Architecture / Mimarlık
Permanent URI for this collectionhttps://hdl.handle.net/11147/24
Browse
10 results
Search Results
Now showing 1 - 10 of 10
Data Paper Dataset of Virtual and Real-Life Visual Experiences Inside a Museum: Survey on Visual Perception With Objective and Subjective Measures(Elsevier, 2023) Salvadori, Giacomo; Tambellini, Giuseppe; Çevik, Aslıhan; Kazanasmaz, Zehra Tuğçe; Leccese, FrancescoOccupants’ perception of a space depends on their experience [1–3]. Four kinds of visiting experiences were carried out inside the Natural History Museum of the University of Pisa [4]. The museum is housed, together with the National Museum of the Charterhouse [5], inside the Monumental Charterhouse of Calci, near Pisa. Four of the permanent exhibition halls of the Museum were selected for the survey: Historical Gallery, Mammal's Hall, Ungulates’ Gallery and Cetaceans’ Gallery. A total of 117 participants were divided into four groups depending on their visiting experience: real-life, or virtual based respectively on videos, photos or computer-generated photorealistic images (renders). Experiences are compared. The comparison comprehends objective data (measured illuminance levels) and subjective data (questionnaire outcomes on the perception of the space). The illuminance levels were measured using a photoradiometer: datalogger Delta Ohm HD2102.2 equipped with LP 471 PHOT probe. The probe was placed 1.20 m above floor level, and it was set to measure vertical illuminance at 10 seconds intervals. To evaluate participants’ perception of the space questionnaires were used. The presented data refer to the article: “Perception of light in museum environments: comparison between real-life and virtual visual experiences” [1]. This kind of data provides a base to assess if virtual kinds of experience can be implemented in museum environments as an alternative to the real-life experience, and to understand if such an implementation is detrimental or not in terms of participants’ perception of the space. Virtual experiences can be particularly useful for spreading culture, making it accessible even in presence of moving restrictions for people, such as those in force today due to the SARS-CoV-2 emergency.Article Citation - WoS: 2Citation - Scopus: 3The Integrating Role of Regional Spatial Planning: Five Mechanisms of Policy Integration(Liverpool University Press, 2022) Bafarasat, Abbas Ziafati; Baker, Mark; Growe, AnnaPolicy integration is considered an essential condition for constructing a more sustainable society, but proponents of sustainable development differ in their views about what is to be integrated, what is to be developed, how to link environment and development, and for how long a time. Regional spatial planning has been a locus of attempts to resolve these differences and realise policy integration, but its mechanisms to achieve this remain less explored. This study sets out to meet three objectives as follows: (1) to identify, through a systematic literature review, a broad set of mechanisms by which (regional) spatial planning realises joined-up policy making; (2) to illustrate the identified mechanisms in two distinct spatial planning systems, Germany and England; and (3) to generate insights into factors that contribute to, and confine, the identified mechanisms. The findings identify five integrating mechanisms of spatial planning that could inform plan making, analysis and monitoring and provide lessons about the potential and constraints of these mechanisms in different social, institutional and political contexts.Article Generating Plan Layouts: a Case Study on Visualization of Implicit Knowledge by “doctor Architects”(SAGE Publications, 2022) Kasalı, AltuğAim: This article presents an opportunistic case with particular focus on instances from an extended procurement operation in which medical professionals run a proactive process involving the generation of layouts through distinct modes of representational practices without any actual collaboration with designers. The questions of inquiry involve an analysis on how the visualizations came into being and a discussion into the content of drawings that was shaped by individuals without any formal design education. Background: Although the literature introduces examples of genuine participation, particularly in healthcare design practices, the instances in which nondesigners demonstrate accomplished skills in spatial reasoning and representation are limited. Method: The research was formulated as a qualitative case study including a series of observations of the activities of the participants followed by interviews recorded at different locations. The investigation also focuses on the features of these authentic graphics which illustrate the intentions of the medical professionals concerning the function of spaces. Results: In this research, the participants went through a labor intensive and elaborate effort to produce “architectural representations” with the intention to convey their implicit professional expertise in the domain. The layouts were introduced to be the vital elements to visualize the implicit knowledge regarding the functioning of space. Conclusions: The productive and creative engagement of clinicians within this research makes the case for a multidisciplinary approach that reframes the limits and potential contributions of participants alongside drawings, which are exclusively claimed by and strategically employed by architects as negotiation devices within participatory design processes.Data Paper Citation - WoS: 3Citation - Scopus: 4Experimental data showing the thermal behavior of a flat roof with phase change material(Elsevier, 2015) Tokuç, Ayça; Başaran, Tahsin; Yesügey, Sadık CengizThe selection and configuration of building materials for optimal energy efficiency in a building require some assumptions and