Photonics / Fotonik

Permanent URI for this collectionhttps://hdl.handle.net/11147/2590

Browse

Search Results

Now showing 1 - 10 of 38
  • Article
    Anisotropic Tunability of Vibrational Modes in Black Phosphorus Under Uniaxial Compressive/Tensile Strain
    (Wiley, 2023) Li, Hao; Kutlu, Tayfun; Carrascoso, Felix; Şahin, Hasan; Munuera, Carmen; Castellanos Gomez, Andres
    Strain engineering is a powerful strategy for tuning the optical, electrical, vibrational properties of 2D nanomaterials. In this work, a four-point bending apparatus is constructed to apply both compressive and tensile strain on 2D anisotropic black phosphorus flake. Further polarized Raman spectroscopy is used to study the vibrational modes of black phosphorus flakes under uniaxial strain applied along various crystalline orientations. Here, a strong anisotropic blue/redshift of A1g, B2g, and A2g modes is found under compressive/tensile strain, respectively. Interestingly, mode A1g exhibits the maximum/minimum shift while mode B2g and mode A2g present the minimum/maximum shift when the strain is applied along armchair/zigzag direction. Density functional theory calculations are carried out to investigate the anisotropic strain response mechanism, finding that the strain-induced regulation of the PP bond angle, bond length, and especially interlayer interaction has a giant influence on the Raman shift. A four-point bending apparatus is constructed to study the effect of uniaxial strain on the vibrational property of anisotropic black phosphorus. Particularly, strong anisotropy on the Raman blueshift/redshift rate upon compressive/tensile strain can be observed, which results from the strain-induced regulation of the bond angle, bond length, and interlayer interactions according to density functional theory calculation analysis.image
  • Article
    Citation - WoS: 5
    Citation - Scopus: 4
    Electromagnetically Induced Transparency and Absorption Cross-Over With a Four-Level Rydberg System
    (IOP Publishing, 2022) Oyun, Yağız; Çakır, Özgür; Sevinçli, Sevilay
    Electromagnetically induced transparency (EIT) and absorption (EIA) are quantum coherence phenomena which result from the interference of excitation pathways. Combining these with Rydberg atoms have opened up many possibilities for various applications. We introduce a theoretical model to study Rydberg-EIT and Rydberg-EIA effects in cold Cs and Rb atomic ensembles in a four-level ladder type scheme taking into account van der Waals type interactions between the atoms. The proposed many-body method for analysis of such systems involves a self-consistent mean field approach and it produces results which display a very good agreement with recent experiments. Our calculations also successfully demonstrate experimentally observed EIT-EIA cross-over in the Rb case. Being able to simulate the interaction effects in such systems has significant importance, especially for controlling the optical response of these.
  • Article
    Single Layer Res2h2: Stability, Raman Activity and Electronic Properties
    (Eskişehir Teknik Üniversitesi, 2018) Ünsal, Elif; Şahin, Hasan
    In this study, the structural, vibrational and electronic properties of the hydrogenated single layer of ReS2 are investigated byperforming the first principle calculations based on density functional theory. We found that the characteristic properties ofthe monolayer ReS2 can be manipulated upon the hydrogen functionalization. As the monolayer ReS2, the ReS2H2 hasdistorted 1T phase; however, the bonding in Re slab significantly varies with the hydrogenation. Our results demonstrate thatthe full-surface hydrogenation leads to an expansion in lattice and the Re4 tetramer-chains in the monolayer ReS2 areseparated into two dimers in the hydrogenated monolayer. It is calculated that the dynamically stable monolayer of ReS2H2has 26 Raman-active vibrational modes. Constant volume specific heat calculations are also performed and the resultsindicate that at high temperature, the monolayer ReS2 approaches to limit of 3R before the monolayer ReS2H2. By performingthe electronic band structure calculations, it is shown that when the ReS2 surface is fully hydrogenated, there occurs a directto indirect band gap transition and the semiconducting hydrogen-induced monolayer has a band gap of 0.74 eV.
