Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
6 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1A Multi-Layered Graphene Based Gas Sensor Platform for Discrimination of Volatile Organic Compounds Via Differential Intercalation(Royal Society of Chemistry, 2023) Özkendir İnanç, Dilce; Ng, Zhi Kai; Başkurt, Mehmet; Keleş, Berfin; Vardar, Gökay; Şahin, Hasan; Tsang, Siu Hon; Palaniappan, Alagappan; Yıldız, Ümit Hakan; Teo, EhtSelective and sensitive detection of volatile organic compounds (VOCs) is of critical importance for environmental monitoring, disease diagnosis and industrial applications. Among VOCs, assay development for primary alcohols has captured significant research attention since their toxicity causes adverse effects on gastrointestinal and central nerve systems, resulting in irreversible blindness, and coma, and can be even fatal at high exposure levels. However, selective detection of primary alcohols is extremely challenging owing to the similarity in their molecular structure and characteristic groups. Herein, we have attempted to investigate the differential methanol (MeOH)-ethanol (EtOH) discriminative properties of single-layer, bi-layer, and multi-layer graphene morphologies. Chemiresistors fabricated using the three morphologies of graphene illustrate discriminative MeOH-EtOH responses, which is attributed to the phenomenon of differential intercalation of MeOH within layered graphene morphologies as compared to that of EtOH. This hypothesis is verified by density functional theory calculations, which revealed that the adsorption of EtOH molecules on the graphene surface is more energetically favorable as compared to that of MeOH molecules, thereby inhibiting their intercalation within the layered graphene morphologies. It is further evaluated that the degree of MeOH intercalation increases with increasing layers of graphene for obtaining differential MeOH-EtOH responses. Experimental results suggest possibilities to develop selective and sensitive MeOH assays fabricated using various graphene morphologies in a combinatorial sensor array format.Article Citation - WoS: 4Citation - Scopus: 4Identification of a Magnetic Phase Via a Raman Spectrum in Single-Layer Mnse: an Ab Initio Study(Elsevier, 2022) Yayak, Yankı Öncü; Şahin, Hasan; Yağmurcukardeş, MehmetMotivated by the recent experimental realization of single-layer two-dimensional MnSe [ACS Nano2021, 15, 13794-13802], structural, magnetic, elastic, vibrational, and electronic properties of single-layer MnSe are investigated by using density functional theory-based calculations. Among four different magnetic phases, namely, ferromagnetic (FM) and Nẽel-, zigzag-, and stripy-antiferromagnetic (AFM) phases, the Nẽel-AFM structure is found to be the energetically most favorable phase. Structural optimizations show the formation of in-plane anisotropy within the structures of zigzag- and stripy-AFM phases in single-layer MnSe. For the dynamically stable four magnetic phases, predicted Raman spectra reveal that each phase exhibits distinctive vibrational features and can be distinguished from each other. In addition, the elastic constants indicate the mechanical stability of each magnetic phase in single-layer MnSe and reveal the soft nature of each phase. Moreover, electronic band dispersion calculations show the indirect band gap semiconducting nature with varying electronic band gap energies for all magnetic phases. Furthermore, the atomic orbital-based density of states reveals the existence of out-of-plane orbitals dominating the top valence states in zigzag- and stripy-AFM phases, giving rise to the localized states. The stability of different magnetic phases and their distinct vibrational and electronic properties make single-layer MnSe a promising candidate for nanoelectronic and spintronic applications.Article Citation - WoS: 5Citation - Scopus: 6Toward Single-Layer Janus Crystals: Off-Balance Materials From Synthesis To Nanotechnology Applications(American Institute of Physics, 2021) Oğuztürk, H. Esra; Sözen, Yiğit; Akyol, Cansu; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Şahin, HasanThe existence of things is directly related to their structural symmetry in a broad framework ranging from atoms to crystalline materials and from simple cells to complex organisms like humans. However, structural imbalance that occurs through natural or artificial means can provide completely different advantages. Molecules, crystals, and complex structures with structural imbalance constitute the family of Janus-type materials. This perspective provides a comprehensive discussion on the synthesis techniques of Janus-type materials, their use in fields from biology to materials science, and very recent studies on the family of 2D ultrathin graphene-like structures. We believe that, thanks to the advances in experimental techniques, the few-atom-sized off-balanced materials will be indispensable parts of the nanotechnology products that soon will be used in our daily lives.Article Citation - WoS: 1Citation - Scopus: 1First-Principles Investigation of Structural, Raman and Electronic Characteristics of