall areas, reflectance of surface materials and normal-normal transmittance of window glass were calculated. Results showed that daylight illuminance of the main room in Kaçiklar House was not sufficient for all four seasons, while it was in Zabunlar House. As a result, while the restoration decisions are developed, opening the closed window in the main room of Kaçiklar House, cleaning the paint on the top windows and and selecting a light-coloured wall finishing material will increase the reflectance value and will positively affect the daylight illuminance; in Zabunlar House, on the other hand, removing the existing wooden glazing in the sofa in order to increase the daylight provided through the sofa and increasing the reflectance value by choosing a light-coloured wall finishing material will increase the daylight illuminance of the main room.Article Citation - WoS: 2Citation - Scopus: 3The Integrating Role of Regional Spatial Planning: Five Mechanisms of Policy Integration(Liverpool University Press, 2022) Bafarasat, Abbas Ziafati; Baker, Mark; Growe, AnnaPolicy integration is considered an essential condition for constructing a more sustainable society, but proponents of sustainable development differ in their views about what is to be integrated, what is to be developed, how to link environment and development, and for how long a time. Regional spatial planning has been a locus of attempts to resolve these differences and realise policy integration, but its mechanisms to achieve this remain less explored. This study sets out to meet three objectives as follows: (1) to identify, through a systematic literature review, a broad set of mechanisms by which (regional) spatial planning realises joined-up policy making; (2) to illustrate the identified mechanisms in two distinct spatial planning systems, Germany and England; and (3) to generate insights into factors that contribute to, and confine, the identified mechanisms. The findings identify five integrating mechanisms of spatial planning that could inform plan making, analysis and monitoring and provide lessons about the potential and constraints of these mechanisms in different social, institutional and political contexts.Article Citation - WoS: 7Review of Literature for the Concept of Post-Disaster Housing in Turkey(Gazi University, 2008) Baradan, BernaThere have been implementations of post-disaster housing even in historical ages and mentioned in studies concerning a specific period in time in which the disaster occurred in Turkey. With a brief overview of such history of post-disaster housing, the studies were reviewed based on the relationship between approaches and time periods concerning the architectural literature of post-disaster housing in Turkey between 1977 and 2005. There are mainly two types of architectural studies about this concept; observations and analyses about the general policy in Turkey, and case specific studies. These two types of studies can also classified within their writing style as well; descriptive style and analytical style of writing is used for a basis for the comparison of approaches used in the studies. The term ‘architectural literature’ used in this article were used for the works published by the architects and/or studies published in architectural magazines. From this analysis, it could be concluded that the architectural society in Turkey changed its point of view to more humanistic solutions in post-disaster housing after the 1999 Marmara Earthquake.Article Citation - WoS: 5Citation - Scopus: 5Loop Based Classification of Planar Scissor Linkages(Springer, 2022) Kiper, Gökhan; Korkmaz, Koray; Gür, Şebnem; Yar Uncu, Müjde; Maden, Feray; Akgün, Yenal; Karagöz, CevahirScissor linkages have been used for several applications since ancient Greeks and Romans. In addition to simple scissor linkages with straight rods, linkages with angulated elements have been introduced in the last decades. In the related literature, two methods have been used to design scissor linkages, one of which is based on scissor elements, and the other is based on assembling loops. This study presents a systematic classification of scissor linkages as assemblies of rhombus, kite, dart, parallelogram and anti-parallelogram loops using frieze patterns and long-short diagonal connections. After the loops are replicated along a curve as a pattern, the linkages are obtained by selection of proper common link sections for adjacent loops. The resulting linkages are analyzed for their motions and they are classified as realizing scaling deployable, angular deployable or transformable motion. Some of the linkages obtained are novel. Totally 10 scalable deployable, 1 angular deployable and 8 transformable scissor linkages are listed. Designers in architecture and engineering can use this list of linkages as a library of scissor linkage topologies.Data Paper Citation - WoS: 3Citation - Scopus: 4Experimental data showing the thermal behavior of a flat roof with phase change material(Elsevier, 2015) Tokuç, Ayça; Başaran, Tahsin; Yesügey, Sadık CengizThe selection and configuration of building materials for optimal energy efficiency in a building require some assumptions and models for the thermal behavior of the utilized materials. Although the models for many materials can be considered acceptable for simulation and calculation purposes, the work for modeling the real time behavior of phase change materials is still under development. The data given in this article shows the thermal behavior of a flat roof element with a phase change material (PCM) layer. The temperature and energy given to and taken from the building element are reported. In addition the solid-liquid behavior of the PCM is tracked through images. The resulting thermal behavior of the phase change material is discussed and simulated in [1] A. Tokuç, T. Başaran, S.C. Yesügey, An experimental and numerical investigation on the use of phase change materials in building elements: the case of a flat roof in Istanbul, Build. Energy, vol. 102, 2015, pp. 91-104.Article Citation - WoS: 21Citation - Scopus: 21Retrofit Strategies for Energy Efficiency of Historic Urban Fabric in Mediterranean Climate(MDPI, 2020) Ulu, Meltem; Durmuş Arsan, Zeynep; Arsan, Zeynep DurmuşEnergy-efficient retrofitting of historic housing stock requires methodical approach, in-depth analysis and case-specific regulatory system, yet only limited efforts have been realized. In large scale rehabilitation projects, it is essential to develop a retrofit strategy on how to decide energy-efficient solutions for buildings providing the most energy saving in a short time. This paper presents a pilot study conducted at a neighborhood scale, consisting of 22 pre-, early-republican and contemporary residential buildings in a historic urban fabric in the Mediterranean climate. This study aims to develop an integrated approach to describe case-specific solutions for larger scale historic urban fabric. It covers the building performance simulation (BPS) model and numerical analysis to determine the most related design parameters affecting annual energy consumption. All the case buildings were classified into three main groups to propose appropriate retrofit solutions in different impact categories. Retrofit solutions were gathered into two retrofit packages, Package 1 and 2, and separately, three individual operational solutions were determined, considering a five-levelled assessment criteria of EN 16883:2017 Standard. Energy classes of case buildings were calculated based on National Building Energy Regulations. Changes in building classes were evaluated considering pre- and post-retrofit status of the buildings. For the integrated approach, the most related design parameters on annual energy consumption were specified through Pearson correlation analysis. The approach indicated that three buildings, representing each building group, can initially be retrofitted. For all buildings, while maximum energy saving was provided by Package 2 with 48.57%, minimum energy saving was obtained from Package 1 with 19.8%.