Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
11 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 9Cesium Manganese Chloride: Stable Lead-Free Perovskite From Bulk To Single Layer(Elsevier, 2021) Sözen, Yiğit; Özen, Sercan; Şahin, HasanMotivated by the recent advances in perovskite-based solar cells, here we investigate stability, electronic properties and vibrational characteristics of lead-free perovskite, CsMnCl3, and its low dimensional forms by means of first-principles calculations. Structural optimizations reveal that, regardless of whether it is bulk or ultra-thin single layer cubic perovskite structure, CsMnCl3 crystal exhibit robust antiferromagnetism in its ground state due to oppositely aligned magnetic moments of Mn atoms. In addition to total energy calculations, phonon band dispersions indicate that CsMnCl3 structure sustains its dynamical stability down to its thinnest single layer crystal structures. The calculated Raman spectrums state that while the first-order Raman scattering is forbidden for bulk CsMnCl3 due to the cubic symmetry; dimensional-reduction-driven symmetry breaking leads to emergence of experimentally-observable distinctive Raman active modes in bilayer and single-layer crystal structures. Moreover, the electronic band dispersions reveal that from its bulk to ultra-thin single layer structures CsMnCl3 crystals are robust antiferromagnetic insulators. Multiple valid features like controllable dimensionality, robust antiferromagnetism and wide electronic band gap make cubic CsMnCl3 crystal as a potential candidate for nano-scale optoelectronic applications.Article Citation - WoS: 3Citation - Scopus: 4Experimental and First-Principles Investigation of Cr-Driven Color Change in Cesium Lead Halide Perovskites(American Institute of Physics, 2019) Özen, Sercan; Güner, Tuğrul; Topçu, Gökhan; Özcan, Mehmet; Demir, Mustafa Muammer; Şahin, HasanHerein, we report room temperature Cr-doping for all-inorganic perovskites that have attracted great attention in recent years due to their extraordinary optical properties, low cost, and ease of synthesis. Incorporation of Cr 3 + ions into the perovskite crystal lattices is achieved by following a facile route involving an antisolvent recrystallization method at room temperature. It is shown that both Cr-doping and formation of crystals in the CsPbBr x Cl 3 - x phase are provided by increasing the concentration of the CrCl 3 solution. It is also observed that the doping procedure leads to the emergence of three types of distinctive peaks in the PL spectrum originating from CsPbBr x Cl 3 - x domains (476-427nm), Cr-strained host lattices (515nm), and midgap states formed by Cr dopants (675-775nm). It is also found that the Cr-doped perovskites emitting a dark violaceous color change their color to white with a high color rendering index (88) in 30-day time intervals. Easy-tunable optical properties of all-inorganic Cs perovskites indicate their great potential for future optoelectronic device applications.Article Citation - WoS: 4Citation - Scopus: 4Color-Tunable All-Inorganic Cspbbr3 Perovskites Nanoplatelet Films for Photovoltaic Devices(American Chemical Society, 2019) Özcan, Mehmet; Özen, Sercan; Topçu, Gökhan; Demir, Mustafa Muammer; Şahin, HasanHerein, we demonstrate a novel coating approach to fabricate CsPbBr3 perovskite nanoplatelet film with heat-free process via electrospraying from precursor solution. A detailed study is carried out to determine the effect of various parameters such as ligand concentration, electric field, flow rate, etc. on the optical properties. By controlling the volume ratios of the oleylamine (OAm) and oleic acid (OA), the coalescing and thickness of the resulting nanoplatelets can be readily tuned that results in control over emission in the range of 100 nm without any antisolvent crystallization or heating processes. The varying electrical field and flow rate was found as inefficient on the emission characteristics of the films. In addition, the crystal films were obtained under ambient conditions on the ITO coated glass surfaces as in the desired pattern. As a result, we demonstrated a facile and reproducible way of synthesizing and coating of CsPbBr3 perovskite nanoplatelets which is suitable for large-scale production. In this method, the ability of tuning the degree of quantum confinement for perovskite nanoplatelets is promising approach for the one-step fabrication of crystal films that may enable the use in optoelectronics.Article Citation - WoS: 234Citation - Scopus: 234Quantum Properties and Applications of 2d Janus Crystals and Their Superlattices(American Institute of Physics, 2020) Yağmurcukardeş, Mehmet; Qin, Y.; Özen, Sercan; Sayyad, M.; Peeters, François M.; Tongay, S.; Şahin, HasanTwo-dimensional (2D) Janus materials are a new class of materials with unique physical, chemical, and quantum properties. The name "Janus" originates from the ancient Roman god which has two faces, one looking to the future while the other facing the past. Janus has been used to describe special types of materials which have two faces at the nanoscale. This