Architecture / Mimarlık
Permanent URI for this collectionhttps://hdl.handle.net/11147/24
Browse
6 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 5Loop Based Classification of Planar Scissor Linkages(Springer, 2022) Kiper, Gökhan; Korkmaz, Koray; Gür, Şebnem; Yar Uncu, Müjde; Maden, Feray; Akgün, Yenal; Karagöz, CevahirScissor linkages have been used for several applications since ancient Greeks and Romans. In addition to simple scissor linkages with straight rods, linkages with angulated elements have been introduced in the last decades. In the related literature, two methods have been used to design scissor linkages, one of which is based on scissor elements, and the other is based on assembling loops. This study presents a systematic classification of scissor linkages as assemblies of rhombus, kite, dart, parallelogram and anti-parallelogram loops using frieze patterns and long-short diagonal connections. After the loops are replicated along a curve as a pattern, the linkages are obtained by selection of proper common link sections for adjacent loops. The resulting linkages are analyzed for their motions and they are classified as realizing scaling deployable, angular deployable or transformable motion. Some of the linkages obtained are novel. Totally 10 scalable deployable, 1 angular deployable and 8 transformable scissor linkages are listed. Designers in architecture and engineering can use this list of linkages as a library of scissor linkage topologies.Article Citation - WoS: 19Citation - Scopus: 20A Critical Review on Classification and Terminology of Scissor Structures(Int. Association for Shell and Spatial Structures, 2019) Maden, Feray; Akgün, Yenal; Kiper, Gökhan; Gür, Şebnem; Yar, Müjde; Korkmaz, KorayWhen the existing literature on the research of scissor structures is thoroughly investigated, it is seen that different researchers use different terminologies and classifications especially for the definition of the primary units and the motion type. Some of the studies define the whole geometry based on the geometric properties of the primary scissor units and the unit lines while some other studies define it according to the loops. All these studies use different names for similar elements. This article aims to review the literature on the classification and terminology of scissor structures and represent the state of art on the studies. Tables are represented showing all approaches in the literature. In addition, the article criticizes the missing points of each terminology and definition, and proposes some new terminology. In order to arrive at this aim, different definitions of the primary scissor units and motion types used in key studies in the literature are investigated thoroughly. With several examples, it is demonstrated that naming the scissor units according to the resulting motion type might be misleading and it is better to specify the motion type for the whole structure. A classification for transformation of planar curves is presented.Article Citation - WoS: 6Citation - Scopus: 5Design of Anti-Parallelogram Loop Assemblies(Int. Association for Shell and Spatial Structures, 2019) Gür, Şebnem; Korkmaz, Koray; Kiper, GökhanScissor mechanisms are frequently used for deployable structures and many studies have been conducted on the subject. Most of the studies consider scissor units as modules in the design process. An alternative approach is to utilize loops as the modules for design. In this paper, the design alternatives of single degree-of-freedom planar linkages comprising anti-parallelogram loops using the loop assembly method is presented. First, scissor mechanisms are reviewed. Next, the types of four-bar loops and the resulting linkages in the literature are introduced and those which are yet to be explored, anti-parallelogram being one of them, are identified. Then the loop assembly method and the examples in the literature are reviewed. As a method to form as many alternatives as possible, symmetry operations are proposed. Suitable frieze symmetry groups utilized for obtaining the assemblies are explained and the anti-parallelogram loop patterns are derived. Next, the single degree-of-freedom linkages are obtained from the loop assemblies. Finally, a selection of the resulting linkages with novel properties are presented. This study shows that loop assemblies are efficient in systematic type synthesis of scissor linkages, some types of which could not be foreseen by using units as modules.Article Citation - WoS: 75Citation - Scopus: 95A Review of Planar Scissor Structural Mechanisms: Geometric Principles and Design Methods(Taylor and Francis Ltd., 2011) Maden, Feray; Korkmaz, Koray; Akgün, YenalThis study deals with a review of planar scissor structural mechanisms (SSMs) and reports on how they can be easily transformed from a stowed to a deployed configuration. These mechanisms have an important transformation capacity of their extension and rotation properties, and many examples have been proposed that vary in size, type and geometry. Although there are many studies dealing with designing new planar or spatial SSMs and their calculation methods, there is no systematic study demonstrating the basic typologies, geometric principles, design rules and constraints of such SSMs. Further, current calculation methods are based on the inductive approach in which the dimension of one scissor unit (SU) is given, but the span of the whole structure is found later according to the number of SUs that are used to assemble the structure. However, this approach is not convenient for architectural applications, because it requires a deductive approach in which the dimensions and required number of SUs are calculated according to defined span length. On the basis of this concept, this article, first, analyses the geometric design of SSMs systematically in terms of their possible configurations and then develops trigonometric calculation methods for different types of SSMs, using a deductive approach.Article Citation - WoS: 59Citation - Scopus: 66A Novel Concept of Convertible Roofs With High Transformability Consisting of Planar Scissor-Hinge Structures(Elsevier Ltd., 2010) Akgün, Yenal; Gantes, Charis J.; Kalochairetis, Konstantinos E.; Kiper, GökhanIn this paper, a new adaptive scissor-hinge structure is introduced, which can be converted by means of actuators between a multitude of curvilinear arch-like shapes, where it can be stabilized and carry loads. The key point of this new structure is the proposed Modified Scissor-Like Element (M-SLE). With the development of this element, it becomes possible to change the geometry of the whole system without changing the dimensions of the struts or the span. The proposed scissor-hinge structure discussed here is planar, but it is also possible to combine structures in groups to create spatial systems. After outlining the differences of the proposed structure with existing designs, the dimensional properties of the M-SLE are introduced. Then, geometric principles and shape limitations of the whole structure are explained. Finally, structural analysis of the structure in different geometric configurations is performed, in order to discuss stiffness limitations associated with the advantage of increased mobility. © 2010 Elsevier Ltd.Book Part Citation - WoS: 9Citation - Scopus: 10Kinematic Design of a Reconfigurable Deployable Canopy(Springer Verlag, 2014) Kiper, Gökhan; Gürcü, Fulya; Korkmaz, Koray; Söylemez, EresA reconfigurable and deployable mechanism is proposed for a canopy which can also be used as a tent or a semi-open structure. The proposed single degree-of-freedom mechanism has four as-sembly modes. The conditions for deployment and reconfiguration of the mechanism are derived. These conditions impose three equality and two inequality constraints on the 11 design parameters of the mechanism. A virtual model of the mechanism is constructed in Excel for design and simulation purposes. A computational case study is presented.