models for the thermal behavior of the utilized materials. Although the models for many materials can be considered acceptable for simulation and calculation purposes, the work for modeling the real time behavior of phase change materials is still under development. The data given in this article shows the thermal behavior of a flat roof element with a phase change material (PCM) layer. The temperature and energy given to and taken from the building element are reported. In addition the solid-liquid behavior of the PCM is tracked through images. The resulting thermal behavior of the phase change material is discussed and simulated in [1] A. Tokuç, T. Başaran, S.C. Yesügey, An experimental and numerical investigation on the use of phase change materials in building elements: the case of a flat roof in Istanbul, Build. Energy, vol. 102, 2015, pp. 91-104.Article Citation - WoS: 21Citation - Scopus: 21Retrofit Strategies for Energy Efficiency of Historic Urban Fabric in Mediterranean Climate(MDPI, 2020) Ulu, Meltem; Durmuş Arsan, Zeynep; Arsan, Zeynep DurmuşEnergy-efficient retrofitting of historic housing stock requires methodical approach, in-depth analysis and case-specific regulatory system, yet only limited efforts have been realized. In large scale rehabilitation projects, it is essential to develop a retrofit strategy on how to decide energy-efficient solutions for buildings providing the most energy saving in a short time. This paper presents a pilot study conducted at a neighborhood scale, consisting of 22 pre-, early-republican and contemporary residential buildings in a historic urban fabric in the Mediterranean climate. This study aims to develop an integrated approach to describe case-specific solutions for larger scale historic urban fabric. It covers the building performance simulation (BPS) model and numerical analysis to determine the most related design parameters affecting annual energy consumption. All the case buildings were classified into three main groups to propose appropriate retrofit solutions in different impact categories. Retrofit solutions were gathered into two retrofit packages, Package 1 and 2, and separately, three individual operational solutions were determined, considering a five-levelled assessment criteria of EN 16883:2017 Standard. Energy classes of case buildings were calculated based on National Building Energy Regulations. Changes in building classes were evaluated considering pre- and post-retrofit status of the buildings. For the integrated approach, the most related design parameters on annual energy consumption were specified through Pearson correlation analysis. The approach indicated that three buildings, representing each building group, can initially be retrofitted. For all buildings, while maximum energy saving was provided by Package 2 with 48.57%, minimum energy saving was obtained from Package 1 with 19.8%.Data Paper Citation - WoS: 2Citation - Scopus: 3Assessing Museums' Daylighting Adequacy Without Annual Measurement Campaign: Dataset of a Confrontation Between Measured and Simulated Illuminance Values Inside the Cetacean Gallery of the Charterhouse of Calci(Elsevier Ltd., 2020) Leccese, Francesco; Salvadori, Giacomo; Tambellini, Giuseppe; Kazanasmaz, Zehra TuğçeLighting Cultural Heritage is a complex task: light is necessary for the act of seeing, it can even enhance the visual experience [1,2], in addition proper lighting can significantly cut down energy consumptions [3], but on the same time it has detrimental effects on exhibits, especially daylight. In order to safeguard the exhibits from damages, national and international standards provide specific recommendations for exhibits' exposure, based on their photosensitivity category. These recommendations are the annual luminous exposure(LO) and the Maximum Illuminance Level (E-max), museums' curators have to verify that the display lighting conditions comply with the standards. Historical buildings are often converted into museums but, as their original purpose was different, the lighting conditions are often inadequate (e.g. too much uncontrolled daylight), therefore the lighting conditions' adequacy of the space should be assessed [4]. As the name suggest the annual luminous exposure requires an annual monitoring campaign, unfortunately it often happens that exhibits have been exposed incorrectly for prolonged periods, and therefore it is very important to evaluate the need of a fast intervention. In this casuistry a prolonged measurement campaign is not acceptable. Simulations can help running a great number of analysis while reducing the length and expenses of a measurements campaign, however their previsions must be validated. This paper provides the data acquired through measurements and simulations inside the Cetacean Gallery of the Monumental Charterhouse of Calci, near Pisa (Tuscany Region, Italy). The data comprehends horizontal and vertical illuminance measurements, recorded on December the 6th, and simulations run in Grasshopper with the plugins Honeybee+ and Ladybug. The data are related to the research article entitled "Application of climate-based daylight simulation to assess lighting conditions of space and artworks in historical buildings: the case study of Cetacean Gallery of the Monumental Charterhouse of Calci", published on the Journal of Cultural Heritage [5]. (C) 2020 The Author(s). Published by Elsevier Inc.Article Citation - WoS: 10Citation - Scopus: 11Analysis of the Relationship Between Daylight Illuminance and Cognitive, Affective and Physiological Changes in Visual Display Terminal Workers(SAGE Publications Inc., 2019) Öner, Merve; Kazanasmaz, Zehra Tuğçe; Leccese, F.; Salvadori, G.This study explored the impact of daylight illuminance on cognitive load during visual display terminal use by means of various physiological, performance and subjective