Photonics / Fotonik

Permanent URI for this collectionhttps://hdl.handle.net/11147/2590

Browse

Filters

2018 - 201972020 - 202417

Settings

Author: search.filters.author.Balcı, Sinan

Search Results

Now showing 1 - 10 of 24
  • Article
    Citation - WoS: 7
    Citation - Scopus: 7
    Breaking the Boundaries of the Goldschmidt Tolerance Factor With Ethylammonium Lead Iodide Perovskite Nanocrystals
    (American Chemical Society, 2024) Güvenç, Çetin Meriç; Toso, Stefano; Ivanov, Yurii P.; Saleh, Gabriele; Balcı, Sinan; Divitini, Giorgio; Manna, Liberato
    We report the synthesis of ethylammonium lead iodide (EAPbI3) colloidal nanocrystals as another member of the lead halide perovskites family. The insertion of an unusually large A-cation (274 pm in diameter) in the perovskite structure, hitherto considered unlikely due to the unfavorable Goldschmidt tolerance factor, results in a significantly larger lattice parameter compared to the Cs-, methylammonium- and formamidinium-based lead halide perovskite homologues. As a consequence, EAPbI3 nanocrystals are highly unstable, evolving to a nonperovskite delta-EAPbI3 polymorph within 1 day. Also, EAPbI3 nanocrystals are very sensitive to electron irradiation and quickly degrade to PbI2 upon exposure to the electron beam, following a mechanism similar to that of other hybrid lead iodide perovskites (although degradation can be reduced by partially replacing the EA+ ions with Cs+ ions). Interestingly, in some cases during this degradation the formation of an epitaxial interface between (EA x Cs1-x )PbI3 and PbI2 is observed. The photoluminescence emission of the EAPbI3 perovskite nanocrystals, albeit being characterized by a low quantum yield (similar to 1%), can be tuned in the 664-690 nm range by regulating their size during the synthesis. The emission efficiency can be improved upon partial alloying at the A site with Cs+ or formamidinium cations. Furthermore, the morphology of the EAPbI3 nanocrystals can be chosen to be either nanocube or nanoplatelet, depending on the synthesis conditions.
  • Article
    Citation - WoS: 9
    Citation - Scopus: 9
    Non-Hermitian Hamiltonians for Linear and Nonlinear Optical Response: a Model for Plexcitons
    (AIP Publishing LLC, 2023) Finkelstein-Shapiro, Daniel; Mante, Pierre-Adrien; Balcı, Sinan; Zigmantas, Donatas; Pullerits, Tonu
    In polaritons, the properties of matter are modified by mixing the molecular transitions with light modes inside a cavity. Resultant hybrid light-matter states exhibit energy level shifts, are delocalized over many molecular units, and have a different excited-state potential energy landscape, which leads to modified exciton dynamics. Previously, non-Hermitian Hamiltonians have been derived to describe the excited states of molecules coupled to surface plasmons (i.e., plexcitons), and these operators have been successfully used in the description of linear and third order optical response. In this article, we rigorously derive non-Hermitian Hamiltonians in the response function formalism of nonlinear spectroscopy by means of Feshbach operators and apply them to explore spectroscopic signatures of plexcitons. In particular, we analyze the optical response below and above the exceptional point that arises for matching transition energies for plasmon and molecular components and study their decomposition using double-sided Feynman diagrams. We find a clear distinction between interference and Rabi splitting in linear spectroscopy and a qualitative change in the symmetry of the line shape of the nonlinear signal when crossing the exceptional point. This change corresponds to one in the symmetry of the eigenvalues of the Hamiltonian. Our work presents an approach for simulating the optical response of sublevels within an electronic system and opens new applications of nonlinear spectroscopy to examine the different regimes of the spectrum of non-Hermitian Hamiltonians.
  • Article
    Citation - WoS: 6
    Citation - Scopus: 6