  • Article
    Citation - WoS: 12
    Citation - Scopus: 14
    Laser Assisted Synthesis of Anisotropic Metal Nanocrystals and Strong Light-Matter Coupling in Decahedral Bimetallic Nanocrystals
    (Royal Society of Chemistry, 2021) Mert Balcı, Fadime; Sarısözen, Sema; Polat, Nahit; Güvenç, Çetin Meriç; Karadeniz, Uğur; Tertemiz, Necip Ayhan; Balcı, Sinan
    The advances in colloid chemistry and nanofabrication allowed us to synthesize noble monometallic and bimetallic nanocrystals with tunable optical properties in the visible and near infrared region of the electromagnetic spectrum. In the strong coupling regime, surface plasmon polaritons (SPPs) of metal nanoparticles interact with excitons of quantum dots or organic dyes and plasmon-exciton hybrid states called plexcitons are formed. Until now, various shaped metal nanoparticles such as nanorods, core-shell nanoparticles, hollow nanoparticles, nanoprisms, nanodisks, nanorings, and nanobipyramids have been synthesized to generate plasmon-exciton mixed states. However, in order to boost plasmon-exciton interaction at nanoscale dimensions and expand the application of plexcitonic nanocrystals in a variety of fields such as solar cells, light emitting diodes, and nanolasers, new plexcitonic nanocrystals with outstanding optical and chemical properties remain a key goal and challenge. Here we report laser-assisted synthesis of decahedral shaped noble metal nanocrystals, tuning optical properties of the decahedral shaped nanocrystals by galvanic replacement reactions, colloidal synthesis of bimetallic decahedral shaped plexcitonic nanocrystals, and strong plasmon-plasmon interaction in bimetallic decahedral shaped noble metal nanocrystals near a metal film. We photochemically synthesize decahedral Ag nanoparticles from spherical silver nanoparticles by using a 488 nm laser. The laser assisted synthesis of silver nanoparticles yields decahedral (bicolored) and prism (monocolored) shaped silver nanocrystals. The decahedral shaped nanoparticles were selectively separated from prism shaped nanoparticles by centrifugation. The optical properties of decahedral nanocrystals were tuned by the galvanic replacement reaction between gold ions and silver atoms. Excitons of J-aggregate dyes and SPPs of decahedral bimetallic nanoparticles strongly couple and hence decahedral shaped plexcitonic nanoparticles are prepared. In addition, localized SPPs of decahedral shaped bimetallic nanocrystals interact strongly with the propagating SPPs of a flat silver film and hence new hybrid plasmonic modes (plasmonic nanocavities) are generated. The experimental results are further fully corroborated by theoretical calculations including decahedral shaped plexcitonic nanoparticles and decahedral nanoparticles coupled to flat metal films.
  • Article
    Citation - WoS: 20
    Citation - Scopus: 23
    Kagome-Like Silicene: a Novel Exotic Form of Two-Dimensional Epitaxial Silicon
    (Elsevier, 2020) Sassa, Yasmine; Johansson, Fredrik O. L.; Lindblad, Andreas; Yazdi, Milad G.; Simonov, Konstantin; Weissenrieder, Jonas; Le Lay, Guy; İyikanat, Fadıl; Şahin, Hasan
    Since the discovery of graphene, intensive efforts have been made in search of novel two-dimensional (2D) materials. Decreasing the materials dimensionality to their ultimate thinness is a promising route to unveil new physical phenomena, and potentially improve the performance of devices. Among recent 2D materials, analogs of graphene, the group IV elements have attracted much attention for their unexpected and tunable physical properties. Depending on the growth conditions and substrates, several structures of silicene, germanene, and stanene can be formed. Here, we report the synthesis of a Kagome-like lattice of silicene on aluminum (1 1 1) substrates. We provide evidence of such an exotic 2D Si allotrope through scanning tunneling microscopy (STM) observations, high-resolution core-level (CL) and angle-resolved photoelectron spectroscopy (ARPES) measurements, along with Density Functional Theory calculations.
  • Article
    Citation - WoS: 24
    Citation - Scopus: 24
    Defect Tolerant and Dimension Dependent Ferromagnetism in Mnse2
    (Royal Society of Chemistry, 2019) Eren, İsmail; İyikanat, Fadıl; Şahin, Hasan
    By performing density functional theory-based calculations, we investigate the structural, vibrational, electronic and magnetic properties of 2D monolayers, nanoribbons and quantum dots of MnSe2. Vibrational spectrum analysis reveals the dynamical stability of not only ferromagnetic but also antiferromagnetic phases of single layer MnSe2 crystal structures. Electronically, calculations show that 1T-MnSe2 is a ferromagnetic structure displaying metallic behavior. It is also found that the structure preserves its dynamical stability and metallic behavior even under the presence of high density Se vacancies. Moreover, it was predicted that, differing from the 2D MnSe2, metal-metal interaction driven reconstructions result in ferromagnetic-to-antiferromagnetic crossover in the ground state of nanoribbons and quantum dots. With its robust ferromagnetic metallic character in the 2D ultra-thin limit and dimension-dependent magnetic properties, MnSe2 is an important candidate for spintronic device applications.