unique atomic arrangement has been shown to present rather exotic properties with applications in biology, chemistry, energy conversion, and quantum sciences. This review article aims to offer a comprehensive review of the emergent quantum properties of Janus materials. The review starts by introducing 0D Janus nanoparticles and 1D Janus nanotubes, and highlights their difference from classical ones. The design principles, synthesis, and the properties of graphene-based and chalcogenide-based Janus layers are then discussed. A particular emphasis is given to colossal built-in potential in 2D Janus layers and resulting quantum phenomena such as Rashba splitting, skyrmionics, excitonics, and 2D magnetic ordering. More recent theoretical predictions are discussed in 2D Janus superlattices when Janus layers are stacked onto each other. Finally, we discuss the tunable quantum properties and newly predicted 2D Janus layers waiting to be experimentally realized. The review serves as a complete summary of the 2D Janus library and predicted quantum properties in 2D Janus layers and their superlattices.Article Citation - WoS: 1Citation - Scopus: 1Structural, Electronic and Vibrational Properties of Ultra-Thin Octahedrally Coordinated Structure of Euo2(Elsevier, 2020) Özcan, Mehmet; Özen, Sercan; Yağmurcukardeş, Mehmet; Şahin, HasanNovel stable ultra-thin phases of europium oxide are investigated by means of state-of-the-art first principles calculations. Total energy calculations show that single layers of EuO2 and Eu(OH)(2) can be stabilized in an octahedrally coordinated (1T) atomic structure. However, phonon calculations reveal that although both structures are energetically feasible, only the 1T-EuO2 phase has dynamical stability. The phonon spectrum of 1T-EuO2 displays three Raman active modes; a non-degenerate out-of-plane A(1g) mode at 353.5 cm(-1) and two doubly-degenerate in-plane E-g modes at 304.3 cm(-1). Furthermore, magnetic ground state and electronic band dispersion calculations show that the single layer EuO2 is a metal with net magnetic moment of 5(mu B) per unitcell resulting in a half-metallic ferrimagnetic behavior. Moreover, robustness of the half-metallic ferrimagnetic characteristics of EuO2 is confirmed by the application of electric field and charging. Single layer 1T-EuO2, with its stable ultra-thin structure and half-metallic ferrimagnetic feature, is a promising novel material for nanoscale electronic and spintronic applications.Article Citation - WoS: 36Citation - Scopus: 34Raman Fingerprint of Stacking Order in Hfs2-Ca(oh)(2) Heterobilayer(American Physical Society, 2019) Yağmurcukardeş, Mehmet; Özen, Sercan; İyikanat, Fadıl; Peeters, François M.; Şahin, HasanUsing density functional theory-based first-principles calculations, we investigate the stacking order dependence of the electronic and vibrational properties of HfS2-Ca(OH)(2) heterobilayer structures. It is shown that while the different stacking types exhibit similar electronic and optical properties, they are distinguishable from each other in terms of their vibrational properties. Our findings on the vibrational properties are the following: (i) from the interlayer shear (SM) and layer breathing (LBM) modes we are able to deduce the AB' stacking order, (ii) in addition, the AB' stacking type can also be identified via the phonon softening of E-g(I) and A(g)(III) modes which harden in the other two stacking types, and (iii) importantly, the ultrahigh frequency regime possesses distinctive properties from which we can distinguish between all stacking types. Moreover, the differences in optical and vibrational properties of various stacking types are driven by two physical effects, induced biaxial strain on the layers and the layer-layer interaction. Our results reveal that with both the phonon frequencies and corresponding activities, the Raman spectrum possesses distinctive properties for monitoring the stacking type in novel vertical heterostructures constructed by alkaline-earth-metal hydroxides.Article Citation - WoS: 72Citation - Scopus: 77Gd3+-Doped Alpha-Cspbi3 Nanocrystals With Better Phase Stability and Optical Properties(American Chemical Society, 2019) Güvenç, Çetin Meriç; Yalçınkaya, Yenal; Özen, Sercan; Şahin, Hasan; Demir, Mustafa MuammerBlack alpha-CsPbI3 perovskites are unable to maintain their phase stability under room conditions; hence, the alpha-CsPbI3 phase transforms into a thermodynamically stable yellow delta-CsPbI3 phase within a few days, which has a nonperovskite structure and high band gap for optoelectronic applications. This phase transformation should be prevented or at least retarded to make use of superior properties of alpha-CsPbI3 in optoelectronic applications. In this study, Gd3+ doping was employed with the aim of increasing the stability of alpha-CsPbI3. All doped alpha-CsPbI3 nanocrystals with various levels of Gd3+, between 5 and 15 mol %, have shown greater phase stability than that of the pure alpha-CsPbI3 phase from 5 days up to 11 days under ambient conditions. This prolonged phase stability can be attributed to three potential reasons: increased tolerance factor of the perovskite structure, distorted cubic symmetry, and decreased defect density in nanocrystals. Urbach energy values suggest the reduction of defect density in the doped nanocrystals. Also, use of 10 mol % Gd3+ as a dopant material increases the photoluminescence quantum yield from 70 to 80% and fluorescence lifetime of alpha-CsPbI3 from 47.4 to 64.4 ns. Further, density functional theory calculations are in a good agreement with the experimental results.Article Citation - WoS: 15Citation - Scopus: 15Vertical van der waals heterostructure of single layer InSe and SiGe(American Chemical Society, 2019) Eren, İsmail; Özen, Sercan; Sözen, Yiğit; Yağmurcukardeş, Mehmet; Şahin, HasanWe present a first-principles investigation on the stability, electronic structure, and mechanical response of ultrathin heterostructures composed of single layers of InSe and SiGe. First, by performing total energy optimization and phonon calculations, we show that single layers of InSe and SiGe can form dynamically stable heterostructures in 12 different stacking types. Valence and conduction band edges of the heterobilayers form a type-I heterojunction having a tiny band gap ranging between 0.09 and 0.48 eV. Calculations on elastic-stiffness tensor reveal that two mechanically soft single layers form a heterostructure which is stiffer than the constituent layers because of relatively strong interlayer interaction. Moreover, phonon analysis shows that the bilayer heterostructure has highly Raman active modes at 205.3 and 43.7 cm(-1), stemming from the out-of-plane interlayer mode and layer breathing mode, respectively. Our results show that, as a stable type-I heterojunction, ultrathin heterobilayer of InSe/SiGe holds promise for nanoscale device applications.Article Citation - WoS: 10Citation - Scopus: 12The Effect of Dopa Hydroxyl Groups on Wet Adhesion To Polystyrene Surface: an Experimental and Theoretical Study(Elsevier, 2020) Yıldız, Remziye; Özen, Sercan; Şahin, Hasan; Akdoğan, YaşarMussels wet adhesive performance has been arousing curiosity for a long time. It is found that 3,4-dihydroxyphenylalanine (DOPA) is responsible for adhesive properties of mussels. Despite a large body of research characterizing the interactions DOPA with hydrophilic surfaces, relatively few works have addressed the mechanism of interactions with hydrophobic surfaces. The benzene ring of DOPA is the main attributor to the adhesion on hydrophobic polystyrene (PS) surface. However, here we showed that two hydroxyl groups of catechol have also effects on wet adhesion. We studied wet adhesive properties of DOPA, tyrosine and phenylalanine functionalized PEG polymers, PEG-(N-Boc-L-DOPA)(4), PEG-(N-Boc-L-Tyrosine)(4), PEG-(N-Boc-L-Phenylalanine)(4), on spin labeled PS nanobeads (SL-PS) by electron paramagnetic resonance (EPR) spectroscopy. Surface coverage ratio of SL-PS upon additions of PEG-(N-Boc-L-DOPA)(4), PEG-(N-Boc-L-Tyrosine)(4) and PEG-(N-Boc-L-Phenylalanine)(4) showed that SL-PS was covered with 70%, 50% and 0%, respectively. This showed that spontaneous wet adhesion on PS increases with the number of amino acids hydroxyl groups. This is also supported with the density functional theory (DFT) energy calculations and ab-initio molecular dynamics (AIMD) simulations. In water, interactions between water molecules and hydroxyl groups on the catechol induce catechol adhesion via 7C-7C stacking between the catechol and double styrene rings which were already tilted out with water.Article Citation - WoS: 1Interaction of Ge With Single Layer Gaas: From Ge-Island Nucleation To Formation of Novel Stable Monolayers(Elsevier, 2020) Sözen, Yiğit; Eren, İsmail; Özen, Sercan; Yağmurcukardeş, Mehmet; Şahin, HasanIn this study, reactivity of single-layer GaAs against Ge atoms is studied by means of ab initio density functional theory calculations. Firstly, it is shown that Ge atoms interact quite strongly with the GaAs layer which allows the formation of Ge islands while it hinders the growth of detached germanene monolayers. It is also predicted that adsorption of Ge atoms on GaAs single-layer lead to formation of two novel stable single-layer crystal structures, namely 1H-GaGeAs and 1H(A)-GaGeAs. Both the total energy optimizations and the calculated vibrational spectra indicate the dynamical stability of both single layer structures. Moreover, although both structures crystallize in 1H phase, 1H-GaGeAs and 1H(A)-GaGeAs exhibit distinctive vibrational features in their Raman spectra which is quite important for distinguishing the structures. In contrast to the semiconducting nature of single-layer GaAs, both polytypes of GaGeAs exhibit metallic behavior confirmed by the electronic band dispersions. Furthermore, the linear-elastic constants, in-plane stiffness and Poisson ratio, reveal the ultrasoft nature of the GaAs and GaGeAs structures and the rigidity of GaAs is found to be slightly enhanced via Ge adsorption. With their stable, ultra-thin and metallic properties, predicted single-layer GaGeAs structures can be promising candidates for nanoscale electronic and mechanical applications.