measures. Repeated-measures design was adopted to identify the impact of variations in daylight levels that were manipulated through the shading system configurations (shading-on; shading-off). A total of 30 subjects performed visual and cognitive demanding tests. Performance measures were supported by subjective data and eye-related measures during the experimental analysis. Results revealed that the use of a shading system had positive impact on sustained attention. Concerning ocular measures, percentage of eye closure values showed opposite tendencies among vigilance and sustained attention demanding tests. Eye aspect ratio-max and blink duration were significantly correlated with reported glare sensation. In all tests, eye aspect ratio-max was found significantly higher in lower illuminances. Search velocity was significantly correlated with ocular variables in higher illuminances whereas sustained attention showed an opposite trend. This, initially, explains that even slight differences in daylight illuminance might have distinctive effects on the relationship between different groups of assessment variables while measuring cognitive load. Secondly, it proves the significance of carrying out sensitive experiments in terms of both light levels and test characteristics.Article Citation - WoS: 9A Fuzzy Logic Model for Benchmarking the Knowledge Management Performance of Construction Firms(NRC Research Press, 2011) Kale, Serdar; Karaman, Erkan A.Knowledge management is rapidly becoming a key organizational capability for creating competitive advantage in the construction industry. The emergence of knowledge management in this capacity poses enormous challenges to executives of construction firms. This paper proposes a model for benchmarking the knowledge management performance of construction firms that can guide and assist construction business executives in meeting these challenges. The proposed model incorporates benchmarking and knowledge management concepts with fuzzy set theory to adequately handle imprecision, vagueness, and uncertainty that prevail in this process. It uses the fuzzy-weighted average (FWA) algorithm to evaluate the knowledge management performance of construction firms. It is an internal reporting model that can provide powerful diagnostic information to executives of construction firms by evaluating their firm's knowledge management performance, identifying their firm's strengths and weaknesses with regard to each knowledge management practice, and setting priorities for managerial actions related to knowledge management practices that need improvement. A real-world case study is presented to illustrate the implementation and utility of the proposed model.Article Citation - WoS: 18Citation - Scopus: 21Experimental and Numerical Investigation of Forced Convection in a Double Skin Façade(MDPI Multidisciplinary Digital Publishing Institute, 2017) İnan, Tuğba; Başaran, Tahsin; Erek, AytunçFlow and heat transfer of the air cavity between two glass façades designed in the box window type of double skin façade (DSF) was evaluated in a test room which was set up for measurements in the laboratory environment and analyzed under different working conditions by using a computational fluid dynamics tool. Using data from the experimental studies, the verification of the numerical studies was conducted and the air flow and heat transfer in the cavity between the two glass façades were examined numerically in detail. The depth to height of the cavity, the aspect ratio, was changed between 0.10 and 0.16, and was studied for three different flow velocities. Reynolds and average Nusselt numbers ranging from 28,000 to 56,500 and 134 to 272, respectively, were calculated and a non-dimensional correlation between Reynolds and Nusselt numbers was constructed to evaluate the heat transfer from the cavity (except inlet and outlet sections) air to the inside environment and it could be used the box window type of DSF applications having relatively short cavities.Article Citation - WoS: 13Citation - Scopus: 25A Diagnostic Model for Assessing the Knowledge Management Practices of Construction Firms(Korean Society of Civil Engineers, 2012) Kale, Serdar; Karaman, Erkan A.Knowledge management is rapidly becoming a key organizational capability for creating competitive advantage in the construction industry. The emergence of knowledge management as a key organizational capability for creating competitive advantage poses enormous challenges to executives of construction firms. This paper proposes a model for benchmarking the knowledge management practices of construction firms that can guide and assist construction business executives to meet these challenges. The proposed model incorporates benchmarking and knowledge management concepts with Importance-Performance Analysis (IPA) and Comparative Performance Analysis (CPA) maps. The IPA and CPA maps are visual management tools that have been commonly used for continuous improvements in processes and the performance of firms. Yet they have not been used in the construction management literature or for evaluating the knowledge management practices. The proposed model can be used by construction firms as an internal performance measurement tool to evaluate their knowledge management practices. It can provide powerful diagnostic information to construction business executives of construction firms in order to evaluate their firm's knowledge management practices, identify their firm's comparative advantages and disadvantages with regard to each knowledge management practice, and set priorities for managerial actions related to knowledge management practices that need improvement. A real-world case study was conducted by administering a survey to 105 construction firms operating in Turkey and is presented to illustrate the implementation and utility of the proposed model.