  • Article
    Citation - WoS: 30
    Citation - Scopus: 29
    Stacking-Dependent Excitonic Properties of Bilayer Blue Phosphorene
    (American Physical Society, 2019) İyikanat, Fadıl; Torun, Engin; Senger, Ramazan Tuğrul; Şahin, Hasan
    Ab initio calculations in the framework of many-body perturbation theory (MBPT) are performed to calculate the electronic and optical properties of monolayer and bilayer blue phosphorene with different stacking configurations. It is found that the stacking configuration of bilayer blue phosphorene strongly affects the electronic band gap of the material. By solving the Bethe-Salpeter equation (BSE) on top of the G(0)W(0) calculation, the binding energies, spectral positions, and band decomposition of excitons of monolayer and bilayer configurations are investigated. The most prominent two excitonic peaks of bilayers are examined in detail. Our calculations show that different stacking configurations lead to distinct interlayer interaction characteristics which lead to substantial change in the optical spectrum of bilayer blue phosphorene. Mostly intralayer and mixed interlayer excitons with quite high binding energies are obtained in bilayer blue phosphorene. Our results show that excitonic properties of ultrathin materials play an important role in tuning and improving the optoelectronic performance of two-dimensional materials.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 3
    Hydrogenated Derivatives of Hexacoordinated Metallic Cu2si Monolayer
    (Royal Society of Chemistry, 2018) Ünsal, Elif; İyikanat, Fadıl; Şahin, Hasan; Senger, Ramazan Tuğrul
    Herein, we carried out first-principles calculations based on density functional theory to investigate the effects of surface functionalization with hydrogen atoms on structural, dynamical and electronic properties of Cu2Si monolayer. Pristine Cu2Si, a metallic monolayer, has a planar hexacoordinate structure. Calculations revealed that the most favorable position of a single H atom on the Cu2Si monolayer is at the top of a Si site. Derivatives of Cu2Si monolayer with various H concentrations were investigated, and by performing phonon calculations, it was found that there are three stable hydrogenated structures. Specific heat of these monolayers was found to increase with the hydrogen concentration at temperatures higher than 100 K. Electronically, the hydrogenated derivatives of Cu2Si monolayer preserve the metallic character.
  • Article
    Citation - WoS: 36
    Citation - Scopus: 34
    Raman Fingerprint of Stacking Order in Hfs2-Ca(oh)(2) Heterobilayer
    (American Physical Society, 2019) Yağmurcukardeş, Mehmet; Özen, Sercan; İyikanat, Fadıl; Peeters, François M.; Şahin, Hasan
    Using density functional theory-based first-principles calculations, we investigate the stacking order dependence of the electronic and vibrational properties of HfS2-Ca(OH)(2) heterobilayer structures. It is shown that while the different stacking types exhibit similar electronic and optical properties, they are distinguishable from each other in terms of their vibrational properties. Our findings on the vibrational properties are the following: (i) from the interlayer shear (SM) and layer breathing (LBM) modes we are able to deduce the AB' stacking order, (ii) in addition, the AB' stacking type can also be identified via the phonon softening of E-g(I) and A(g)(III) modes which harden in the other two stacking types, and (iii) importantly, the ultrahigh frequency regime possesses distinctive properties from which we can distinguish between all stacking types. Moreover, the differences in optical and vibrational properties of various stacking types are driven by two physical effects, induced biaxial strain on the layers and the layer-layer interaction. Our results reveal that with both the phonon frequencies and corresponding activities, the Raman spectrum possesses distinctive properties for monitoring the stacking type in novel vertical heterostructures constructed by alkaline-earth-metal hydroxides.
  • Article
    Citation - WoS: 15
    Citation - Scopus: 15
    Vertical van der waals heterostructure of single layer InSe and SiGe
    (American Chemical Society, 2019) Eren, İsmail; Özen, Sercan; Sözen, Yiğit; Yağmurcukardeş, Mehmet; Şahin, Hasan
    We present a first-principles investigation on the stability, electronic structure, and mechanical response of ultrathin heterostructures composed of single layers of InSe and SiGe. First, by performing total energy optimization and phonon calculations, we show that single layers of InSe and SiGe can form dynamically stable heterostructures in 12 different stacking types. Valence and conduction band edges of the heterobilayers form a type-I heterojunction having a tiny band gap ranging between 0.09 and 0.48 eV. Calculations on elastic-stiffness tensor reveal that two mechanically soft single layers form a heterostructure which is stiffer than the constituent layers because of relatively strong interlayer interaction. Moreover, phonon analysis shows that the bilayer heterostructure has highly Raman active modes at 205.3 and 43.7 cm(-1), stemming from the out-of-plane interlayer mode and layer breathing mode, respectively. Our results show that, as a stable type-I heterojunction, ultrathin heterobilayer of InSe/SiGe holds promise for nanoscale device applications.