Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
5 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 4Polarity Induced Vapochromism and Vapoluminescence of Polythiophene Derivatives for Volatile Organic Compounds Classification(Elsevier, 2023) Karabacak, Soner; Qun, David Lee Chao; Ammanath, Gopal; Yeasmin, Sanjida; Yağmurcukardeş, Mehmet; Palaniappan, Alagappan; Liedberg, Bo; Yıldız, Ümit HakanPolarity induced vapochromic and vapoluminescent properties of cationic poly-3-alkoxythiophene derivatives (PT) casted on polyvinylidene fluoride (PVDF) membranes are reported. PT with six different pendant groups are designed to differentially interact with volatile organic compounds (VOC) of varying polarities, thereby enabling their classification. PT exhibit a rapid vapochromic response with a concurrent modulation of vapoluminescence due to the non-covalent cation-? interactions between the pendant groups and the PT backbone. Adsorption of VOC on pendant groups alters the conformation of PT backbone, thus resulting in an increase in intensity and blue shifting of fluorescence emission within the visible spectrum. The vapoluminescent responses are found to be more sensitive with a limit of detection (LOD) of ?7 ppm and a wider dynamic range as compared to the vapochromic responses with a LOD of ?60 ppm for the detection of a model VOC: chloroform. Notably, all the PT illustrate an instantaneous recovery of colour and luminescence upon desorption of VOC. PT interaction with VOC of varying polarities was ascertained using density functional theory (DFT) and principal component analysis (PCA) methodologies. In summary, the polarity induced vapochromic and vapoluminescent properties of PT could yield a selective and sensitive vapochromic and fluorometric dual-mode VOC detection platform. © 2023Article Citation - WoS: 1Citation - Scopus: 1A Multi-Layered Graphene Based Gas Sensor Platform for Discrimination of Volatile Organic Compounds Via Differential Intercalation(Royal Society of Chemistry, 2023) Özkendir İnanç, Dilce; Ng, Zhi Kai; Başkurt, Mehmet; Keleş, Berfin; Vardar, Gökay; Şahin, Hasan; Tsang, Siu Hon; Palaniappan, Alagappan; Yıldız, Ümit Hakan; Teo, EhtSelective and sensitive detection of volatile organic compounds (VOCs) is of critical importance for environmental monitoring, disease diagnosis and industrial applications. Among VOCs, assay development for primary alcohols has captured significant research attention since their toxicity causes adverse effects on gastrointestinal and central nerve systems, resulting in irreversible blindness, and coma, and can be even fatal at high exposure levels. However, selective detection of primary alcohols is extremely challenging owing to the similarity in their molecular structure and characteristic groups. Herein, we have attempted to investigate the differential methanol (MeOH)-ethanol (EtOH) discriminative properties of single-layer, bi-layer, and multi-layer graphene morphologies. Chemiresistors fabricated using the three morphologies of graphene illustrate discriminative MeOH-EtOH responses, which is attributed to the phenomenon of differential intercalation of MeOH within layered graphene morphologies as compared to that of EtOH. This hypothesis is verified by density functional theory calculations, which revealed that the adsorption of EtOH molecules on the graphene surface is more energetically favorable as compared to that of MeOH molecules, thereby inhibiting their intercalation within the layered graphene morphologies. It is further evaluated that the degree of MeOH intercalation increases with increasing layers of graphene for obtaining differential MeOH-EtOH responses. Experimental results suggest possibilities to develop selective and sensitive MeOH assays fabricated using various graphene morphologies in a combinatorial sensor array format.Article Citation - WoS: 27Citation - Scopus: 28Biocomposite Scaffolds for 3d Cell Culture: Propolis Enriched Polyvinyl Alcohol Nanofibers Favoring Cell Adhesion(John Wiley and Sons Inc., 2021) Bilginer, Rumeysa; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuThe objective of this work is generation of propolis/polyvinyl alcohol (PVA) scaffold by electrospinning for 3D cell culture. Here, PVA used as co-spinning agent since propolis alone cannot be easily processed by electrospinning methodology. Propolis takes charge in maximizing biological aspect of scaffold to facilitate cell attachment and proliferation. Morphological analysis showed size of the electrospun nanofibers varied between 172-523 nm and 345-687 nm in diameter, for non-crosslinked and crosslinked scaffolds, respectively. Incorporation of propolis resulted in desired surface properties of hybrid matrix, where hybrid scaffolds highly favored protein adsorption. To examine cell compatibility, NIH-3T3 and HeLa cells were seeded on propolis/PVA hybrid scaffold. Results confirmed that integration of propolis supported cell adhesion and cell proliferation. Also, results indicated electrospun propolis/PVA hybrid scaffold provide suitable microenvironment for cell culturing. Therefore, developed hybrid scaffold could be considered as potential candidate for 3D cell culture and tissue engineering.Article Citation - WoS: 5Citation - Scopus: 6Boosting Up Printability of Biomacromolecule Based Bio-Ink by Modulation of Hydrogen Bonding Pairs(Elsevier Ltd., 2020) Köksal, Büşra; Önbaş, Rabia; Başkurt, Mehmet; Şahin, Hasan; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes low dose UV curable and bioprintable new bioink made of hydrogen bond donor-acceptor adaptor molecule 2-isocyanatoethyl methacrylate (NCO)modified gelatin (NCO-Gel). Our theoretical calculations demonstrate that insertion of 2-isocyanatoethyl methacrylate doubles the interaction energy (500 meV) between gelatin chains providing significant contribution in interchain condensation and self-organization as compared to methacrylic anhydride modified gelatin (GelMA). The NCO-Gel exhibits peak around 1720 cm?1 referring to bidentate hydrogen bonding between H-NCO and its counterpart O[dbnd]CN[sbnd]H. These strong interchain interactions drive chains to be packed and thereby facilitating UV crosslinking. The NCO-Gel is exhibiting a rapid, 10 s gelation process by the exposure of laser (3 W, 365 nm). The dynamic light scattering characterization also reveals that NCO-Gel has faster sol to gel transition as compared to GelMA depending on the UV curing time. The NCO-Gel was found to be more firm and mechanically strong that provides advantages in molding as well as bioprinting processes. Bioprinted NCO-Gel has shown sharp borders and stable 3D geometry as compared to GelMA ink under 10 s UV curing time. The cell viability tests confirm that NCO-Gel facilitates cell proliferation and supports cell viability. We foresee that NCO-Gel bioink formulation provides a promising opportunity when low dose UV curing and rapid printing are required. © 2020 Elsevier LtdArticle Citation - WoS: 3Citation - Scopus: 4Lipid Bilayer on Wrinkled-Interfaced Graphene Field Effect Transistor(Elsevier Ltd., 2021) Özkendir İnanç, Dilce; Çelebi, Cem; Yıldız, Ümit HakanThis study describes lipid bilayer-based sensor interface on SiO2 encapsulated graphene field effect transistors (GFET). The SiO2 layer was utilized as a lipid compatible surface that drives bilayer formation. The two types of surface morphologies i) wrinkled morphology by thermal evaporation (TE) and ii) flat morphology by pulsed electron deposition (PED) were obtained. The sensing performance of wrinkled and flat interfaced-GFETs were investigated, pH sensitivity of wrinkled interfaced-GFETs were found to be ten fold larger than the flat ones. The enhanced sensitivity is attributed to thinning of the oxide layer by formation of wrinkles thereby facilitating electrostatic gating on graphene. We foresee that described wrinkled SiO2 interfaced-GFET holds promise as a cell membrane mimicking sensing platform for novel bioelectronic applications. © 2020