    Polar Solvent-Free Room Temperature Synthesis of Cspbx3 (x = Br, Cl) Perovskite Nanocubes
    (Royal Society of Chemistry, 2023) Güvenç, Çetin Meriç; Kocabaş, Aşkın; Balcı, Sinan
    Conventionally, colloidal lead halide perovskite nanocubes have been synthesized by the hot-injection or ligand-assisted reprecipitation (LARP) methods. We herein demonstrate a polar solvent-free room temperature method for the synthesis of CsPbX3 (X = Br, Cl) nanocubes. In addition to the commonly used ligand pair of oleylamine and oleic acid, guanidinium (GA) has been used to passivate the surface of the nanocrystals. Our study demonstrates that GA inhibits the formation of low dimensional structures such as nanowires and nanoplatelets and further supports the formation of perovskite nanocubes. In fact, GA diminishes the restricted monomer-addition effect of long-chain oleylammonium (OLAM) ions to the nanocrystal. We show that above a critical GA/OLAM molar ratio, the synthesis yields homogeneous CsPbX3 (X = Br, Cl) nanocubes. Importantly, we observe the nucleation and growth kinetics of the GA-assisted CsPbBr3 nanocube formation by using in situ absorption and photoluminescence (PL) measurements. Small nanocrystals with an excitonic absorption peak at around 435 nm and photoluminescence (PL) maxima at 447 nm were nucleated and continuously shifted to longer wavelengths during the growth period. Crucially, our method allows the synthesis of CsPbCl3 nanocubes at room temperature without using polar organic solvents. The synthesized CsPbBr3, CsPb(Cl0.5Br0.5)3, and CsPbCl3 nanocubes have PL peaks at 508 nm, 443 nm, and 405 nm, photoluminescence quantum yields (PLQY) of 85%, 58% and 5%, and lifetimes of 18.98 ns, 18.97 ns, and 14.74 ns, respectively.
  • Article
    Citation - WoS: 49
    Citation - Scopus: 54
    Highly Porous Poly(o-Phenylenediamine) Loaded Magnetic Carboxymethyl Cellulose Hybrid Beads for Removal of Two Model Textile Dyes
    (Springer, 2022) Arıca, Tuğçe Aybüke; Balcı, Fadime Mert; Balcı, Sinan; Arıca, Mehmet Yakup
    Ensuring the removal of complex dyes from wastewater is a topic of great interest as it is vital for the environment. The present study reports a facile preparation method for poly(o-phenylenediamine) [p(o-PDA)] micro-particles loaded to magnetic carboxymethyl cellulose (CMC) hydrogel beads as adsorbents. The prepared products were characterized by FTIR, TGA, VSM, SEM, BET, and zeta sizer. The Fe3O4@p(o-PDA)@CMC beads were used for the removal of Reactive Blue 4 (RB-4) and Congo Red (CR) textile dyes from an aqueous medium. Different factors, such as adsorbent dose, initial pH, ionic strength, contact time, temperatures, and initial RB-4 and CR concentrations were examined. The maximum adsorption capacities of the RB-4 dye and CR at optimum pH 5 reached 398.7 and 524.6 mg/g in 120 min, respectively. The adsorption of RB-4 and CR on the hybrid magnetic beads can be due to the electrostatic, hydrogen bonding, and π-π interactions. Moreover, the magnetic hybrid beads showed easy regeneration ability and good reusability. The adsorbent can be a very good candidate for the efficient removal of micro-pollutant from wastewater.
  • Article
    Citation - WoS: 84
    Citation - Scopus: 82
    Topological Engineering of Terahertz Light Using Electrically Tunable Exceptional Point Singularities
    (American Association for the Advancement of Science, 2022) Ergöktaş, M. Said; Soleymani, Sina; Kakenov, Nurbek; Wang, Kaiyuan; Smith, Thomas B.; Bakan, Gökhan; Balcı, Sinan; Principi, Alessandro; Novoselov, Kostya S.; Özdemir, Şahin K.; Kocabaş, Çoşkun
    The topological structure associated with the branch point singularity around an exceptional point (EP) can provide tools for controlling the propagation of light. Through use of graphene-based devices, we demonstrate the emergence of EPs in an electrically controlled interaction between light and a collection of organic molecules in the terahertz regime at room temperature. We show that the intensity and phase of terahertz pulses can be controlled by a gate voltage, which drives the device across the EP. Our electrically tunable system allows reconstruction of the Riemann surface associated with the complex energy landscape and provides topological control of light by tuning the loss imbalance and frequency detuning of interacting modes. Our approach provides a platform for developing topological optoelectronics and studying the manifestations of EP physics in light-matter interactions.
