Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
4 results
Search Results
Article Citation - WoS: 28Citation - Scopus: 29Enhancing the Efficiency of Mixed Halide Mesoporous Perovskite Solar Cells by Introducing Amine Modified Graphene Oxide Buffer Layer(Elsevier, 2020) Şahin, Çiğdem; Diker, Halide; Sygkridou, Dimitra; Varlıklı, Canan; Stathatos, EliasIn this study, graphene oxide (GO) was synthesized via Tour method and then modified with two different amine sources that contained different branched alkyl chains. The GO and modified GOs (mGOs) with dihexylamine (DHA) and 2-ethylhexylamine (2EHA) as amine sources were used respectively as buffer layers in mixed halide mesoporous perovskite solar cells (PSCs) in order to examine whether they could improve their performance. GO and mGO samples were characterized by several techniques such as X-Ray Diffraction, X-Ray photoelectron spectroscopy (XPS), Raman analysis and thermal gravimetric analysis (TGA). The preparation of the CH3NH3PbI3-xClx perovskite solution was performed using standard Schlenk techniques under argon atmosphere to attain a homogeneous coverage of the perovskite film. The solar cells with the additional layer of mGO derivatives between perovskite and hole transporting layer showed an improved overall performance compared to the reference devices which was attributed to the enhanced charge carrier transport via the mGOs. In particular, 10% increase to the overall performance of the solar cells was monitored in devices where 2-ethylhexylamine (2EHA) modified GO was used, compared to standard cell without buffer layer. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 29Citation - Scopus: 32Enhanced Capacitive Behaviour of Graphene Based Electrochemical Double Layer Capacitors by Etheric Substitution on Ionic Liquids(Elsevier, 2020) Siyahjani, Shirin; Öner, Saliha; Diker, Halide; Gültekin, Burak; Varlıklı, CananIn this study, we report the effect of etheric substituents in imidazolium and ammonium based ionic liquids (IL) on the performance of electrochemical double layer capacitors (EDLC) consisted of gel polymer electrolyte (GPE) and reduced graphene oxide (RGO) electrode. GPEs contain poly (vinylidene fluoride-hexafluompropylene) (PVDF-HFP) and the ILs. Ammonium and imidazolium based ionic liquids (ILs) differ by their length of etheric groups and etheric group contents, respectively. According to the cyclic voltammetry, galvanostatic chargedischarge and electrochemical impedance spectroscopy measurements, longer etheric group substituted {N-methyl-2- (2-methoxyethoxy)-N,N-bis [2- (2-methoxyethoxy)ethyl] ethan-1-aminium bis(tri-fluoromethanesulfonyl)imide (AMEt-TFSI) and ether substituted (3-allyl-1-[2-(2-methoxyethoxy)ethyl]-1H-imidazole-3-ium bis(trifluommethanesulfonyeimide (AL3IL-TFSI), tender specific capacitances of 250 Fg(-1) and 238 Fg(-1) and energy density values of 61.36 wh kg(-1) and 61.56 wh kg(-1), respectively.Conference Object Citation - WoS: 3Citation - Scopus: 2Fabrication and Characterization of a Solution Processed Flexible Thermal Sensor by Using Chemically Synthesized Go and Rgo(Institute of Electrical and Electronics Engineers Inc., 2019) Bozkurt, Hakan; Diker, Halide; Varlıklı, CananGraphene oxide (GO) was reduced by ascorbic acid which is an environmental-friendly reductant and obtained sample was named as reduced GO (rGO). Stable dispersions of GO and rGO were prepared in N,N-Dimethylformamide (DMF). Compared to GO sample, rGO was determined to have more thermal stability, smaller sheet size and lower surface energy. GO and rGO dispersions were drop-casted on aluminum (Al) coated acetate substrate and used as thermal sensor. Fabricated sensors were tested from 25 °C to 150 °C. The sensors fabricated with GO, were not stabile against driven temperature changes. However, rGO ones, presented no thermal hysteresis effect after the first heating step. This sensor (Al/rGO/Al) acted like an NTC (Negative Temperature Coefficient) thermistor. The resistance of the rGO sensor was changed between 42 k? to 25 k? depending on the test temperature range (25 °C to 150 °C). Average beta value was calculated as 519.7649 K. © 2019 IEEE.Article Citation - WoS: 19Citation - Scopus: 20Controlling the Distribution of Oxygen Functionalities on Go and Utilization of Pedot:pss-Go Composite as Hole Injection Layer of a Solution Processed Blue Oled(Elsevier Ltd., 2017) Diker, Halide; Durmaz, Gamze Belkis; Bozkurt, Hakan; Yeşil, Fatih; Varlıklı, CananGraphene oxide (GO) was synthesis by Tour method. Particle size distribution effects of raw graphite on the resulting structural, morphological, optical and electrical properties of GO samples and their poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) composites are studied for the graphite particle distributions of <150, 45–75 and 25–45 μm. It is determined that particle size of raw graphite have an impact on oxidation degree, the chemical nature of oxygen functional groups on GO and it also affects the lateral size of obtained GO. PEDOT:PSS-GO composites are utilized as hole injection layer (HIL) in a solution process blue organic light emitting diode. Presence of GO caused negative differential resistance (NDR) and NDR intensity was decreased with the decrease in lateral size of GO, increase in the graphite particle size and carboxyl% of obtained GO. All PEDOT:PSS-GO composite based devices presented better performance than the bare PEDOT:PSS based reference device. The maximum luminous and external quantum efficiency values of the device that contain HIL of PEDOT:PSS-GO(150) were more than 40% and 50% higher than that of the reference, respectively. Two folds of increase in these performance values were able to be reached with the concentration optimization of GO/150 in PEDOT:PSS.