Single Layer Ge3n4(Elsevier, 2022) Yayak, Yankı Öncü; Sözen, Yiğit; Tan, Fırat; Güngen, Deniz; Gao, Q.; Kang, J.; Yağmurcukardeş, Mehmet; Şahin, HasanBy means of density functional theory-based first-principle calculations, the structural, vibrational and electronic properties of single-layer Ge3N4 are investigated. Structural optimizations and phonon band dispersions reveal that single-layer ultrathin form of Ge3N4 possesses a dynamically stable buckled structure with large hexagonal holes. Predicted Raman spectrum of single-layer Ge3N4 indicates that the buckled holey structure of the material exhibits distinctive vibrational features. Electronic band dispersion calculations indicate the indirect band gap semiconducting nature of single-layer Ge3N4. It is also proposed that single-layer Ge3N4 forms type-II vertical heterostructures with various planar and puckered 2D materials except for single-layer GeSe which gives rise to a type-I band alignment. Moreover, the electronic properties of single-layer Ge3N4 are investigated under applied external in-plane strain. It is shown that while the indirect gap behavior of Ge3N4 is unchanged by the applied strain, the energy band gap increases (decreases) with tensile (compressive) strain. © 2021 Elsevier B.V.Article Citation - WoS: 5Citation - Scopus: 6Boosting Up Printability of Biomacromolecule Based Bio-Ink by Modulation of Hydrogen Bonding Pairs(Elsevier Ltd., 2020) Köksal, Büşra; Önbaş, Rabia; Başkurt, Mehmet; Şahin, Hasan; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes low dose UV curable and bioprintable new bioink made of hydrogen bond donor-acceptor adaptor molecule 2-isocyanatoethyl methacrylate (NCO)modified gelatin (NCO-Gel). Our theoretical calculations demonstrate that insertion of 2-isocyanatoethyl methacrylate doubles the interaction energy (500 meV) between gelatin chains providing significant contribution in interchain condensation and self-organization as compared to methacrylic anhydride modified gelatin (GelMA). The NCO-Gel exhibits peak around 1720 cm?1 referring to bidentate hydrogen bonding between H-NCO and its counterpart O[dbnd]CN[sbnd]H. These strong interchain interactions drive chains to be packed and thereby facilitating UV crosslinking. The NCO-Gel is exhibiting a rapid, 10 s gelation process by the exposure of laser (3 W, 365 nm). The dynamic light scattering characterization also reveals that NCO-Gel has faster sol to gel transition as compared to GelMA depending on the UV curing time. The NCO-Gel was found to be more firm and mechanically strong that provides advantages in molding as well as bioprinting processes. Bioprinted NCO-Gel has shown sharp borders and stable 3D geometry as compared to GelMA ink under 10 s UV curing time. The cell viability tests confirm that NCO-Gel facilitates cell proliferation and supports cell viability. We foresee that NCO-Gel bioink formulation provides a promising opportunity when low dose UV curing and rapid printing are required. © 2020 Elsevier LtdArticle Citation - WoS: 7Citation - Scopus: 7Fabrication of a Postfunctionalizable, Biorepellent, Electroactive Polyurethane Interface on a Gold Surface by Surface-Assisted Polymerization(American Chemical Society, 2020) Özenler, Sezer; Sözen, Yiğit; Şahin, Hasan; Yıldız, Ümit HakanThis study describes surface-assisted (SurfAst) urethane polymerization, providing a modular/postfunctionalizable, biorepellent, electroactive similar to 10 to 100 nm-thick polyurethane (PU) interface on a gold surface. SurfAst is a functionalization methodology based on sequential incubation steps of alkane diisocyanates and alkanediol monomers. The gold surface is functionalized by alkane diisocyanates in the first incubation step, and our theoretical calculations reveal that while the isocyanate group atoms (N, C, and O) at one end of the molecule exhibits strong interactions (similar to 900 meV) with surface atoms, the other end group remains unreacted. After the first incubation step, sequential alkanediol and alkane diisocyanate incubations provide formation of the PU interface. The extensive analysis of the PU interface has been conducted via X-ray photoelectron spectroscopy, and the chemical mapping verifies that the interface is made of PU moieties. The topographical analysis of the surface conducted by the atomic force microscopy shows that the PU interface consists of mostly a nanoporous texture with 150 nm total roughness. The adherence force mapping of the PU interface reveals that the nanoporous matrix exhibits an adhesion force of about 14 nN. The electrostatic force microscopy characterizing long-range electrostatic interactions (40 nm) shows that the PU interface has been attracted by positively charged species as compared to negative objects. Finally, it is demonstrated that the PU interface is readily postfunctionalizable by polyethylene glycol (PEG 1000), serving as a biorepellent interface and preserving electroactivity. We foresee that SurfAst polymerization will have potential for the facile fabrication of a postfunctionalizable and modular biointerface which might be utilized for biosensing and bioelectronic applications.