  • Article
    Citation - WoS: 17
    Citation - Scopus: 19
    Strong Coupling of Carbon Quantum Dots in Liquid Crystals
    (American Chemical Society, 2022) Sarısözen, Sema; Polat, Nahit; Mert Balcı, Fadime; Güvenç, Çetin Meriç; Kocabaş, Çoşkun; Yağlıoğlu, Halime Gül; Balcı, Sinan
    Carbon quantum dots (CDs) have recently received a tremendous amount of interest owing to their attractive optical properties. However, CDs have broad absorption and emission spectra limiting their application ranges. We herein, for the first time, show synthesis of water-soluble red emissive CDs with a very narrow line width (∼75 meV) spectral absorbance and hence demonstrate strong coupling of CDs and plasmon polaritons in liquid crystalline mesophases. The excited state dynamics of CDs has been studied by ultrafast transient absorption spectroscopy, and CDs display very stable and strong photoluminescence emission with a quantum yield of 35.4% and a lifetime of ∼2 ns. More importantly, we compare J-aggregate dyes with CDs in terms of their absorption line width, photostability, and ability to do strong coupling, and we conclude that highly fluorescent CDs have a bright future in the mixed light-matter states for emerging applications in future quantum technologies.
  • Article
    Citation - WoS: 7
    Citation - Scopus: 6
    L2[gaxfa1–xpbi3]pbi4 (0 ≤ X ≤ 1) Ruddlesden–popper Perovskite Nanocrystals for Solar Cells and Light-Emitting Diodes
    (American Chemical Society, 2022) Güvenç, Çetin Meriç; Tunç, İlknur; Balcı, Sinan
    The main challenges to overcome for colloidal 2D Ruddlesden–Popper (RP) organo-lead iodide perovskite nanocrystals (NCs) are phase instability and low photoluminescence quantum yield (PLQY). Herein, we demonstrate colloidal synthesis of guanidinium (GA)-L2[GAPbI3]PbI4, formamidinium (FA)-L2[FAPbI3]PbI4, and GA and FA alloyed L2[GA0.5FA0.5PbI3]PbI4 NCs without using polar or high boiling point nonpolar solvents. Importantly, we show that optical properties and phase stability of L2[APbI3]PbI4 NCs can be affectively tuned by alloying with guanidinium and formamidinium cations. Additionally, the band gap of NCs can be rapidly engineered by bromide ion exchange in L2[GAxFA1–xPbI3]PbI4 (0 ≤ x ≤ 1) NCs. Our approach produces a stable dispersion of L2[FAPbI3]PbI4 NCs with 12.6% PLQY that is at least three times higher than the previously reported PLQY in the nanocrystals. Furthermore, L2[GAPbI3]PbI4 and L2[GA0.5FA0.5PbI3]PbI4 NC films exhibit improved ambient stability over 10 days, which is significantly higher than L2[FAPbI3]PbI4 NC films, which transform to an undesired 1D phase within 6 days. The colloidally synthesized guanidinium- and formamidinium-based 2D RP organo-lead iodide perovskite NCs with improved stability and high PLQY demonstrated in this study may find applications in solar cells and light-emitting diodes. Therefore, large A-site cation-alloyed 2D RP perovskite NCs may provide a new way to rationalize high-performance and stable perovskite solar cells and light-emitting diodes.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 1
    Transition Metal Salt Promoted, Green, and High-Yield Synthesis of Silver Nanowires for Flexible Transparent Conductive Electrodes
    (Wiley-Blackwell, 2021) Sarısözen, Sema; Tertemiz, Necip Ayhan; Arıca, Tuğçe Aybüke; Polat, Nahit; Kocabaş, Çoşkun; Mert Balcı, Fadime; Balcı, Sinan
    Silver nanowires (AgNWs) have attracted considerable interest from both academia and industry owing to their excellent electrical, optical, and chemical properties. For large-scale synthesis of AgNWs, the polyol method involving ethylene glycol, a toxic alcohol, has been widely used. We herein report on a facile, green, high yield, transition metal salt promoted, open atmosphere method for the synthesis of high quality AgNWs in a glycerol-water mixture. We have shown that transition metal salts have a strong influence on the morphology of AgNWs. Importantly, in the presence of copper(II) chloride, AgNWs with a high aspect ratio of around 400 (length, 36 μm; diameter, 90 nm) were obtained. Additionally, for the first time, we have demonstrated AgNWs based flexible transparent conductive electrodes (TCEs) on poly(sodium 4-styrenesulfonate) (PSS) treated polyethylene terephthalate (PET) substrate with a sheet resistance of 34 Ω/sq and transmittance of 91 % at 550 nm. The PSS layer on the PET substrate generated a highly hydrophilic surface, which boosts interaction of AgNWs with the PET surface. We envision that our results would play a significant role both in the synthesis of AgNWs with high aspect ratio and also in designing new rigid and flexible TCEs having high transmittance and low sheet resistance for applications especially in printable solar cells, organic light emitting diodes, and high performance flexible electronics.
  • Article
    Citation - WoS: 35
    Citation - Scopus: 36
    Understanding Radiative Transitions and Relaxation Pathways in Plexcitons
    (Cell Press, 2021) Finkelstein-Shapiro, Daniel; Mante, Pierre-Adrien; Sarısözen, Sema; Wittenbecher, Lukas; Minda, Iulia; Balcı, Sinan; Pullerits, Tonu
    Molecular aggregates on plasmonic nanoparticles have emerged as attractive systems for the studies of polaritonic light-matter states, called plexcitons. Such systems are tunable, scalable, easy to synthesize, and offer sub-wavelength confinement, all while giving access to the ultrastrong light-matter coupling regime, promising a plethora of applications. However, the complexity of these materials prevented the understanding of their excitation and relaxation phenomena. Here, we follow the relaxation pathways in plexcitons and conclude that while the metal destroys the optical coherence, the molecular aggregate coupled to surface processes significantly contributes to the energy dissipation. We use two-dimensional electronic spectroscopy with theoretical modeling to assign the different relaxation processes to either molecules or metal nanoparticle. We show that the dynamics beyond a few femtoseconds has to be considered in the language of hot electron distributions instead of the accepted lower and upper polariton branches and establish the framework for further understanding.
  • Article
    Citation - WoS: 192
    Citation - Scopus: 194
    Multispectral Graphene-Based Electro-Optical Surfaces With Reversible Tunability From Visible To Microwave Wavelengths
    (Nature Research, 2021) Ergoktas, M. Said; Bakan, Gökhan; Kovalska, Evgeniya; Le Fevre, Lewis W.; Fields, Richard P.; Steiner, Pietro; Yu, Xiaoxiao; Balcı, Sinan
    Optical materials with colour changing abilities have been explored for use in display devices(1), smart windows(2,3) or in the modulation of visual appearance(4-6). The efficiency of these materials, however, has strong wavelength dependence, which limits their functionality to a specific spectral range. Here, we report graphene-based electro-optical devices with unprecedented optical tunability covering the entire electromagnetic spectrum from the visible to microwave. We achieve this non-volatile and reversible tunability by electro-intercalation of lithium into graphene layers in an optically accessible device structure. The unique colour changing capability, together with area-selective intercalation, inspires the fabrication of new multispectral devices, including display devices and electro-optical camouflage coating. We anticipate that these results provide realistic approaches for programmable smart optical surfaces with a potential utility in many scientific and engineering fields such as active plasmonics and adaptive thermal management.